Lege spanning krêftkondiging |0.23~ 0.45kvac | Cjcc
Algemiene beskriuwing:
JINPEI-merk fan self-healing type leechspanningskondensator makke fan 'e avansearre metalisearre film, wurdt produsearre strikt yn oerienstimming mei de Nation Standert en IEC standert troch hy yntrodusearre avansearre bûtenlânske techniken en apparatuer. The device is suitable for
low voltage power network to improve power factor, reduce reactive loss and better the voltage quality.
Skaaimerken
1.Lyts folume, light weight and convenient installation
2.No oil leakage, no-toxic and environment protection
3.Leech ferlies, little radiation and low temperature rise
4.Excellent self-healing performance
5.Feilichheid
Working condition
1.Hichte: minder as 2000m
2.Ambient temperatuer: -25~50℃degree
3.Feuchte: lytser as 85%
4.Nei de macht cut off, reputaasje doe't soargje derfoar dat de bliuwe spanning is lytser as 10% fan de nominearre spanning, usually this time is 200s, so the controller you use should has the function of time delay for reputing after cut off.o shunt off.
Technical data
1.Rated voltage: 230Vac, 400Vac, 450VAC 3.Rated output: 1-60 KVAR
2.Rated frekwinsje: 50Hz or 60Hz
3.Capacitance Tolerânsje: -5% – +10%
4.Tangent fan it ferlies hoeke: With the power frequency rated voltage,
5.Standert spanning: Tusken terminal 2.15 kear rated spanning foar 5 sekonden, between terminals and container 2 Un+2Kv or 3KVAC choose the higher one for 10 sekonden.
6.Max permissible over-voltage: 110% rated spanning
7.Maksimum tastiene oerstreaming: 130% rated hjoeddeistige
8.Self-discharge feature: Less than 50V in 3min after power broke down when the DC is√2 Un as before increased by the capacitors.
9.Applicable standard: GB/T 12747-2004, IEC60831-2002.
PART NUMPER EXAMPLE
| Cjcc | Rated Voltage(kV) | Rated Output (links) | Rated Capacitor(uF) | Rated Aktueel(IN) | H
(mm) |
Output Terminal | Shell Type |
| 0.23-1-1 | 0.23 | 1 | 60.2 | 4.3 | 125 | M6 | A2 | |
| 0.23-3-1 | 0.23 | 3 | 180.5 | 13 | 125 | M6 | A2 | |
| 0.23-5-1 | 0.23 | 5 | 301 | 21.7 | 125 | M6 | A2 | |
| 0.23-7.5-1 | 0.23 | 7.5 | 451.5 | 32.6 | 210 | M8 | A2 | |
| 0.23-10-1 | 0.23 | 10 | 602 | 43.5 | 210 | M8 | A2 | |
| 0.23-15-1 | 0.23 | 15 | 903 | 65.2 | 210 | M8 | B2 | |
| 0.23-20-1 | 0.23 | 20 | 1203.4 | 87 | 260 | M8 | B2 | |
| 0.23-25-1 | 0.23 | 25 | 1504.3 | 108.7 | 330 | M10 | B2 | |
| 0.23-30-1 | 0.23 | 30 | 1805.2 | 130.4 | 230 | 2*M10 | C | |
| 0.4-4-1 | 0.4 | 4 | 79.6 | 10 | 125 | M6 | A2 | |
| 0.4-5-1 | 0.4 | 5 | 99.5 | 12.5 | 125 | M6 | A2 | |
| 0.4-6-1 | 0.4 | 6 | 119.4 | 15.0 | 125 | M6 | A2 | |
| 0.4-7.5-1 | 0.4 | 7.5 | 149.2 | 18.8 | 125 | M6 | A2 | |
| 0.4-8-1 | 0.4 | 8 | 159.2 | 20.0 | 125 | M6 | A2 | |
| 0.4-10-1 | 0.4 | 10 | 198.9 | 25 | 180 | M6 | A2 | |
| 0.4-12-1 | 0.4 | 12 | 238.7 | 30 | 180 | M6 | A2 | |
| 0.4-14-1 | 0.4 | 14 | 278.5 | 35 | 210 | M6 | A2 | |
|
Page3-5 |
| 0.4-15-1 | 0.4 | 15 | 298.4 | 37.5 | 210 | M6 | A2 | |
| 0.4-16-1 | 0.4 | 16 | 318.3 | 40 | 210 | M6 | A2 | |
| 0.4-18-1 | 0.4 | 18 | 358.1 | 45.0 | 210 | M8 | B2 | |
| 0.4-20-1 | 0.4 | 20 | 397.9 | 50 | 210 | M8 | B2 | |
| 0.4-22-1 | 0.4 | 22 | 437.7 | 55 | 210 | M8 | B2 | |
| 0.4-25-1 | 0.4 | 24 | 497.4 | 62.5 | 210 | M8 | B2 | |
| 0.4-30-1 | 0.4 | 30 | 596.8 | 75 | 260 | M8 | B2 | |
| 0.4-35-1 | 0.4 | 35 | 696.3 | 87.5 | 330 | M8 | B2 | |
| 0.4-40-1 | 0.4 | 40 | 796.2 | 100 | 330 | M8 | B2 | |
| 0.4-45-1 | 0.4 | 45 | 895.2 | 112.5 | 230 | 2*M10 | C | |
| 0.4-50-1 | 0.4 | 50 | 995.2 | 125 | 230 | 2*M10 | C | |
| 0.4-60-1 | 0.4 | 60 | 1194.3 | 150 | 280 | 2*M10 | C | |
| 0.45-4-1 | 0.45 | 4 | 62.9 | 8.9 | 125 | M6 | A2 | |
| 0.45-5-1 | 0.45 | 5 | 78.6 | 11.1 | 125 | M6 | A2 | |
| 0.45-6-1 | 0.45 | 6 | 94.3 | 13.3 | 125 | M6 | A2 | |
| 0.45-7.5-1 | 0.45 | 7.5 | 117.9 | 16.7 | 125 | M6 | A2 | |
| 0.45-8-1 | 0.45 | 8 | 125.8 | 17.8 | 125 | M6 | A2 | |
|
Page4-5 |
| 0.45-10-1 | 0.45 | 10 | 157.2 | 22.2 | 180 | M6 | A2 |
| 0.45-12-1 | 0.45 | 12 | 188.6 | 26.7 | 180 | M6 | A2 |
| 0.45-14-1 | 0.45 | 14 | 220.1 | 31.1 | 210 | M8 | A2 |
| 0.45-15-1 | 0.45 | 15 | 235.8 | 33.3 | 210 | M8 | A2 |
| 0.45-16-1 | 0.45 | 16 | 251.5 | 35.6 | 210 | M8 | A2 |
| 0.45-18-1 | 0.45 | 18 | 282.9 | 40 | 210 | M8 | A2/B2 |
| 0.45-20-1 | 0.45 | 20 | 314.4 | 44.4 | 210 | M8 | A2/B2 |
| 0.45-22-1 | 0.45 | 22 | 345.8 | 48.9 | 210 | M8 | B2 |
| 0.45-25-1 | 0.45 | 25 | 393.2 | 55.6 | 210 | M8 | B2 |
| 0.45-30-1 | 0.45 | 30 | 471.8 | 66.7 | 210 | M8 | B2 |
| 0.45-35-1 | 0.45 | 35 | 550.2 | 77.8 | 260 | M8 | B2 |
| 0.45-40-1 | 0.45 | 40 | 629.1 | 88.9 | 260 | M8 | B2 |
| 0.45-45-1 | 0.45 | 45 | 707.4 | 100 | 230 | M10 | C |
| 0.45-50-1 | 0.45 | 50 | 786.3 | 111.1 | 230 | 2* M10 | C |
| 0.45-60-1 | 0.45 | 60 | 943.6 | 133.3 | 230 | 2*M10 | C |
YNLIEDING
JINPEI-merk fan self-healing type leechspanningskondensator makke fan 'e avansearre metalisearre film, wurdt produsearre strikt yn oerienstimming mei de Nation Standert en IEC standert troch hy yntrodusearre avansearre bûtenlânske techniken en apparatuer. The device is suitable for
low voltage power network to improve power factor, reduce reactive loss and better the voltage quality.
