Hege spanning keramyske skiif kondensator |50V ~ 10KV | CCDB
YNLIEDING
Metallisearre keramyske skiif mei ien laach mei harscoating (waaks ympregeare) ûnder 1KV of epoksy coated 1KV up.
Berik fan wearden wreidet út nei folle hegere wearden dan CBDA
FEATURES
Temperatuer berik:-55~ 125 ℃
Rate folgje:50~ 10KV
Kapasitânsje: 80pF ~ 100nF
OANFRAACH
• By-Pass & Koppeling
Frekwinsje Diskriminearjende Circuits dêr't Q en capacitance stabiliteit is net fan grut belang.
•Filterearjen, Blocking & Timing
PART NUMMER Foarbyld
ELEKTRISKE SKJAARSCHAPPEN
| Technyske data | Betingst | Spesifikaasje |
| Kapasitânsje | Metten op 1KHz
1.0 ~ 5.0 VRMS, 25° C |
80pF ~ 0.1µF |
|
Bedriuwstemperatuer |
X7R | -55° C ~ + 125 ° C |
| Y5E, Y5P | -30°C ~ +85°C | |
| Z5U, Z5V | -10°C ~ +85°C | |
| fersiljen Factor
(tan S) |
X7R, Y5E, Y5P, Z5U | < 0.025 |
| Z5V | < 0.05 | |
|
Isolaasje ferset |
Rated Voltage by 25 ° C + >°C en 70%
R.H. max |
>10GΏ of 200MΏ Farad, hokker minder is |
| Encapsulation | Standert 1KV en heger | Fenolyske wax
Epoksy Coating |
|
Solderability fan Leads |
teminsten 75% is bedekt |
Solder temperatuer
250° C + 5° C Dipping: 3+0.5 sek (Flur sil brûkt wurde) |
TEMPERATUUR COEFFICIENT CODE
| Temperatuer skaaimerken | ||
| Koade | EIACode | Skaaimerken |
| M | Z5U | +22 nei -56% +10 °C oant +85 °C |
| V | Z5V | +22 nei -82% +10 °C oant +85 °C |
| G | Y5E | +4.7% -30 °C oant +85 °C |
| P | Y5P | +10% -30 °C oant +85 °C |
| E | Y5U | +22 nei -56% -30 °C oant +85 °C |
RADIAL RJOCHT-LEAD OP TAPE (S56 LEAD CODE)
RADIAL KINK-IN OP TAPE (K56 LEAD CODE)
*Meast populêr
| Koade | Ofmjittings |
| D | 11.0 max |
| d | 0.6 ±0.05 |
| P | 12.7 ±1,0 |
| P0 | 12.7 ±0,3 |
| P1 | 3.85 ±0,7 |
| P2 | 6.35 ±1,3 |
| F | 5.0 +0.8 -0.2 |
| h | 0 ±2,0 |
| W | 18.0 +1.0 -0.5 |
| W1 | 9.0 +0.75 -0.5 |
| W2 | 3.0 max |
| H | 18.0 +3.0 -0 |
| H0 | 16.0 ± 0.5 |
| H1 | 32.25 max |
| K | 1.0 max |
| D0 | 4.0 ±0,2 |
| t | 0.7 ±0,2 |
| L | 11.0 max |
inquiry 
inquiry@sh-jinpei.com 
