High Voltage Ceramic Disc capacitor |50V~10KV | CCDB
INTRODUCTION
Single layer metalized ceramic disc with resin coating (wax impregnated) below 1KV or epoxy coated 1KV up.
Range of values extends to much higher values than CBDA
FEATURES
Temperature Range:-55~125℃
Rate Volateg:50~10KV
Capacitance: 80pF~100nF
APPLICATION
•By-Pass & Coupling
Frequency Discriminating Circuits where Q and capacitance stability is not of major importance.
•Filtering, Blocking & Timing
PART NUMBER EXAMPLE
ELECTRICAL CHARACTERISTICS
| Technical Data | Condition | Specification |
| Capacitance | Measured at 1KHz
1.0 ~ 5.0 VRMS, 25°C |
80pF ~ 0.1µF |
|
Operating Temperature |
X7R | -55°C ~ +125°C |
| Y5E, Y5P | -30°C ~ +85°C | |
| Z5U, Z5V | -10°C ~ +85°C | |
| Dissipation Factor
(tan S) |
X7R, Y5E, Y5P, Z5U | < 0.025 |
| Z5V | < 0.05 | |
|
Insulation Resistance |
Rated Voltage at 25°C + >°C and 70%
R.H. max |
>10GΏ or 200MΏ Farad, whichever is less |
| Encapsulation | Standard 1KV andhigher | Phenolic Wax
Epoxy Coating |
|
Solderability of Leads |
at least 75% is covered |
Solder Temperature
250°C + 5°C Dipping: 3+0.5 sec (Flur shall be used) |
TEMPERATURE COEFFICIENT CODE
| Temperature Characteristics | ||
| Code | EIACode | Characteristics |
| M | Z5U | +22 to -56% +10 °C to +85°C |
| V | Z5V | +22 to -82% +10 °C to +85°C |
| G | Y5E | +4.7% -30 °C to+85°C |
| P | Y5P | +10% -30 °C to+85°C |
| E | Y5U | +22 to -56% -30 °C to +85°C |
RADIAL STRAIGHT-LEAD ON TAPE (S56 LEAD CODE)
RADIAL KINK-IN ON TAPE (K56 LEAD CODE)
*Most Popular
| Code | Dimensions |
| D | 11.0 max |
| d | 0.6 ±0.05 |
| P | 12.7 ±1.0 |
| P0 | 12.7 ±0.3 |
| P1 | 3.85 ±0.7 |
| P2 | 6.35 ±1.3 |
| F | 5.0 +0.8 -0.2 |
| h | 0 ±2.0 |
| W | 18.0 +1.0 -0.5 |
| W1 | 9.0 +0.75 -0.5 |
| W2 | 3.0 max |
| H | 18.0 +3.0 -0 |
| H0 | 16.0 ±0.5 |
| H1 | 32.25 max |
| K | 1.0 max |
| D0 | 4.0 ±0.2 |
| t | 0.7 ±0.2 |
| L | 11.0 max |
INTRODUCTION
Single layer metalized ceramic disc with resin
coating (wax impregnated) below 1KV or epoxy
coated 1KV up.
Range of values extends to much higher values
than CBDA
