Metallisearre polyesterfilmkondensator | ESR Minimalisearre | SADC
CDAA rige is konstruearre mei polyester film dielectric, aluminium folie elektrodes, koperen lead, en epoksy hars coating. Se binne geskikt foar blokkearjen, by-pass en keppeljen fan DC en sinjaal nei VHF berik, timing circuits,filterjen, en oare algemiene doel gebrûk.
Se binne ek ideaal foar gebrûk yn fersterkers, TV, radio, stereo-apparatuer en oare elektroanyske apparatuer.
FEATURES
◆ Hege fochtigensresistinsje
◆ Unilaterale útlieding
◆ Goede isolearjende prestaasjes
◆ ESR wurdt minimalisearre
◆ Rated Voltage 100 ~ 1200Vdc
PART NUMMER Foarbyld
ELEKTRISKE skaaimerken
| Items | Optreden |
| Operating Voltage Range | 100Vdc, 250Vdc, 400Vdc, 630Vdc, 1200Vdc |
| Rated Temperatuer | -55˚C ~ +105˚C (Degradearret boppe 85˚C) |
| Klimaatkategory | 55 / 105 / 21 |
| Capacitance Range | 0.001 µF ~ 0.27 μF |
| Capacitance Tolerânsje | 5% (J), 10% (K), 20%(M) |
| fersiljen Factor | ≤ 1.0% (1KHz, 20° C) |
| Isolaasje Resistance
Terminal nei Terminal |
≥ 30000MΩ, CR ≤ 0.1μF (20° C, 10V, 1min)
≥ 10000MΩ, CR > 0.1μF (20° C, 100V, 1min) |
| Standert spanning | 2.0UR : (5s) |
SOLDERING
It gebiet ûnder de kromme is de rekommandearre soldering tiid & temp. foar de werjûn materialen.
| (μF) | W.V. DC | 50V (1H) / 63V (1J) / 100V (2IN) | 250V (2E) | 400V (2G) | ||||||||||||
| Koade | W | H | T | P | d | W | H | T | P | d | W | H | T | P | d | |
| 0.001 | 102 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 |
| 0.0012 | 122 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 |
| 0.0015 | 152 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 |
| 0.0018 | 182 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 |
| 0.0022 | 222 | 6.0 | 11.5 | 4.0 | 3.5 | 0.5 | 6.0 | 11.5 | 4.0 | 3.5 | 0.5 | 6.0 | 11.5 | 4.0 | 3.5 | 0.5 |
| 0.0027 | 272 | 6.0 | 11.5 | 4.0 | 3.5 | 0.5 | 6.5 | 12.0 | 4.0 | 3.5 | 0.5 | 7.0 | 13.0 | 4.0 | 4.0 | 0.5 |
| 0.0033 | 332 | 6.0 | 11.5 | 4.0 | 3.5 | 0.5 | 6.5 | 12.0 | 4.0 | 3.5 | 0.5 | 7.0 | 13.0 | 4.5 | 4.5 | 0.5 |
| 0.0039 | 392 | 6.0 | 11.5 | 4.0 | 3.5 | 0.5 | 6.5 | 12.0 | 4.0 | 4.0 | 0.5 | 7.5 | 13.5 | 4.5 | 4.5 | 0.5 |
| 0.0047 | 472 | 6.0 | 11.5 | 4.0 | 3.5 | 0.5 | 6.5 | 12.0 | 4.0 | 4.5 | 0.5 | 8.0 | 13.5 | 4.5 | 4.5 | 0.5 |
| 0.0056 | 562 | 6.0 | 11.5 | 4.0 | 4.0 | 0.5 | 7.0 | 12.0 | 4.0 | 5.0 | 0.5 | 8.0 | 13.5 | 5.0 | 5.5 | 0.5 |
| 0.0068 | 682 | 6.5 | 11.5 | 4.0 | 4.0 | 0.5 | 7.0 | 12.0 | 4.0 | 5.0 | 0.5 | 8.5 | 13.5 | 5.5 | 5.5 | 0.5 |
| 0.0082 | 822 | 7.0 | 11.5 | 4.0 | 4.0 | 0.5 | 8.0 | 13.0 | 4.0 | 5.5 | 0.5 | 9.0 | 15.5 | 5.5 | 5.5 | 0.5 |
| 0.01 | 103 | 7.0 | 11.5 | 4.5 | 4.0 | 0.5 | 8.0 | 13.0 | 5.0 | 5.5 | 0.5 | 9.5 | 15.5 | 6.0 | 5.5 | 0.5 |
| 0.012 | 123 | 7.0 | 11.5 | 4.5 | 4.0 | 0.5 | 8.5 | 13.5 | 5.0 | 5.5 | 0.5 | 10.5 | 15.5 | 6.5 | 6.0 | 0.5 |
| 0.015 | 153 | 7.0 | 11.5 | 4.5 | 4.5 | 0.5 | 8.5 | 13.5 | 5.0 | 5.5 | 0.5 | 10.5 | 15.5 | 6.5 | 6.5 | 0.5 |
| 0.018 | 183 | 7.0 | 12.0 | 4.5 | 4.5 | 0.5 | 9.0 | 14.0 | 6.0 | 6.0 | 0.5 | 11.5 | 17.5 | 7.0 | 7.0 | 0.5 |
| 0.022 | 223 | 8.0 | 12.0 | 4.5 | 5.0 | 0.5 | 9.5 | 14.0 | 6.0 | 6.5 | 0.5 | 11.5 | 17.5 | 7.0 | 7.0 | 0.5 |
| 0.027 | 273 | 8.0 | 13.0 | 5.0 | 5.0 | 0.5 | 10.0 | 15.0 | 6.5 | 6.5 | 0.5 | 12.5 | 18.5 | 7.5 | 7.5 | 0.5 |
| 0.033 | 333 | 8.5 | 13.0 | 5.0 | 5.5 | 0.5 | 10.5 | 15.5 | 6.5 | 6.5 | 0.5 | 12.5 | 18.5 | 7.5 | 7.5 | 0.5 |
| 0.039 | 393 | 9.0 | 13.0 | 5.0 | 5.5 | 0.5 | 11.5 | 15.5 | 7.0 | 7.0 | 0.5 | 14.0 | 19.0 | 8.0 | 8.5 | 0.5 |
| 0.047 | 473 | 9.0 | 13.0 | 5.5 | 5.5 | 0.5 | 11.5 | 16.0 | 7.0 | 7.5 | 0.5 | 14.5 | 19.0 | 8.5 | 9.0 | 0.5 |
| 0.056 | 563 | 9.5 | 13.5 | 5.5 | 6.5 | 0.5 | 12.5 | 16.0 | 8.5 | 8.0 | 0.5 | 14.5 | 21.5 | 8.5 | 9.0 | 0.5 |
| 0.068 | 683 | 10.0 | 13.5 | 6.0 | 7.0 | 0.5 | 12.5 | 17.0 | 8.5 | 8.0 | 0.5 | 14.5 | 22.5 | 9.0 | 9.5 | 0.5 |
| 0.082 | 823 | 10.5 | 13.5 | 6.5 | 7.0 | 0.5 | 14.0 | 19.0 | 10.0 | 8.5 | 0.5 | |||||
| 0.1 | 104 | 11.5 | 13.5 | 7.0 | 7.5 | 0.5 | 15.0 | 19.0 | 10.0 | 9.0 | 0.5 | |||||
| 0.12 | 124 | 12.5 | 15.5 | 7.5 | 8.5 | 0.5 | ||||||||||
| 0.15 | 154 | 13.5 | 16.0 | 8.0 | 9.0 | 0.5 | ||||||||||
| 0.18 | 184 | 14.0 | 16.5 | 8.0 | 9.5 | 0.5 | ||||||||||
| 0.22 | 224 | 14.5 | 17.5 | 8.5 | 9.5 | 0.5 | ||||||||||
| 0.27 | 274 | 15.0 | 21.0 | 9.0 | 10.0 | 0.5 | ||||||||||
| (μF) | W.V. DC | 630VDC (2J) | 1200VDC (3B) | ||||||||
| Koade | W | H | T | P | d | W | H | T | P | d | |
| 0.001 | 102 | 6.5 | 12.5 | 4.0 | 3.5 | 0.5 | 7.0 | 13.5 | 4.5 | 4.0 | 0.5 |
| 0.0012 | 122 | 6.5 | 12.5 | 4.0 | 3.5 | 0.5 | 7.0 | 13.5 | 4.5 | 4.0 | 0.5 |
| 0.0015 | 152 | 6.5 | 12.5 | 4.0 | 3.5 | 0.5 | 7.5 | 13.5 | 4.5 | 4.5 | 0.5 |
| 0.0018 | 182 | 6.5 | 12.5 | 4.0 | 3.5 | 0.5 | 7.5 | 13.5 | 4.5 | 4.5 | 0.5 |
| 0.0022 | 222 | 7.0 | 12.5 | 4.5 | 4.5 | 0.5 | 8.0 | 14.0 | 5.0 | 5.0 | 0.5 |
| 0.0027 | 272 | 7.5 | 13.5 | 5.0 | 4.5 | 0.5 | 8.0 | 14.0 | 5.5 | 5.0 | 0.5 |
| 0.0033 | 332 | 7.5 | 13.5 | 5.0 | 4.5 | 0.5 | 9.0 | 14.0 | 6.0 | 5.5 | 0.5 |
| 0.0039 | 392 | 8.0 | 13.5 | 5.5 | 5.0 | 0.5 | 9.5 | 15.0 | 6.0 | 6.0 | 0.5 |
| 0.0047 | 472 | 8.5 | 13.5 | 5.5 | 5.0 | 0.5 | 9.5 | 16.0 | 6.0 | 6.0 | 0.5 |
| 0.0056 | 562 | 9.5 | 14.0 | 5.5 | 5.5 | 0.5 | 10.0 | 16.5 | 6.5 | 6.0 | 0.5 |
| 0.0068 | 682 | 10.0 | 14.0 | 6.0 | 6.0 | 0.5 | 10.5 | 16.5 | 6.5 | 6.5 | 0.5 |
| 0.0082 | 822 | 10.0 | 16.0 | 6.0 | 6.0 | 0.5 | 11.5 | 17.5 | 7.5 | 7.5 | 0.5 |
| 0.01 | 103 | 10.0 | 16.0 | 6.5 | 6.0 | 0.5 | 12.0 | 17.5 | 7.5 | 7.5 | 0.5 |
| 0.012 | 123 | 11.0 | 16.5 | 6.5 | 7.0 | 0.5 | |||||
| 0.015 | 153 | 11.5 | 17.0 | 7.0 | 7.5 | 0.5 | |||||
| 0.018 | 183 | 12.0 | 17.5 | 7.5 | 7.5 | 0.5 | |||||
| 0.022 | 223 | 12.5 | 18.0 | 7.5 | 8.0 | 0.5 | |||||
OPTREDEN
| Ûnderdiel | Toets Metoaden | Requirements |
|
Ferset tsjin soldering waarmte |
Solder Bath: 260°C± 5°C Immersion Tiid: 10sek ± 1 sek |
Capacitance Change ∆C/C ≤ 5% DF Feroarje ∆ tanδ ≤ 1% op 1KHz IR
≥ 50% spec wearde |
|
Ferset tsjin trilling |
Frekwinsjeberik: 10 ~ 500Hz Amplitude: 0.75m/m Duration: 6 oeren | D'r sil gjin sichtbere skea wêze Gjin intermitterend kontakt,
Gjin iepen of koartsluting |
|
Fochtige waarmte, Steady State |
Temperatuer: 55° C
Relative fochtichheid: 90% nei 95% Doer: 21 Dagen |
Capacitance Change ∆C / C ≤ 5%
DF Feroarje ∆ tanδ ≤ 1% op 1KHz IR ≥ 50% spec wearde |
|
Elektryske úthâldingsfermogen |
Temperatuer: 105° C
Voltage tapast: 1.25 x vr (DC) Doer: 1,000 oeren |
Capacitance Change ∆C/C ≤ 1% DF Feroarje ∆ tanδ ≤ 1% op 1KHz IR
≥ 50% spec wearde |
KAPASITANSJE KODE
| μF | 0.001 | 0.0047 | 0.01 | 0.047 | 0.1 | 0.27 |
| pF | 1000 | 4700 | 10000 | 47000 | 100000 | 270000 |
| Koade | 102 | 472 | 103 | 473 | 104 | 274 |
RATED VOLTAGE
| W V | 100 | 250 | 400 | 630 | 1200 |
| Koade | 2IN | 2E | 2G | 2J | 3B |
RADIAL LEAD SPACING
*Leadspace is rjochte lead net-foarme orizjinele leadspace.
| Foarsprong | pacing | 5.0mm | 7.5mm | 10mm |
| Koade | 050 | 075 | 100 | |
TAPE KODE (Lead ôfstân fan tape)
*sjoch diagram op side 4
| Lead Spacing | 5.0mm | 7.5mm | 10mm |
| Tape ferpakking | IN | IN | IN |
| Koade | RT1 | RT2 | RT3 |
LEAD LENGTE FAN SEATING PLANE
(Bulk Pack)
| mm | 5 | 10 | 15 | 20 |
| Koade | 50 | 100 | 150 | 250 |
TOLERÂNSJE
| Koade | Tolerânsje |
| J | ± 5% |
| K | ± 10% |
| M | ± 20% |
LEAD STYLE FOARLS
RADIAL TAPING CODE DIAGRAM
SPESIFIKASJES
| Beskriuwing |
Letter |
Diminsje (mm) | |||
| RT1 | RT2 | RT3 | Tol. | ||
| Lead Wire Diameter | d | 0.5 / 0.6 | 0.5 / 0.6 | 0.6 | + 0.05 |
| Tape Pitch | P | 12.7 | 12.7 | 12.7 | + 1 |
| Feed Hole Pitch | PO | 12.7 | 12.7 | 12.7 | + 0.2 |
| Centrering fan de Lead Wire | P1 | 3.85 | 2.6 / 3.75 | 7.7 | + 0.7 |
| Centering fan it lichem | P2 | 6.35 | 6.35 | 12.7 | + 1.3 |
| Lead Spacing (Pitch) | F | 5 | 7.5 | 10 | + 0.6; -0.1 |
| Component Alignment | ∆h | 0 | 0 | 0 | + 2 |
| Hichte fan Componenet út Tape Center | H | 18.5 | 18.5 | 18.5 | + 0.5 |
| Carrier Tape Breedte | W | 18 | 18 | 18 | + 1; -0.5 |
| Hâld Tape Breedte del | WÊR | 6 | 6 | 9 | Min |
| Hole Posysje | W1 | 9 | 9 | 9 | + 0.5 |
| Hâld Tape Posysje | W2 | 3 | 3 | 3 | max |
| Feed Hole Diameter | Dwaan | 4 | 4 | 4 | + 0.2 |
| Tape dikte | t | 0.7 | 0.5 | 0.5 | + 0.2 |
| Stal | fig | 1 of 2 | 1.2 of 3 | 4 | |
Opmerking: *Tastimming fan opboude pitch minder as 1mm by de som fan 20 plakken.
*Trochrinnende lege komponint minder as 3 opfolgjende stikken.
*Totaal leech op ien reel minder as 1%.
inquiry 
inquiry@sh-jinpei.com 
