Discus Ceramic capacitor |12~ V 50v | CCDC
PRAEFATIO
Singulus lamina metallicus discus ceramicus cum resina coating (cera habere admixtum).
CCDCis ad applicationem intentionis humilis idoneae et valores capaciores ampliores praebet
Singulus lamina metallicus discus ceramicus cum resina coating (cera habere admixtum).
CCDCis ad applicationem intentionis humilis idoneae et valores capaciores ampliores praebet
PARS
temperatus range:-30LXXXV ℃ ~
rate Volateg:1250v ~
Capacitance: 1000pF ~ 470nF
APPLICANDIS
• Circuitus Transistorized
• Low intentione-by-transeat, Copulatio.
• Frequency determinatio ubi Dielectric damna, Hi-IR et Cap. stabilitas non maioris momenti
PARS NUMBER EXEMPLUM
CARACTERES
| Technical data | Conditio | Specification |
| Capacitance | Mensurata in 1KHz 0.05 VRMS, 25°C ± 2°C | 0.01Fortuna Imperatrix Mundi-0.47Fortuna Imperatrix Mundi |
| Operating Temperature | Y5U, Y5V, Y5P | -30°C ~ + 85° F |
| Triticum dispersio vitetur
(tanS') |
Y5U, Y5V, Y5P | < 0.05 |
| Nulla Resistentia | rated voltage ad 25°C± >° C and 70% R.H max 16Vdc,
productum voltage est 25Vdc |
>1GΩ vel 20MΩ Parad, quodcumque minus |
| Encapsulation | Standard | Phenolic Cera Epoxy Coating |
| Solderability of Leads | quidem 75 % operuit | Solidus temperatus 250°C ± 5°C Dipping: 3± 0.5 sec
(Flur fuerit utendum) |
TEMPERATURA COEFFICIENS CODEX
| Temperatus Characteres | ||
| Code | EIA Code | Characteres. |
| P | Y5P | ±10 % -30°C ad +85°C |
| E | Y5U | +22 ut -56% -30°C ad +85°C |
| F | Y5V | +22 ut -82% -30°C ad +85°C |
TOLERATIO CODEX
| Code | tolerantia |
| C | ±0.25pF |
| D | ±0.5pF |
| F | ±1%pF |
| G | ±2% |
| J | ± V% |
| K | ± X% |
| M | ° XX% |
EXEMPLUM VOLTAGE CODEX
| Code | 1B | 1H |
| WVDC | 12V | 50V |
RADIUS IAM-plumbum TAENIA (S56 PLUMBUM CODEX)
RADIUS kink-IN DE TAPE (K56 AUCTORITAS CODEX)
*Most Popular
| Code | Dimensiones |
| D | 11.0 max |
| d | 0.6 ±0.05 |
| P | 12.7 ±1.0 |
| P0 | 12.7 ±0.3 |
| P1 | 3.85 ±0.7 |
| P2 | 6.35 ±1.3 |
| F | 5.0 +0.8 -0.2 |
| Ie | 0 ±2.0 |
| W | 18.0 +1.0 -0.5 |
| W1 | 9.0 +0.75 -0.5 |
| W2 | 3.0 max |
| H | 18.0 +3.0 -0 |
| H0 | 16.0 ± 0,5 |
| H1 | 32.25 max |
| K | 1.0 max |
| D0 | 4.0 ±0.2 |
| t | 0.7 ±0.2 |
| I. | 11.0 max |
AUCTORITAS CODES MENSA PACK (CERAMIC DISC modo)
| Type plumbum | ||||
| A-recta | C-Kink In | D-Kink Out | ||
| 3.0mm |
4.8mm max 4.8±1mm |
|||
| 4.8mm max | ||||
| 4.8±1mm | ||||
| F-Special Longitudo | Y-Y Formatus | S & K-Taped | ||
|
Per Customer Specification |
4.0 mmmax 4.8 ±1.0 mm |
Vide taping specifications
supra. |
||
| Duc Spacing
(±1.00) in mm * |
Filum dies.
(±0.05) inmm |
||
| Code | P | Code | d |
| 2 | 2.5 | 4 | 0.48 |
| 5 | 5 | 6 | 0.6 |
| 6 | 6.35 | 7 | 0.65 |
| 7 | 7.5 | 8 | 0.8 |
| 9 | 10.0 | 9 | 1.0 |
| 0 | 12.7 | ||
| A | 15.0 | ||
inquiry 
inquiry@sh-jinpei.com 
