RF microwave multilayer ceramic chip capacitor MLCC CCHQ
◆ With high Q value, low ESR and high reliability characteristics;
◆Low loss, high capacitance stability, the maximum working frequency up to 3GHz;
◆ Suitable for high frequency circuit, VHF-microwave section, radio frequency and amplifier circuit in all kinds of equipment;
◆Temperature coefficient: NPO: 0 ± 30ppm /℃
◆ Capacitance drift: no more than ± 0.2% or ± 0.05 pF, take the larger one.
◆Quality factor (Q value): greater than 2,000 when the frequency is 1 MHz / 1 KHz
◆ Insulation resistance: at 20℃: 100000M Ω
◆ Operating temperature: -55~125℃
Jinpe i Series of specifications | Corresponding to the ATC series specifications |
CCHQ-0603 | ATC 600S |
CCHQ-0805 | ATC 600F |
CCHQ-0505 | ATC 100A /ATC 700A |
CCHQ – 1111 | ATC 100B |
CCHQ-2525 | ATC 100C |
CCHQ-3838 | ATC 100E |
INTRODUCTION
Types of Dielectric Material and Capacitor
◆HIGH FREQUENCY TYPE: The capacitor of this kind dielectric material is considered as ClassⅠcapacitor,
including high frequency COG、COH capacitor and temperature compensating capacitor such as HG, LG, PH,
RH,SH, TH, UJ, SL. The electrical properties of COG、COH capacitor are the most stable one and change invariablly
with temperature, voltage and time. They are suited for applications where low-losses and high-stability are required,
HG,LG,PH,RH,SH,TH,UJ,SLcapacitor’s capacitance changes with temperature.They are suited for applications
where low-losses and temperature compensating circuits.
◆ X7R、X5R、X7S、X6S:X7R、X5R、X7S、X6S material is a kind of material has high dielectric constant. The capacitor
made of this kind material is considered as Class Ⅱ capacitor whose capacitance is higher than that of class Ⅰ.
These capacitors are classified as having a semi-stable temperature characteristic and used over a wide temperature
range, such in these kinds of circuits, DC-blocking, decoupling, bypassing, frequency discriminating etc.
◆ Y5V:The capacitor made of this kind of material is the highest dielectric constant of all ceramic capacitors. They are
used over a moderate temperature range in application where high capacitance is required because of its unstable
temperature coefficient, but where moderate losses and capacitance changes can be tolerated. Its capacitance and
dissipation factors are sensible to measuring conditions, such as temperature and voltage, etc.
◆ Z5U:The capacitor made of this kind of material is considered as ClassⅡ capacitor, whose temperature characteristic
is between that of X7R and Y5V. The capacitance of this kind of capacitor is unstable and sensible to temperature and
voltage. Ideally suited for bypassing and decoupling application circuits operating with low DC bias in the environment approaches to room temperature.