cabag cynhwysydd smd electrolytig polymer ar gyfer milwrol & amddiffynfa

Suitable for reflow soldering, high-density installation for small, low-profile
Super interference absorption ability, excellent temperature and frequency
Mae cynhyrchion milwrol yn cwrdd â gofynion amgylcheddol fel dirgryniad a phwysedd aer isel. It can be supplied according to the “seven specialty” wastataom, a gellir ei gyflenwi hefyd yn ôl y “general military” wastataom.
It is suitable for energy storage, filtering and bypass in electronic circuits in aerospace, hedfan, cold, uchder uchel a chefnfor.

Datasheet-for-polymer-electrolytic-SMD-capacitor-CABAG-for-military-defense.pdf (95 downloads)

Eitem	nodweddiadol
amrediad tymheredd gweithredu	-55℃ ~ + 105 ℃
Rated operating voltage range	6.3V~25V
Nominal capacitance (25° C, 120Hz)	10μF~15000μF
Allowable deviation of nominal cynhwysedd (25° C, 120Hz)	M （± 20%）
Cerrynt Gollyngiadau DC （25 ℃，2min）*1	I≤0.02 CRUR (μA) neu 300 μA (pa un bynnag sydd fwyaf) CR: Nominal capacitance (μF); UR: Foltedd wedi'i raddio (V)
Colli tangiad (mwyafswm) (25° C, 120Hz)	For details, please refer to the “List of Product Specifications and Technical Paramedrau”
ESR（max）（25℃，100KHz）*2	For details, please refer to the “List of Product Specifications and Technical Paramedrau”
High and low temperature characteristics (chymhareb, 100KHz)	-55° C: Z-55°C /Z+25°C ≤1.25;105° C:Z105°C /Z+25°C ≤1.25
Durability (High Temperature Test)	The rated voltage is applied at 105°C for 2000h, and after recovery for 24h, the electrical performance of the rated voltage (25° C ± 5 ° C.) is tested at room temperature
		Rate of change in capacitance	≤ ± 20% o'r mesuriad cychwynnol
		The loss angle is tangent	≤ 200% o'r mesuriad cychwynnol
		Cerrynt Gollyngiadau DC	≤ Gwerth rhagnodol cychwynnol
		ESR	≤ 200% o'r mesuriad cychwynnol
Steady-state damp heat	60 ° C, 90~95%RH storage for 1000h, recovery for 24h, room temperature (25±5 °C) test, its electrical performance conforms:
		Rate of change in capacitance	≤ ± 20% o'r mesuriad cychwynnol
		The loss angle is tangent	≤ 150% o'r gwerth penodedig cychwynnol
		Cerrynt Gollyngiadau DC	≤ Gwerth rhagnodol cychwynnol
		ESR	≤ 150% o'r gwerth penodedig cychwynnol

cabag cynhwysydd smd electrolytig polymer ar gyfer milwrol & amddiffynfa

cabag cynhwysydd smd electrolytig polymer ar gyfer milwrol & amddiffynfa

Swyddi cysylltiedig