Cynhwysydd Pŵer Foltedd Isel |0.23~ 0.45KVAC | CJCC
Disgrifiad cyffredinol:
Brand JINPEI o gynhwysydd foltedd isel math hunan-iachâd wedi'i wneud o'r ffilm feteledig ddatblygedig, yn cael ei gynhyrchu'n hollol unol â Safon y Genedl a safon IEC gan iddo gyflwyno technegau ac offer tramor uwch. Mae'r ddyfais yn addas ar gyfer
rhwydwaith pŵer foltedd isel i wella ffactor pŵer, lleihau colled adweithiol a gwella ansawdd y foltedd.
Nodweddion
1.Cyfrol fach, pwysau ysgafn a gosodiad cyfleus
2.Dim gollyngiad olew, dim gwenwynig a diogelu'r amgylchedd
3.Colled isel, ychydig o ymbelydredd a thymheredd isel yn codi
4.Perfformiad hunan-iachâd rhagorol
5.Diogelwch
Cyflwr gweithio
1.Uchder: yn is na 2000m
2.Tymheredd amgylchynol: -25~ 50 ℃ gradd
3.Lleithder: llai na 85%
4.Ar ôl i'r pŵer dorri i ffwrdd, enw da wrth sicrhau bod y foltedd aros yn llai na 10% o'r foltedd sydd â sgôr, fel arfer yr amser hwn yw 200s, felly dylai'r rheolydd rydych chi'n ei ddefnyddio fod â'r swyddogaeth o oedi amser ar gyfer enw da ar ôl torri i ffwrdd.
Data technegol
1.Foltedd wedi'i raddio: 230VAC, 400VAC, 450Allbwn VAC 3.Rated: 1-60 CHWITH
2.Amledd wedi'i raddio: 50Hz neu 60Hz
3.Goddefgarwch cynhwysiant: -5% – +10%
4.Tangent yr ongl golled: Gyda'r foltedd wedi'i raddio amledd pŵer,
5.Gwrthsefyll foltedd: Rhwng terfynell 2.15 foltedd â sgôr amseroedd ar gyfer 5 eiliadau, rhwng terfynellau a chynhwysydd 2 Mae Un + 2Kv neu 3KVAC yn dewis yr un uwch ar gyfer 10 eiliadau.
6.Gor-foltedd uchaf a ganiateir: 110% foltedd wedi'i raddio
7.Gor-gyfredol uchaf a ganiateir: 130% cyfredol wedi'i raddio
8.Nodwedd hunan-ollwng: Llai na 50V mewn 3 munud ar ôl i bŵer dorri i lawr pan oedd y DC yn √2 Un fel o'r blaen wedi cynyddu gan y cynwysorau.
9.Safon berthnasol: GB / T. 12747-2004, IEC60831-2002.
RHAN ENGHRAIFFT NUMPER
| CJCC | Foltedd Rated(kV) | Allbwn Graddedig (chwith) | Cynhwysydd Graddedig(UF) | Graddedig Cyfredol(A) | H.
(mm) |
Terfynell Allbwn | Math o Gregyn |
| 0.23-1-1 | 0.23 | 1 | 60.2 | 4.3 | 125 | M6 | A2 | |
| 0.23-3-1 | 0.23 | 3 | 180.5 | 13 | 125 | M6 | A2 | |
| 0.23-5-1 | 0.23 | 5 | 301 | 21.7 | 125 | M6 | A2 | |
| 0.23-7.5-1 | 0.23 | 7.5 | 451.5 | 32.6 | 210 | M8 | A2 | |
| 0.23-10-1 | 0.23 | 10 | 602 | 43.5 | 210 | M8 | A2 | |
| 0.23-15-1 | 0.23 | 15 | 903 | 65.2 | 210 | M8 | B2 | |
| 0.23-20-1 | 0.23 | 20 | 1203.4 | 87 | 260 | M8 | B2 | |
| 0.23-25-1 | 0.23 | 25 | 1504.3 | 108.7 | 330 | M10 | B2 | |
| 0.23-30-1 | 0.23 | 30 | 1805.2 | 130.4 | 230 | 2*M10 | C | |
| 0.4-4-1 | 0.4 | 4 | 79.6 | 10 | 125 | M6 | A2 | |
| 0.4-5-1 | 0.4 | 5 | 99.5 | 12.5 | 125 | M6 | A2 | |
| 0.4-6-1 | 0.4 | 6 | 119.4 | 15.0 | 125 | M6 | A2 | |
| 0.4-7.5-1 | 0.4 | 7.5 | 149.2 | 18.8 | 125 | M6 | A2 | |
| 0.4-8-1 | 0.4 | 8 | 159.2 | 20.0 | 125 | M6 | A2 | |
| 0.4-10-1 | 0.4 | 10 | 198.9 | 25 | 180 | M6 | A2 | |
| 0.4-12-1 | 0.4 | 12 | 238.7 | 30 | 180 | M6 | A2 | |
| 0.4-14-1 | 0.4 | 14 | 278.5 | 35 | 210 | M6 | A2 | |
|
Tudalen 3-5 |
| 0.4-15-1 | 0.4 | 15 | 298.4 | 37.5 | 210 | M6 | A2 | |
| 0.4-16-1 | 0.4 | 16 | 318.3 | 40 | 210 | M6 | A2 | |
| 0.4-18-1 | 0.4 | 18 | 358.1 | 45.0 | 210 | M8 | B2 | |
| 0.4-20-1 | 0.4 | 20 | 397.9 | 50 | 210 | M8 | B2 | |
| 0.4-22-1 | 0.4 | 22 | 437.7 | 55 | 210 | M8 | B2 | |
| 0.4-25-1 | 0.4 | 24 | 497.4 | 62.5 | 210 | M8 | B2 | |
| 0.4-30-1 | 0.4 | 30 | 596.8 | 75 | 260 | M8 | B2 | |
| 0.4-35-1 | 0.4 | 35 | 696.3 | 87.5 | 330 | M8 | B2 | |
| 0.4-40-1 | 0.4 | 40 | 796.2 | 100 | 330 | M8 | B2 | |
| 0.4-45-1 | 0.4 | 45 | 895.2 | 112.5 | 230 | 2*M10 | C | |
| 0.4-50-1 | 0.4 | 50 | 995.2 | 125 | 230 | 2*M10 | C | |
| 0.4-60-1 | 0.4 | 60 | 1194.3 | 150 | 280 | 2*M10 | C | |
| 0.45-4-1 | 0.45 | 4 | 62.9 | 8.9 | 125 | M6 | A2 | |
| 0.45-5-1 | 0.45 | 5 | 78.6 | 11.1 | 125 | M6 | A2 | |
| 0.45-6-1 | 0.45 | 6 | 94.3 | 13.3 | 125 | M6 | A2 | |
| 0.45-7.5-1 | 0.45 | 7.5 | 117.9 | 16.7 | 125 | M6 | A2 | |
| 0.45-8-1 | 0.45 | 8 | 125.8 | 17.8 | 125 | M6 | A2 | |
|
Tudalen 4-5 |
| 0.45-10-1 | 0.45 | 10 | 157.2 | 22.2 | 180 | M6 | A2 |
| 0.45-12-1 | 0.45 | 12 | 188.6 | 26.7 | 180 | M6 | A2 |
| 0.45-14-1 | 0.45 | 14 | 220.1 | 31.1 | 210 | M8 | A2 |
| 0.45-15-1 | 0.45 | 15 | 235.8 | 33.3 | 210 | M8 | A2 |
| 0.45-16-1 | 0.45 | 16 | 251.5 | 35.6 | 210 | M8 | A2 |
| 0.45-18-1 | 0.45 | 18 | 282.9 | 40 | 210 | M8 | A2 / B2 |
| 0.45-20-1 | 0.45 | 20 | 314.4 | 44.4 | 210 | M8 | A2 / B2 |
| 0.45-22-1 | 0.45 | 22 | 345.8 | 48.9 | 210 | M8 | B2 |
| 0.45-25-1 | 0.45 | 25 | 393.2 | 55.6 | 210 | M8 | B2 |
| 0.45-30-1 | 0.45 | 30 | 471.8 | 66.7 | 210 | M8 | B2 |
| 0.45-35-1 | 0.45 | 35 | 550.2 | 77.8 | 260 | M8 | B2 |
| 0.45-40-1 | 0.45 | 40 | 629.1 | 88.9 | 260 | M8 | B2 |
| 0.45-45-1 | 0.45 | 45 | 707.4 | 100 | 230 | M10 | C |
| 0.45-50-1 | 0.45 | 50 | 786.3 | 111.1 | 230 | 2* M10 | C |
| 0.45-60-1 | 0.45 | 60 | 943.6 | 133.3 | 230 | 2*M10 | C |
inquiry 
inquiry@sh-jinpei.com 
