Ceramic Disc capacitor |12V~50V | CCDC
INTRODUCTION
Single layer metalized ceramic disc with resin coating (wax impregnated).
CCDCis suitable for low voltage application and offers larger capacitance values
Single layer metalized ceramic disc with resin coating (wax impregnated).
CCDCis suitable for low voltage application and offers larger capacitance values
FEATURES
Temperature Range:-30~85℃
Rate Volateg:12~50V
Capacitance: 1000pF~470nF
APPLICATION
• Transistorized Circuits
• Low Voltage-by-pass, Coupling.
• Frequency determination where Dielectric losses, Hi-IR and Cap. stability are not of major importance
PART NUMBER EXAMPLE
ELECTRICAL CHARACTERISTICS
| Technical Data | Condition | Specification |
| Capacitance | Measured at 1KHz 0.05 VRMS, 25°C ± 2°C | 0.01uF-0.47uF |
| Operating Temperature | Y5U, Y5V, Y5P | -30°C ~ + 85°C |
| Dissipation Factor
(tanS) |
Y5U, Y5V, Y5P | < 0.05 |
| Insulation Resistance | rated voltage at 25°C ± >°C and 70% R.H max 16Vdc,
product voltage is 25Vdc |
>1GΩ or 20MΩ Farad, whichever is less |
| Encapsulation | Standard | Phenolic Wax Epoxy Coating |
| Solderability of Leads | at least 75 % covered | Solder temperature 250°C ± 5°C Dipping: 3±0.5 sec
(Flur shall be used) |
TEMPERATURE COEFFICIENT CODE
| Temperature Characteristics | ||
| Code | EIA Code | Characteristics. |
| P | Y5P | ±10 % -30°C to +85°C |
| E | Y5U | +22 to -56% -30°C to +85°C |
| F | Y5V | +22 to -82% -30°C to +85°C |
TOLERANCE CODE
| Code | Tolerance |
| C | ±0.25pF |
| D | ±0.5pF |
| F | ±1%pF |
| G | ±2% |
| J | ±5% |
| K | ±10% |
| M | ±20% |
VOLTAGE CODE EXAMPLE
| Code | 1B | 1H |
| WVDC | 12V | 50V |
RADIAL STRAIGHT-LEAD ON TAPE (S56 LEAD CODE)
RADIAL KINK-IN ON TAPE (K56 LEAD CODE)
*Most Popular
| Code | Dimensions |
| D | 11.0 max |
| d | 0.6 ±0.05 |
| P | 12.7 ±1.0 |
| P0 | 12.7 ±0.3 |
| P1 | 3.85 ±0.7 |
| P2 | 6.35 ±1.3 |
| F | 5.0 +0.8 -0.2 |
| Dh | 0 ±2.0 |
| W | 18.0 +1.0 -0.5 |
| W1 | 9.0 +0.75 -0.5 |
| W2 | 3.0 max |
| H | 18.0 +3.0 -0 |
| H0 | 16.0 ±0.5 |
| H1 | 32.25 max |
| K | 1.0 max |
| D0 | 4.0 ±0.2 |
| t | 0.7 ±0.2 |
| L | 11.0 max |
LEAD CODES FOR BULK PACK (CERAMIC DISC ONLY)
| Lead Type | ||||
| A-Straight | C-Kink In | D-Kink Out | ||
| 3.0mm |
4.8mm max 4.8±1mm |
|||
| 4.8mm max | ||||
| 4.8±1mm | ||||
| F-Special Length | Y-Y Formed | S & K-Taped | ||
|
Per Customer Specification |
4.0 mmmax 4.8 ±1.0 mm |
See taping specifications
above. |
||
| Lead Spacing
(±1.00) in mm |
Wire dia.
(±0.05) inmm |
||
| Code | P | Code | d |
| 2 | 2.5 | 4 | 0.48 |
| 5 | 5 | 6 | 0.6 |
| 6 | 6.35 | 7 | 0.65 |
| 7 | 7.5 | 8 | 0.8 |
| 9 | 10.0 | 9 | 1.0 |
| 0 | 12.7 | ||
| A | 15.0 | ||
INTRODUCTION
Single layer metalized ceramic disc with resin
coating (wax impregnated).
CCDCis suitable for low voltage application
and offers larger capacitance values
