Metallisearre Polyester Film Kondensator Mini Grutte | CDAF
YNLIEDING
CDAF Series wurde konstruearre mei metalized polyester film dielectric, koperply lead en epoksyhars poedercoating. Se binne geskikt foar blokkearjen, koppeling, ûntkoppelje, filterjen, bypass timing circuit en ideaal foar gebrûk yn telekommunikaasje apparatuer, gegevens ferwurkjen apparatuer, yndustriële ynstrumint, automatyske kontrôle systemen en oare algemiene elektroanyske apparatuer.
FEATURES
◆ Operating Temp. Berik :-40° C ~ + 125 ° C (Derates oer 105 ° C)
◆ Kapasitaasjeberik:0.001~ 1.2uF
◆ Capacitance Tolerânsje: J = 5% K = 10% M = 20%
◆ Rated Voltage V R 85 ° C: 50V, 63V,100Vdc, 250Vdc, 400Vdc, 450Vdc, 630Vdc,1000Vdc
PART NUMMER Foarbyld
TOLERÂNSJE
| Koade | Tolerânsje |
| J | ± 5% |
| K | ± 10% |
| M | ± 20% |
LEAD STYLE FOARLS
KAPASITANSJE KODE
| F | 0.01 | 0.047 | 0.1 | 0.47 | 1.0 |
| pF | 10000 | 47000 | 100000 | 470000 | – |
| Koade | 103 | 473 | 104 | 474 | 105 |
RATED VOLTAGE
| WV | 50 | 63 | 100 | 250 | 400 | 630 |
| Koade | 1H | 1J | 2IN | 2E | 2G | 2J |
VERPAKKING
| Meth | fan | Bulk | Munysje | Reel |
| Koade | B | IN | R | |
LEAD LENGTE FAN SEATING PLANE
(Bulk Pack)
| mm | 5 | 10 | 15 | 20 | 25 |
| Koade | 050 | 100 | 150 | 200 | 250 |
TAPE KODE (Lead ôfstân fan tape)
| Spacin | g | 5mm |
| Packing | A of R | |
| Koade | RT1 (Sjoch Diagram) | |
LEAD STYLE
| Koade | Styl |
| S | Rjocht |
| K | Kink-In (Stean ôf) |
| F | Form út |
| ik | Form yn |
** Foar Bulk ferpakking mei foarme leads, add in ekstra 3 digit lead spacing koade oan 'e ein fan diel nûmer.
MAXIMUM DIMENSJES (mm)
| W. V. | 50 / 63VDC (1H/1J) | 100VDC(2IN) | 250VDC(2E) | 400VDC(2G) | 630VDC (2J) | ||||||||||||||||||||
| ( μF) | koade | W | H | T | P | d | W | H | T | P | d | W | H | T | P | d | W | H | T | P | d | W | H | P | d |
| 0.001 | 102 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 5 | 0.5 |
| 0.0022 | 122 | 6.5 | 6.5 3.5 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 5 | 0.5 | ||
| 0.0033 | 332 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 5 | 0.5 |
| 0.0047 | 472 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 5 | 0.5 |
| 0.0056 | 562 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | ||||
| 0.0068 | 682 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | ||||
| 0.0082 | 822 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | ||||
| 0.010 | 103 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | ||||
| 0.012 | 123 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | |||||||||
| 0.015 | 153 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | |||||||||
| 0.018 | 183 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | |||||||||
| 0.022 | 223 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 3.5 | 5 | 0.5 | |||||||||
| 0.027 | 273 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 7.5 | 9.5 | 3.5 | 5 | 0.5 | |||||||||
| 0.033 | 333 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 7.5 | 9.5 | 4.5 | 5 | 0.5 | |||||||||
| 0.039 | 393 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 7.5 | 9.5 | 4.5 | 5 | 0.5 | |||||||||
| 0.047 | 473 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 7.5 | 9.5 | 4.5 | 5 | 0.5 | |||||||||
| 0.056 | 563 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 7.5 | 9.5 | 4.5 | 5 | 0.5 | |||||||||
| 0.068 | 683 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 7.5 | 9.5 | 4.5 | 5 | 0.5 | |||||||||
| 0.082 | 823 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 6.5 | 6.5 | 4.0 | 5 | 0.5 | 7.5 | 9.5 | 4.5 | 5 | 0.5 | |||||||||
| 0.1 | 104 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 9.5 | 4.5 | 5 | 0.5 | |||||||||
| 0.12 | 124 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 10 | 5.0 | 5 | 0.5 | |||||||||
| 0.15 | 154 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 10 | 5.0 | 5 | 0.5 | |||||||||
| 0.18 | 184 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 10 | 6.0 | 5 | 0.5 | |||||||||
| 0.22 | 224 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 10 | 6.0 | 5 | 0.5 | |||||||||
| 0.27 | 274 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 10.5 | 7.0 | 5 | 0.5 | |||||||||
| 0.33 | 334 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 11 | 7.0 | 5 | 0.5 | |||||||||
| 0.39 | 394 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 6.5 | 6.5 | 4.5 | 5 | 0.5 | 7.5 | 12 | 8.0 | 5 | 0.5 | |||||||||
| 0.47 | 474 | 7.0 | 7.5 | 4.5 | 5 | 0.6 | 7.0 | 7.5 | 4.5 | 5 | 0.6 | 7.5 | 12 | 8.5 | 5 | 0.5 | |||||||||
| 0.56 | 564 | 7.0 | 8.5 | 5.0 | 5 | 0.6 | 7.0 | 8.5 | 5.0 | 5 | 0.6 | ||||||||||||||
| 0.68 | 684 | 7.0 | 8.5 | 5.0 | 5 | 0.6 | 7.0 | 8.5 | 5.0 | 5 | 0.6 | ||||||||||||||
| 1.0 | 824 | 7.0 | 8.5 | 5.0 | 5 | 0.6 | 7.0 | 10 | 6.0 | 5 | 0.6 | ||||||||||||||
| 1.5 | 155 | 7.0 | 10.0 | 6.5 | 5 | 0.5 | 7.0 | 10 | 6.0 | 5 | 0.6 | 17 | 15 | 7.0 | 15 | 0.8 | |||||||||
| 2.2 | 225 | 7.0 | 10.0 | 6.5 | 5 | 0.6 | 7.0 | 10.5 | 7.0 | 5 | 0.6 | 17 | 15.5 | 6.5 | 15 | 0.8 | |||||||||
OPTREDEN
| Ûnderdiel | Metalisearre Polyester |
| Kapasiteit Drift | Fytsen troch it wurktemperatuerberik 2%. |
| Feuchte Test | Sil de test fan R.H. 95% op 40 ° C foar 1000 oeren. C < 5% DF < 1.2% IR > 10000MΩ |
| Load Test | Sil tsjin in test voltage by 140% fan W.V. foar 1000 oeren op 85 ° C. C < 5% DF < 1.2% IR > 5000MΩ |
| Lead Pull Test | Sil wjerstean in pull fan 1.5Kg tapast axialy foar 10 sekonden. |
|
Lead Bend Test |
Sil twa syklusen oanhâlde sûnder te brekken as jo in lading fan 0.5Kg oan 'e ein fan' e lieding befestigje en dan de kondensator 90º draaie út 'e rjochting fan' e leadútgong. Dan 180 yn tsjinoerstelde rjochting, dan werom nei it begjinpunt. |
| Solderability | Underdompele yn gesmolten solder (230 + 0.5 sek.) nei testen, de wûne lead en gat yn 'e wûne lead sil wurde bedutsen en fol mei solder. It sil lestich wêze om mei de finger te ûntspannen. |
| Dielektryske sterkte | Sil ferneare 200% of 160% fan nominearre spanning by 25 ° C foar 1 minút mei hjoeddeistige beheinende ferset fan 1 Ω
/ V. |
SOLDERING
It gebiet ûnder de kromme is de rekommandearre soldering tiid & temp. foar de werjûn materialen
RADIAL TAPING
SPESIFIKASJES
| Beskriuwing |
Letter |
Diminsje (mm) |
| RT1 | ||
| Lead Wire Diameter | d | 0.5 / 0.6 |
| Tapping Pitch | P | 12.7 |
| Feed Hole Pitch | PO | 12.7 |
| Centrering fan de Lead Wire | P1 | 3.85 |
| Centering fan it lichem | P2 | 6.35 |
| Lead Spacing (Pitch) | F | 5 |
| Component Alignment | ∆h | 0 |
| Hichte fan Componenet út Tape Center | H | 18.5 |
| Carrier Tape Breedte | W | 18 |
| Hâld Tape Breedte del | WÊR | 6 |
| Hole Posysje | W1 | 9 |
| Hâld Tape Posysje | W2 | 3 |
| Feed Hole Diameter | Dwaan | 4 |
| Tape dikte | t | 0.7 |
| Stal | fig | 1 of 2 |
Opmerking: *Tastimming fan opboude pitch minder as 1mm by de som fan 20 plakken.
*Trochrinnende lege komponint minder as 3 opfolgjende stikken.
*Totaal leech op ien reel minder as 1%.
inquiry 
inquiry@sh-jinpei.com 
