Polymer electrolytic SMD capacitor CABAH for military & defense
- Suitable for reflow soldering, high-pressure resistant
- Low ESR, high frequency and low
- Military products meet environmental requirements such as vibration and low air pressure. It can be supplied according to the “seven specialty” level, and can also be supplied according to the “general military”
- It is suitable for energy storage, filtering and bypass in electronic circuits in aerospace, aviation, cold, high altitude and ocean.
| Item | characteristic | |||
| Operating temperature range | -55℃~+105℃ | |||
| Rated operating voltage range | 35V~100V | |||
| Nominal capacitance (25°C, 120Hz) | 4.7μF~2200μF | |||
| Allowable deviation of nominal
capacitance (25°C, 120Hz) |
M（±20% ） | |||
| DC leakage current（25℃，2min）*1 | I≤0.02CRUR（μA）
CR: Nominal capacitance (μF); UR: Rated voltage (V) |
|||
| Loss tangent (max) (25°C, 120Hz) | For details, please refer to the “List of Product Specifications and Technical
Parameters” |
|||
| ESR（max）（25℃，100KHz）*2 | For details, please refer to the “List of Product Specifications and Technical
Parameters” |
|||
| High and low temperature characteristics
(impedance ratio, 100KHz) |
-55°C: Z-55°C /Z+25°C≤1.25;105°C:Z105°C/ Z+25°C≤1.25 | |||
|
Durability (High Temperature Test) |
The rated voltage is applied at 105°C for 2000h, and after recovery for 24h, the electrical performance of the rated voltage (25°C±5°C) is tested at room
temperature |
|||
| Rate of change in capacitance | ≤± 20% of the initial measurement | |||
| The loss angle is tangent | ≤ 150% of the initial measurement | |||
| DC leakage current | ≤ initial prescriptive value | |||
| ESR | ≤ 150% of the initial measurement | |||
|
Steady-state damp heat |
60 °C, 90~95%RH storage for 1000h, recovery for 24h, room temperature
(25±5 °C) test, its electrical performance confo rms: |
|||
| Rate of change in capacitance | ≤± 20% of the initial measurement | |||
| The loss angle is tangent | ≤ 150% of the initial specified value | |||
| DC leakage current | ≤ initial prescriptive value | |||
| ESR | ≤ 150% of the initial specified value | |||
FEATURES
◆ 105°C, 1000 hours assured.
◆ Standard micro miniature size with 5mm height.
◆ RoHS Compliance
