Asker için Snap-In Electrolitik Kapasitör Güvenilirlik Endeksi CADAC & savunma

Solder pin structure, high pressure product, küçük hacim。
There are reliability indicators, and there are five levels of failure rate（λ≤1×10-5）
It meets the environmental requirements of the national military standard GJB603A-2021
such as vibration, low pressure, and humidity resistance

It is suitable for filtering and energy storage in the electronic unified circuit of aerospace, havacılık, alpine, yüksek irtifa ve okyanus

Boş sekme. Buraya içerik eklemek için sayfayı düzenleyin.

Kalem	karakteristik
Çalışma sıcaklık aralığı	-40℃ ~ 105 ℃
Nominal çalışma voltajı aralığı	400V ~ 450V
Nominal kapasitans aralığı	82~1000μF
Allowable deviation of nominal kapasite	M （± ）		（25 ℃，100HZ）
DC leakage curren（t 25℃，5Min）	l≤0.01CRUR（μA）		CR：Nominal kapasitans (uF); UR: anma gerilimi (V)
DFδ (maksimum)	For details, please refer to the “List of Product Specifications and Technical Parameters” （25 ℃，100HZ）
Temperature characteristics (100Hz, impedance ratio)	Z-40℃/Z+25℃≤12
Rated ripple current	For details, please refer to the “List of Product Specifications and Technical Parameters” （105℃，100HZ）
Dayanıklılık (Yüksek sıcaklık testi)	The rated voltage with ripple current is applied at 105℃ for 2000h, and after recovery for 24h, the rated voltage with ripple current is tested at room temperature (25℃±5℃), and its electrical performance is in accordance with the test：
		Kapasitansta değişim oranı		≤±20% Initial measurements
		DC Sızıntı Akımı		≤Initiyal reçeteli değer
		The DF		≤200% Initial measurements
Yüksek sıcaklıklarda saklayın	Left at 105℃ for 1000h, after the test, the normal temperature (25℃±5℃) was restored to the test, and its electrical properties were in line with：
		Kapasitansta değişim oranı		≤±15% Initial measurements
		DC Sızıntı Akımı		≤200% Initial prescriptive value
		The DF		≤200% Initial measurements