High Temperature Electrolytic Capacitors ▏130℃ ▏CAEA
FEATURES
1,000 ~ 3,000 hours assured
130°C
For high temperature applications
RoHS Compliant
1,000 ~ 3,000 hours assured
130°C
For high temperature applications
RoHS Compliant
SPECIFICATIONS
Items | Performance | |||||||||||||||
Operating Temperature
Range |
10 ~ 250V | 350 ~ 450V | ||||||||||||||
-40°C ~ +130°C | -25°C ~ 130°C | |||||||||||||||
Capacitance Tolerance | +20% (at 120Hz, 20°C) | |||||||||||||||
Leakage Current (at 20°C) |
Rated Voltage | < 100V | > 100V | |||||||||||||
Time | after 2 minutes | after 1 minutes | ||||||||||||||
Leakage Current |
I = 0.01CV or 3 (µA)
whichever is greater |
CV < 1000
I = 0.1CV+40 (µA) |
CV > 1000
I = 0.04CV+100 (µA) |
|||||||||||||
Where C = rated capacitance in µF. V = rated DC working voltage in V. | ||||||||||||||||
Dissipation Factor | Rated Voltage | 10 | 16 | 25 | 35 | 50 | 63 | 160 | 200 | 250 | 350 | 400 | 450 | |||
(Tan ä at 120Hz,20°C) | Tan (max) | 0.15 | 0.12 | 0.10 | 0.10 | 0.08 | 0.08 | 0.20 | 0.20 | 0.20 | 0.24 | 0.24 | 0.24 | |||
Low Temperature Characteristics
(at 120Hz) |
Impedance ratio shall not exceed the values given in the table below. | |||||||||||||||
Rated Voltage | 10 | 16 | 25 | 35 | 50 | 63 | 160 | 200 | 250 | 350 | 400 | 450 | ||||
Impedanc e
Ratio |
Z (-25) / Z (+20°C) | 3 | 2 | 2 | 2 | 2 | 2 | 3 | 3 | 3 | 6 | 6 | 6 | |||
Z (-40) / Z (+20°C) | 6 | 4 | 4 | 4 | 4 | 4 | 6 | 6 | 6 | – | – | – | ||||
Test Time | 2,000 hrs for φD< φ8mm (125°C)
3,000 hrs for φD> φ10mm (130°C) |
|||||||||||||||
Load Life Test |
Capacitance Change | Within + 20% of initial value | ||||||||||||||
Dissipation Factor | Less than 200% of specified value | |||||||||||||||
Leakage Current | Within specified value | |||||||||||||||
* The above specifications shall be satisfied when the capacitors are restored to 20°C after applied with rated subjected to DC voltage with the rated ripple current is applied for 2.000 / 3,000 hrs at 125°C / 130°C | ||||||||||||||||
Shelf Life Test |
Test Time | 1,000 hours | ||||||||||||||
Capacitance Change | Within + 20% of initial value | |||||||||||||||
Dissipation Factor | Less than 200% of specified value | |||||||||||||||
Leakage Current | Less than 500% of specified value | |||||||||||||||
* The above specifications shall be satisfied when the capacitors are restored to 20°C after exposing them for 1,000 hrs at 130°C
without voltage applied. (The procedures before testing JIS C 5102 4.4) |
||||||||||||||||
Other Standards | JIS C 5101-4 |
LEAD SPACING AND DIAMETER
Unit: mm
φD | 8 | 10 | 12.5 | 16 |
P | 3.5 | 5.0 | 5.0 | 7.5 |
φd | 0.6 | 0.8 | ||
a | 1.0 | 1.5 | ||
R | 0.5 |
PART NUMBER EXAMPLE
CAEA 100 M 1H BK 080 115
FEATURES
◆ 1,000 ~ 3,000 hours assured 130°C
◆ For high temperature applications
◆ RoHS Compliant
