MIL RF microwave multilayer ceramic chip capacitor MLCC CCDA
●It has the characteristics of low loss, high electrical capacity stability and high reliability;
● Suitable for all kinds of equipment in the high frequency circuit, amplification circuit
Temperature coefficient: NPO: 0 ± 30ppm /℃
Capacitance drift: no more than ± 2% or ± 0.05 pF, take the larger
Loss angle tangent: not exceeding 15% at a frequency of 1 MHz / 1 KHz
Insulation resistance (25℃): 100000M Ω
Medium voltage resistance (test surge current does not exceed 50mA): 5 UR
Operating temperature: -55~125℃
| divide into groups | inspecting item | Requires the chapter number | Test method chapter number | sampling plan |
| A divide into groups | Voltage treatment | 3.8 in ZZR-Q / CT 20003-2018 | 4.5.3 in GJB 192B- 2011 | 100% |
|
A divide into groups |
Insulation resistance (125℃) |
3.11 in ZZR-Q / CT 20003- 2018 |
4.5.6 in GJB 192B- 2011 |
In accordance with GJB 192B-2011
Table 6 |
|
A divide into groups |
Visual and mechanical inspection | 3.3 in ZZR-Q / CT 20003- 2018,
.4.1 3，3.28 ，3.29 |
4.5.2 in GJB 192B- 2011 |
In accordance with GJB 192B-2011
Table 6 |
| A divide into groups | solder ability | 3.15 in ZZR-Q / CT 20003- 2018 | 4.4.2 in GJB 192B- 2011 | 13 samples, and 0 failed |
INTRODUCTION
Types of Dielectric Material and Capacitor
◆HIGH FREQUENCY TYPE: The capacitor of this kind dielectric material is considered as ClassⅠcapacitor,
including high frequency COG、COH capacitor and temperature compensating capacitor such as HG, LG, PH,
RH,SH, TH, UJ, SL. The electrical properties of COG、COH capacitor are the most stable one and change invariablly
with temperature, voltage and time. They are suited for applications where low-losses and high-stability are required,
HG，LG，PH，RH，SH，TH，UJ，SLcapacitor’s capacitance changes with temperature.They are suited for applications
where low-losses and temperature compensating circuits.
◆ X7R、X5R、X7S、X6S：X7R、X5R、X7S、X6S material is a kind of material has high dielectric constant. The capacitor
made of this kind material is considered as Class Ⅱ capacitor whose capacitance is higher than that of class Ⅰ.
These capacitors are classified as having a semi-stable temperature characteristic and used over a wide temperature
range, such in these kinds of circuits, DC-blocking, decoupling, bypassing, frequency discriminating etc.
◆ Y5V：The capacitor made of this kind of material is the highest dielectric constant of all ceramic capacitors. They are
used over a moderate temperature range in application where high capacitance is required because of its unstable
temperature coefficient, but where moderate losses and capacitance changes can be tolerated. Its capacitance and
dissipation factors are sensible to measuring conditions, such as temperature and voltage, etc.
◆ Z5U：The capacitor made of this kind of material is considered as ClassⅡ capacitor, whose temperature characteristic
is between that of X7R and Y5V. The capacitance of this kind of capacitor is unstable and sensible to temperature and
voltage. Ideally suited for bypassing and decoupling application circuits operating with low DC bias in the environment approaches to room temperature.
