MINI Size Electrolytic Capacitors ▏105℃ 1,000Hrs ▏CAZA
SPECIFICATIONS
◆ 105°C, 1000 hours assured, Low LeakageCurrent.
◆ 7mm height.
◆ Use in very compact high temperature industrial equipment.
◆ RoHS Compliance
| Item | Performance | |||||||||||
| Operating Temperature Range | -40°C ~ +105°C | |||||||||||
| Capacitance Tolerance | ± 20% (120Hz, 20°C) | |||||||||||
|
Leakage Current (at 20°C) |
I = 0.002CV or 0.4 ( A) whichever is greater (after 2 minutes) Where, C = rated capacitance in F. V=rated DC working voltage in V. | |||||||||||
|
Dissipaton Factor Tan at 120 Hz,20°C |
Rated Voltage | 4 | 6.3 | 10 | 16 | 25 | 35 | 50 | 63 | |||
| Tan (max) | 0.35 | 0.24 | 0.21 | 0.16 | 0.14 | 0.12 | 0.10 | 0.10 | ||||
| Impedance ratio shall not exceed the values given in the table below | ||||||||||||
|
Low Temperature Characteristics (at 120Hz) |
Rated Voltage | 4 | 6.3 | 10 | 16 | 25 | 35 | 50 | 63 | |||
| Impedance Ratio | Z(-25°C) /Z(+20°C) | 6 | 4 | 3 | 3 | 2 | 2 | 2 | 2 | |||
| Z(-40°C) /Z(+20°C) | 12 | 10 | 6 | 6 | 4 | 4 | 4 | 3 | ||||
|
Load Life Test |
Test Time | 1000 Hrs |
The specification shall be satisfied when the capacitors are restored to 20°C after the rated voltage applied for 1000 hrs at 105°C. |
|||||||||
| CapacitanceChange | ± 20% | |||||||||||
| DissipationFactor | Less than 200% of specified value | |||||||||||
| LeakageCurrent | Within specified value | |||||||||||
|
Shelf Life Test |
Test Time | 500 Hrs |
The specification shall be satisfied when the capacitors are restored to 20°C after exposing them for 500 hrs at 105°C without voltage applied. |
|||||||||
| CapacitanceChange | ± 20% | |||||||||||
| Dissipation Factor | Less than 200% of specified value | |||||||||||
| Leakage Current | Within specified value | |||||||||||
|
Ripple Current & Frequency Multilpiers |
Freq. (Hz)
Cap. F |
60(50) |
120 |
500 |
1K | 10K up | ||||||
| Under 33 | 0.70 | 1.00 | 1.20 | 1.30 | 1.45 | |||||||
| 47 to 220 | 0.80 | 1.00 | 1.10 | 1.15 | 1.20 | |||||||
| Riple Current & Temperature Multipliers | Temperature (°C) | Under 50 | 70 | 85 | 105 | |||||||
| Multipliers | 1.95 | 1.65 | 1.27 | 1.0 | ||||||||
| Standards | Satisfies Characteristic W of JIS C 5141 | |||||||||||
DIMENSIONS & PERMISSABLE RIPPLE CURRENT
Dimension: D×L(mm); Ripple Current: mA/RMS at 120Hz 85°C
| VDC
F Code |
4V (0G) | 6.3V (0J) | 10V (1A) | 16V (1C) | 25V (1E) | 35V (1V) | 50V (1H) | 63V (1J) | |||||||||
| D x L | mA | D x L | mA | D x L | mA | D x L | mA | D x L | mA | D x L | mA | D x L | mA | D x L | mA | ||
| 0.10 | 0R1 | 4 x 7 | 3 | 4 x 7 | 3 | ||||||||||||
| 0.22 | R22 | 4 x 7 | 5 | 4 x 7 | 5 | ||||||||||||
| 0.33 | R33 | 4 x 7 | 6 | 4 x 7 | 6 | ||||||||||||
| 0.47 | R47 | 4 x 7 | 7 | 4 x 7 | 7 | ||||||||||||
| 1 | 010 | 4 x 7 | 10 | 4 x 7 | 10 | ||||||||||||
| 2.2 | 2R2 | 4 x 7 | 16 | 5 x 7 | 19 | ||||||||||||
| 3.3 | 3R3 | 4 x 7 | 18 | 4 x 7 | 20 | 6.3 x 7 | 29 | ||||||||||
| 4.7 | 4R7 | 4 x 7 | 19 | 5 x 7 | 21 | 6.3 x 7 | 24 | 6.3 x 7 | 36 | ||||||||
| 10 | 100 | 4 x7 | 27 | 5 x 7 | 29 | 6.3 x 7 | 32 | 8 x 7 | 40 | ||||||||
| 22 | 220 | 4 x 7 | 36 | 4 x7 | 40 | 6.3 x 7 | 44 | 6.3 x 7 | 49 | ||||||||
| 33 | 330 | 4 x 7 | 33 | 4 x 7 | 41 | 5 x 7 | 44 | 5 x7 | 55 | 6.3 x 7 | 55 | 8 x 7 | 67 | ||||
| 47 | 470 | 4 x 7 | 39 | 5 x 7 | 49 | 6.3 x 7 | 54 | 6.3 x7 | 62 | 8 x 7 | 74 | ||||||
| 100 | 101 | 6.3 x 7 | 59 | 6.3 x 7 | 75 | 8 x 7 | 90 | ||||||||||
LEAD SPACING AND DIAMETER
| D | 4 | 5 | 6.3 | 8 |
| P | 1.5 | 2.0 | 2.5 | 3.5 |
| d | 0.45 | 0.5 | ||
| 1.0 | ||||
| 0.5 | ||||
PART NUMBER EXAMPLE
CAZA 0R1 M 1H SA 040 070
FEATURES
◆ Operating Temperature Range:-40℃~105℃
◆ Load Life Test:105℃,1000hrs
◆ Rated Voltage Range: 4V~ 63V
◆ Nominal Capacitance Range: 0.1uF~100uF
◆ Capacitance Tolerance(20℃，120Hz): ±20%
