Safety Multilayer Ceramic Chip Capacitor SMD-MLCC-CCAC CCAD
The green type capacitors in CCAC/CCAD series are manufactured by using environmentally friendly materials without lead or cadmium.
The terminations are composed of plated nickel and pure tin to feature the superior leaching resistance during soldering.
PART NUMBER
| CCAC | 1808 | B | 102 | K | 3H | T | F | Q |
| JINPEI
Series |
Size | Dielectric | Capacitance | Tolerance | Impulse Voltage | Packaging | Thickness | Customer Code |
| Table 1 | Table 2 | Table 3 | Table 4 | Table 5 | Table 6 | Table 7 | Table 8 | Table 9 |
| Table 1 | PDC Family |
| Code | Description |
| CCAC | Safety X1 & Y2 |
| CCAD | Safety X2 |
| Table 2 | Size | |||||
| Code | Description | Code | Description | Code | Description | |
| 06 | 1206 (3216) | 12 | 1812 (4532) | 20 | 2220 (5750) | |
| 08 | 1808 (4520) | 21 | 2211 (5728) | |||
| Table 3 | Dielectric Material Characteristics | |||
| Code | Description | Code | Description | |
| N | NPO/C0G | B | X7R | |
| Table 4 | Capacitance Rule Code | |||
| Code | Description | Code | Description | |
| 0R5 | 0.5pF | 104 | 104=10×104=100nF | |
| Table 5 | Tolerance | |||||
| Code | Description | Code | Description | Code | Description | |
| D | ±0.50pF | G | ±2% | K | ±10% | |
| F | ±1% | J | ±5% | M | ±20% | |
| Table 6 | Impulse Voltage | |||||
| Code | Description | Code | Description | Code | Description | |
|
2E |
2.5KV |
3000V
3U |
2.5KV |
3H | 5KV | |
| 3I | 6KV | |||||
| Table 7 | Packaging Type | |||
| Code | Description | Code | Description | |
| B | Bulk | T | Embossed Tape | |
| Table 8 | Thickness Description | |||||
| Code | Description | Code | Description | Code | Description | |
| C | 1.25±0. 10 mm | E | 1.60±0.20 mm | G | 2.50±0.30 mm | |
| D | 1.40±0. 15 mm | F | 2.00±0.20 mm | H | 2.80±0.30 mm | |
| Table 9 | Customer Code | |||||
| Code | Description | Code | Description | Code | Description | |
| G | RoHscompliant | Q | Anti-Arcing | E | Anti-Bending | |
| H | High reliability | Z | Anti-Arcing+Anti-Bending | |||
GENERAL ELECTRICAL DATA
| Dielectric | C0G | X7R | |
| Size | 1808, 1812, 2211 | 1808, 1812, 2211, 2220 | 1206 |
| Rated voltage | 250Vac | 2.5KVdc | |
|
Capacitance range |
X1/Y2 Class (Impulse 6KV) : 4pF ~ 100pF X1/Y2 Class (Impulse 5KV) : 3pF ~ 720pF X2 Class : 3pF ~ 1000pF |
X1/Y2 Class : 100pF ~ 4700pF X2 Class : 100pF ~ 56000pF |
100pF ~ 1000pF |
|
Capacitance tolerance |
J (±5%) K (±10%) M (±20%) |
||
|
Tan δ |
≤2.5% |
||
|
Capacitance & Tan δ Test condition |
Measured at the condition of 30~70% related humidity | ||
|
For 25°C at ambient temperature |
Preconditioning for Class II MLCC : Perform a heat treatment at 150±10°C for 1 hour, then leave in ambient condition for 24±2 hours before measurement |
||
|
1.0±0.2Vrms, 1.0KHz±10%, at 25°C ambient temperature |
|||
| Insulation resistance | ≥100GΩ or RxC≥1000Ω-F,
whichever is smaller |
≥10GΩ or RxC≥500Ω-F,
whichever is smaller |
|
| Operating temperature | -55°C to +125°C | ||
| Temperature coefficient | ±30ppm /°C | ±15% | |
| Termination | Cu or Ag/Ni/Sn (lead-free termination) | ||
INTRODUCTION
Types of Dielectric Material and Capacitor
◆HIGH FREQUENCY TYPE: The capacitor of this kind dielectric material is considered as ClassⅠcapacitor,
including high frequency COG、COH capacitor and temperature compensating capacitor such as HG, LG, PH,
RH,SH, TH, UJ, SL. The electrical properties of COG、COH capacitor are the most stable one and change invariablly
with temperature, voltage and time. They are suited for applications where low-losses and high-stability are required,
HG，LG，PH，RH，SH，TH，UJ，SLcapacitor’s capacitance changes with temperature.They are suited for applications
where low-losses and temperature compensating circuits.
◆ X7R、X5R、X7S、X6S：X7R、X5R、X7S、X6S material is a kind of material has high dielectric constant. The capacitor
made of this kind material is considered as Class Ⅱ capacitor whose capacitance is higher than that of class Ⅰ.
These capacitors are classified as having a semi-stable temperature characteristic and used over a wide temperature
range, such in these kinds of circuits, DC-blocking, decoupling, bypassing, frequency discriminating etc.
◆ Y5V：The capacitor made of this kind of material is the highest dielectric constant of all ceramic capacitors. They are
used over a moderate temperature range in application where high capacitance is required because of its unstable
temperature coefficient, but where moderate losses and capacitance changes can be tolerated. Its capacitance and
dissipation factors are sensible to measuring conditions, such as temperature and voltage, etc.
◆ Z5U：The capacitor made of this kind of material is considered as ClassⅡ capacitor, whose temperature characteristic
is between that of X7R and Y5V. The capacitance of this kind of capacitor is unstable and sensible to temperature and
voltage. Ideally suited for bypassing and decoupling application circuits operating with low DC bias in the environment approaches to room temperature.
