Snap-In Electrolytic Capacitors ▏Flame Retardant ▏105℃ 2,000Hrs ▏CAXB

FEATURES
Has a snap-in terminal which can solder to a PCB directly
Suitable for electronic equipment with high voltage circuits.
Printed circuit board terminal snap-in type and lug terminal type available.
Meets UL 94V-0 Flammability
RoHS Compliant

Datasheet-For-Snap-In-Electrolytic-Capacitors-▏Flame-Retardant-▏105℃-2000Hrs-▏CAXB.pdf (1126 downloads)

SPECIFICATIONS

Items	Performance
	CAXA							CAXB
Operating Temperature Range	-25°C ~ +85 °C							-25 °C ~ +105°C
Capacitance Tolerance	+20% (at 120Hz, 20°C)							+20% (at 120Hz,20°C)
Leakage Current (at 20°C)	1=3ûCV or 1.5 mA whichever is smaller (after 5minutes) Where C=rated capacitance inµF V=rated DC working voltage in V
Dissipation Factor (Tan at 120Hz, 20°C)	Rated Voltage (V)					400	450	400	450
	Tan (max)					0.15	0.25	0.25	0.25
Low Temperature Characteristics (at 120Hz)	Impedance ratio shall not exceed the values given in the table below.
	Rated Voltage (V)					400	450	400	450
	Impedance Ratio	Z(-25°C) / Z(+20 °C)				8	12	12	12
Load Life Test
	Test Time		2,000 Hrs
	Capacitance Change		Within +20% of initial value
	Dissipation Factor		Less than 200% of specified value
	Leakage Current		Within specified value
	* The above specifications shall be satisfied when the capacitors are restored to 20°C after the rated voltage with ripple current applied for 2,000 hrs at 85°C/ 105°C.
Shelf Life Test	Test Time		1,000 Hrs
	Capacitance Change		Within +20% of initial value
	Dissipation Factor		Less than 150% of specified value
	Leakage Current		Within specified value
	* The above specifications shall be satisfied when the capacitors are restored to 20°C after exposing them for 1,000 hrs at 85 °C/ 105 °Cwithout voltage applied. The rated voltage shall be applied to the capacitors before themeasurements (Refer to JIS C 5102).
Ripple Current & Frequency Multipliers	Freq. (Hz) WV	60	120	500	1k	10k up
	400 ~ 450	0.8	1.0	1.05	1.10	1.15
Ripple Current & Temperature Multipliers	Temperature (°C)	40	60	70	85	105		Temperature (°C)	40	60	70	85	105
	Multiplier	1.8	1.4	1.2	1.0	1.0		Multiplier	2.5	2.2	2.0	1.8	1.0
Standards	JIS C 5101-4

SNAP-IN TERMINAL TYPE – CAXB

PART NUMBER EXAMPLE

DIMENSIONS & PERMISSABLE RIPPLE CURRENT

Dimension: DxL (mm); Ripple Current: A/rMS at 120 Hz 85°C (LV) / 105°C (LVG)

	V.DC	CAXA Series				CAXB Series
uF		400V (2G)		450V (2W)		400V (2G)		450V (2W)
uF		Size	mA	Size	mA	Size	mA	Size	mA
47	470							22 x 25	0.42
56	560			20 x 25	0.58			22 x 30	0.51
56	560							25 x 25	0.50
68	680	20 x 25	0.71	20 x 30	0.67	22 x 25	0.34	22 x 35	0.61
68	680			22 x 25	0.68			25 x 30	0.59
82	820	20 x 30	0.78	20 x 35	0.76	22 x 30	0.58	22 x 35	0.67
		22 x 25	0.80	22 x 30	0.82			25 x 30	0.65
								30 x 25	0.62
100	101	20 x 30	0.90	20 x 35	0.84	22 x 30	0.64	22 x 40	0.78
		22 x 30	0.94	22 x 35	0.90	25 x 25	0.64	25 x 35	0.76
				25 x 25	0.92			30 x 25	0.69
120	121	20 x 35	1.02	20 x 40	0.94	22 x 35	0.67	22 x 45	0.9
		22 x 30	1.04	22 x 35	1.02	25 x 30	0.69	25 x 40	0.89
		25 x 25	1.08	25 x 30	1.04	30 x 25	0.76	30 x 30	0.81
				30 x 25	1.07			35 x 25	0.72
150	151	20 x 40	1.16	22 x 45	1.12	22 x 40	0.77	25 x 45	1.04
		22 x 35	1.18	25 x 35	1.19	25 x 35	0.78	30 x 35	0.97
		25 x 30	1.21	30 x 30	1.23	30 x 30	0.76	35 x 30	0.86
180	181	22 x 40	1.34	22 x 50	1.26	22 x 45	0.92	25 x 50	1.20
		25 x 35	1.37	25 x 40	1.33	25 x 40	0.81
		30 x 25	1.45	30 x 30	1.38	30 x 30	0.82
						35 x 25	0.90
220	221	22 x 45	1.50	25 x 45	1.51	25 x 45	0.93	30 x 40	1.12
		25 x 35	1.56	30 x 35	1.69	30 x 35	0.91	30 x 45	1.30
		30 x 30	1.58	35 x 30	1.71	35 x 30	1.08	35 x 35	1.00
				30 x 40	1.72			35 x 35	1.11
270	271	25 x 45	1.70	25 x 50	1.65	25 x 50	1.21	30 x 50	1.51
		30 x 35	1.73	30 x 40	1.80	30 x 40	1.10	35 x 45	1.36
				35 x 35	1.81	35 x 35	1.12
330	331	25 x 50	1.90	30 x 40	1.85	30 x 45	1.39	35 x 50	1.58
		30 x 40	1.97	35 x 35	2.05	35 x 35	1.18
		35 x 30	1.95	30 x 45	2.02
390	391	30 x 40	2.15	30 x 50	2.24	30 x 50	1.55
390	391	35 x 35	2.17			35 x 40	1.27
470	471	30 x 50	2.39	35 x 40	2.27	35 x 45	1.62
470	471	35 x 40	2.42
560	561	35 x 45	2.71	35 x 45	2.55
680	681	35 x 50	2.95	35 x 50	2.60

FEATURES
◆ Has a snap-in terminal which can solder to a PCB directly

◆ Suitable for electronic equipment with high voltage circuits.

◆ Printed circuit board terminal snap-in type and lug terminal type available.

◆ Meets UL 94V-0 Flammability

◆ RoHS Compliant

Snap-In Electrolytic Capacitors ▏Flame Retardant ▏105℃ 2,000Hrs ▏CAXB