Algemien Electrolytic Capacitors ▏85 ℃ 2,000 ~ 3,000Hrs ▏CAFB
85℃, 2000oere foar Dia < 8mm, 3000moatte > 10mm
Standert rige foar algemien doel
Ferfangt RC, RE & RH Series
SPESIFIKASJES
Ûnderdiel | Optreden | |||||||||||||||||||||||||||||
Bedriuwstemp. | -40°C ~ +85°C | |||||||||||||||||||||||||||||
Capacitance Tolerânsje | ± 20% (120Hz, 20° C) | |||||||||||||||||||||||||||||
leakage Aktuele (op 20°C) |
Rated Voltage | < 100V | >100V | |||||||||||||||||||||||||||
Tiid | Efter 2 minuten | Efter 5 minuten | ||||||||||||||||||||||||||||
leakage Aktuele |
I = 0.01CV of 3 (μA)
hokker grutter is |
CV < 1000
I = 0.03CV + 15(μA) |
CV > 1000
I = 0.02CV + 25(μA) |
|||||||||||||||||||||||||||
Wêr C = nominearre kapasitânsje yn F. V = nominearre DC-wurkspanning yn V. | ||||||||||||||||||||||||||||||
Rated Voltage | 6.3 | 10 | 16 | 25 | 35 | 50 | 63 | 100 | 160 | 200 | 250 | 350 | 400 | 450 | ||||||||||||||||
Dissipaasjefaktor Tanδ
op 120 Hz, 20° C |
Tan d (max) | 0.23 | 0.20 | 0.16 | 0.14 | 0.12 | 0.10 | 0.09 | 0.08 | 0.12 | 0.14 | 0.17 | 0.20 | 0.25 | 0.25 | |||||||||||||||
As de kapasiteit grutter is as 1000μF, 0.02 sil wurde tafoege foar elke 1000μF ferheging. | ||||||||||||||||||||||||||||||
Lege temperatuer Skaaimerken (op 120 Hz) |
Impedânsjeferhâlding sil de wearden net boppe de wearden jûn yn 'e tabel hjirûnder. | |||||||||||||||||||||||||||||
Rated Voltage | 6.3 | 10 | 16 | 25 | 35 | 50 | 63 | 100 | 160 | 200 | 250 | 350 | 400 | 550 | ||||||||||||||||
Impedânsje radio |
MEI(-25° C) | φD<16 | 6 | 4 | 3 | 3 | 2 | 2 | 2 | 2 |
3 |
6 |
8 |
12 |
14 |
16 |
||||||||||||||
/MEI(+20° C) | φD>16 | 8 | 6 | 4 | 4 | 3 | 3 | 3 | 3 | |||||||||||||||||||||
MEI(-40° C) | φD<16 | 10 | 8 | 6 | 6 | 4 | 3 | 3 | 3 | 4 | 8 | 10 | 10 | 10 | 10 | |||||||||||||||
/MEI(+20° C) | φD>16 | 18 | 16 | 12 | 10 | 8 | 8 | 6 | 6 | |||||||||||||||||||||
Load Life test by 20 ° C (na rated spanning is tapast op 85 ° C foar 2000 |
Testtiid | 2000hrs(3000hrs foar φ D > 10mm) |
Shelf Life by 20 ° C nei bleatstelling oan 85 foar 1000 oeren mei |
Testtiid | 1000hrs | |||||||||||||||||||||||||
Capacitance Change | Binnen < ± 20% fan begjinwearde | Capacitance Change | Binnen < ± 20% fan begjinwearde | |||||||||||||||||||||||||||
fersiljen Factor | minder as 200% fan spesifike wearde | fersiljen Factor | minder as 200% fan spesifike wearde | |||||||||||||||||||||||||||
/ 3000 oeren) | leakage Aktuele | Binnen oantsjutte wearde | gjin spanning | leakage Aktuele | Binnen oantsjutte wearde | |||||||||||||||||||||||||
Ripple Strom & Frekwinsje Multipliers |
Freq. (Hz)
Hoed. (μF) |
60
(50) |
120 |
500 |
1K |
10K
op |
||||||||||||||||||||||||
Ûnder 100 | 0.70 | 1.00 | 1.30 | 1.40 | 1.50 | |||||||||||||||||||||||||
100 nei 1000 | 0.75 | 1.00 | 1.20 | 1.30 | 1.35 | |||||||||||||||||||||||||
1000 en boppe | 0.80 | 1.00 | 1.10 | 1.12 | 1.15 | |||||||||||||||||||||||||
Ripple Strom & Temperatuer Multipliers | Temperatuer (° C) | Ûnder 50 | 70 | 85 | ||||||||||||||||||||||||||
Mutipliers | 1.78 | 1.4 | 1.00 | |||||||||||||||||||||||||||
Standerts | Voldoet oan karakteristyk W fan JIS C 5141 |
DIMINSJE & TASTE RIPPLE CURRENT
Ripple Strom :mA/rms by 120Hz, 85° C
V.DC
µ F Koade |
6.3V (OJ) | 10V (1IN) | 16V (1C) | 25V (1E) | 35V (1V) | 50V (1H) | 63V (1J) | 100V (2IN) | |||||||||
ΦD x L | mA | ΦD xL | mA | ΦD x L | mA | ΦD x L | mA | ΦD x L | mA | ΦD x L | mA | ΦD x L | mA | ΦD x L | mA | ||
0.1 | 0R1 | 5 x 11 | 1.5 | 5 x 11 | 3 | 5 x 11 | 3 | ||||||||||
0.2 | R22 | 5 x 11 | 3.5 | 5 x 11 | 5 | 5 x 11 | 5.8 | ||||||||||
0.3 | R33 | 5 x 11 | 5 | 5 x 11 | 8 | 5 x 11 | 8.8 | ||||||||||
0.5 | R47 | 5 x 11 | 7 | 5 x 11 | 10 | 5 x 11 | 12 | ||||||||||
1.0 | 10 | 5 x 11 | 15 | 5 x 11 | 17 | 5 x 11 | 22 | ||||||||||
2.2 | 2R2 | 5 x 11 | 29 | 5 x 11 | 28 | 5 x 11 | 33 | ||||||||||
3.3 | 3R3 | 5 x 11 | 35 | 5 x 11 | 34 | 5 x 11 | 40 | ||||||||||
4.7 | 4R7 | 5 x 11 | 31 | 5 x 11 | 40 | 5 x 11 | 42 | 5 x 11 | 45 | 5 x 11 | 48 | ||||||
10 | 100 | 5 x 11 | 49 | 5 x 11 | 54 | 5 x 11 | 58 | 5 x 11 | 65 | 5 x 11 | 70 | 5 x 11
6.3 x 11 |
59
80 |
||||
22 | 220 | 5 x 11 | 70 | 5 x 11 | 75 | 5 x 11 | 80 | 5 x 11 | 87 | 5 x 11 | 95 | 6.3 x 11 | 115 | 6.3 x 11
8 x 11.5 |
115
135 |
||
33 | 330 | 5 x 11 | 72 | 5 x 11 | 84 | 5 x 11 | 90 | 5 x 11 | 97 | 5 x 11
6.3 x 11 |
108
115 |
5 x 11
6.3 x 11 |
136
163 |
6.3 x 11
8 x 11.5 |
140
340 |
8 x 11.5
10 x 16 |
145
195 |
47 | 470 | 5 x 11 | 90 | 5 x 11 | 100 | 5 x 11 | 110 | 5 x 11 | 115 | 5 x 11
6.3 x 11 |
130
145 |
6.3 x 11 | 165 | 6.3 x 11
8 x 11.5 |
170
397 |
10 x 13
10 x 16 |
235
255 |
DIMINSJE & TASTE RIPPLE CURRENT
Ripple Strom :mA/rms by 120Hz, 85° C
* = Flat (non-vented) rubberen boel.
Oare ienheden wurde makke mei ferhege (útlaat) rubberen boel
PART NUMMER Foarbyld
CAFB 471 M 1C BK 100 125
LEAD SPACING EN DIAMETER
φD | 5 | 6.3 | 8 | 10 | 13 | 16 | 18 | 22 | 25 |
P | 2.0 | 2.5 | 3.5 | 5.0 | 5.0 | 7.5 | 7.5 | 10 | 12.5 |
φd | 0.5 | 0.6 | 0.8 | 1.0 | |||||
in | 1.0 | 1.5 | 2.0 | ||||||
b | 0.5 |
HOE MEITSJE IN DIEL NÛMER
- Searje:CAFB
- Kapasitânsje: Rated capacitance yn µF wurdt fertsjintwurdige troch in trije-sifers nûmer. De earste twa sifers binne de signifikante sifers fan 'e nominale kapasitânsje en it tredde sifer jout it oantal nullen oan dy't folgje.. Ferwize asjebleaft nei it folgjende foarbyld.
μF 0.1 0.47 1 4.7 10 47 100 470 1000 4700 10000 Dielnûmer 0R1 R47 010 4R7 100 470 101 471 102 472 103 - Tolerânsje: (20% ISTypysk)
Koade K M T W Tolerânsje + 10% + 20% + 50% /-10% + 100% /-10% - Rated Voltage: Voltage yn volts (V) wurdt fertsjintwurdige troch in twa-sifers koade mei de nominearre wurkspanning oanjûn as folget:
foltaazje (WV) 6.3 10 16 25 35 40 50 63 80 100 160 200 250 350 400 450 Koade 0J 1IN 1C 1E 1V 1G 1H 1J 1K 2IN 2C 2D 2E 2V 2G 2W - Lead foarmjen &Pakket
Koade Lead Beskriuwing Ferpakking BC Bending Cut Bulk ferpakking BK Rjochte lead Bulk ferpakking CC Lead Cutting Bulk ferpakking FC Lead foarmjen & Cutting Bulk ferpakking FF Lead foarmjen Bulk ferpakking SC Snap-in & Cutting Bulk ferpakking SD Cathode Lead Beading Bulk ferpakking SF Snap-in, Formearje & Cutting Bulk ferpakking NEI Rjochte lead Tape & Munysje TA Lead foarmjen Tape & Munysje SR Rjochte lead Tape & Reel TR Lead foarmjen Tape & Reel
- CanSize
Diameter (mm)x10 & Lingte (mm)x10. Kin Grutte 063110, fertsjintwurdiget 6,3 mm diameter troch 11 mm lingte.
- Wire and SleeveType*
= (Oerlitte) Lead (Pb) Fergees Wire & PVC sleeve
`P = Lead (Pb) Fergees Wire & PET Sleeve
*Noat: Alle standert RFE-aluminium elektrolytyske kondensatoren binne lead (Pb) fergees en RoHS-kompatibel. PET-sleeve is beskikber foar dy bedriuwen
dat ek nedich PVC frij produkt.
LEIDEN TAPING & PACKAGING SPESIFIKASJES
Taping Spesifikaasje foar Radial Lead Type
Packing | TA,TR (Fig. 1) | NEI, SR (Fig. 2, 3, 4) | ||||||||||||||||||
L | L ≤ 7 mm | L ≥ 7 mm | L ≤ 7 mm | L ≥ 7 mm | ||||||||||||||||
fD
Symboal |
f 3 |
f 4 |
f 5 |
f6.3 |
f 8 |
f 5 |
f 6.3 |
f 8 |
f 3 |
f 4 |
f 5 |
f 6.3 |
f 8 |
f 5 |
f 6.3 |
f 8 |
Tol. |
f 10 |
f 13 |
Tol. |
fd | 0.4 | 0.45 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.6 | 0.4 | 0.45 | 0.45 | 0.45 | 0.45 | 0.5 | 0.5 | 0.6 | ± 0.05 | 0.6 | 0.6 | ± 0.05 |
F | 5.0 | 5.0 | 5.0 | 5.0 | 5.0 | 5.0 | 5.0 | 5.0 | 2.5 | 2.5 | 2.5 | 2.5 | 3.5 | 2.5 | 2.5 | 3.5 | -0.2/+0.8 | 5.0 | 5.0 | -0.2/+0.8 |
P | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | ± 1.0 | 12.7 | 25.4 | ± 1.0 |
P0 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | ± 0.2 | 12.7 | 12.7 | ± 0.30 |
P2 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | ± 1.0 | 6.35 | 6.35 | ± 1.3 |
P1 | 3.85 | 3.85 | 3.85 | 3.85 | 3.85 | 3.85 | 3.85 | 3.85 | 5.1 | 5.1 | 5.1 | 5.1 | 4.6 | 5.1 | 5.1 | 4.6 | ± 0.5 | 3.85 | 3.85 | ± 0.7 |
H | 17.5 | 17.5 | 17.5 | 17.5 | 17.5 | 18.5 | 18.5 | 20.0 | 17.5 | 17.5 | 17.5 | 17.5 | 17.5 | 18.5 | 18.5 | 18.5 | ± 0.75 | 18.5 | 18.5 | ± 0.75 |
H0 | 16.0 | 16.0 | 16.0 | 16.0 | 16.0 | 16.0 | 16.0 | 16.0 | — | — | — | — | — | — | — | — | ± 0.5 | — | — | ± 0.5 |
W | 18.0 | 18.0 | 18.0 | 18.0 | 18.0 | 18.0 | 18.0 | 18.0 | 18.0 | 18.0 | 18.0 | 18.0 | 18.0 | 18.0 | 18.0 | 18.0 | ± 0.5 | 18.0 | 18.0 | ± 0.5 |
W0 | 12.0 | 12.0 | 12.0 | 12.0 | 12.0 | 12.0 | 12.0 | 12.0 | 12.0 | 12.0 | 12.0 | 12.0 | 12.0 | 12.0 | 12.0 | 12.0 | Min | 12.0 | 12.0 | Min. |
W1 | 9.0 | 9.0 | 9.0 | 9.0 | 9.0 | 9.0 | 9.0 | 9.0 | 9.0 | 9.0 | 9.0 | 9.0 | 9.0 | 9.0 | 9.0 | 9.0 | ± 0.5 | 9.0 | 9.0 | ± 0.5 |
W2 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | max. | 1.5 | 1.5 | max. |
f d0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | ± 0.2 | 4.0 | 4.0 | ± 0.2 |
t | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | ± 0.2 | 0.7 | 0.7 | ± 0.2 |
H | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | ± 1.0 | 0 | 0 | ± 1.0 |
l | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | max. | 1.0 | 1.0 | max. |
IN | 11 | 11 | 11 | 11 | 11 | 11 | 11 | 11 | 11 | 11 | 11 | 11 | 11 | 11 | 11 | 11 | max. | 11 | 11 | max. |
Fig. Nee. | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 2 | 2 | 2 | 3 | 3 | 2 | 3 | 3 | 3 | 3,4 |
Packaging Quantity
D | 3 | 4 | 5 | 6.3 | 8 | 10 | 13 |
TA, NEI | 3000 | 2000 | 2000 | 2000 | 1000 | 500 | 250 |
TR,SR | 3000 | 1500 | 1200 | 1000 | 800 | 500 | 500 |
OPMERKINGEN:
- De boppesteande hoemannichten binne typysk. Hoefollen kinne
- De komponint sil wurde rjochte op de tape sadat de positive lead is liedend of de negative lead is liedend, ôfhinklik fan de klant syn fersyk
FEATURES
◆ 2000 oeren(3000hrs foar φ D > 10mm) assured
◆ SlimType
◆ Rohs-kompatibel