Low Voltage Power Capacitor |0.23~ 1.2KVAC | CJCA
Algemiene beskriuwing:
JINPEI-merk fan selsgenezend type leechspanningskondensator makke fan 'e avansearre metalisearre film, wurdt strang produsearre yn oerienstimming mei de Nation Standard en IEC standert troch de yntrodusearre avansearre bûtenlânske techniken en apparatuer.
It apparaat is geskikt foar leechspanningsnetwurk om de krêftfaktor te ferbetterjen, ferminderje reaktyf ferlies en better de spanning kwaliteit.
Skaaimerken
1.Lyts folume, licht gewicht en handige ynstallaasje
2.Gjin oalje lekkage, net-giftige en miljeubeskerming
3.Leech ferlies, bytsje strieling en lege temperatuer stiging
4.Excellent sels-healing prestaasjes
5.Feilichheid
Working condition
1.Hichte: leger dan 2000m
2.Omjouwingstemperatuer: -25~ 50 ℃ graad
3.Feuchte: lytser as 85%
4.Nei de macht cut off, repetearje wannear't jo derfoar soargje dat de spanning bliuwt lytser is as 10% fan de nominale spanning, dizze tiid is normaal 200s, sadat de controller dy't jo brûke de funksje hawwe moat fan tiidfertraging foar reputaasje nei ôfkoarting.
Technyske data
1.Rated spanning: 230VAC, 400VAC, 525VAC, 690VAC, 750VAC, 1050VAC, 1200VAC
2.Rated útfier: 1-60 LINKS
3.Rated frekwinsje: 50Hz as 60Hz
4.Capacitance Tolerânsje: -5% – +10%
5.Tangent fan it ferlies hoeke: Mei de macht frekwinsje rated spanning,
6.Standert spanning: Tusken terminal 2.15 kear wurdearre spanning foar 5 sekonden, tusken terminals en container 2 Un + 2Kv of 3KVAC kies de hegere foar 10 sekonden.
7.Maksimum tastiene oerspanning: 110% nominale spanning
8.Maksimum tastiene oerstreaming: 130% rated hjoeddeistige
9.Self-discharge funksje: Minder dan 50V yn 3min nei't macht ôfbrutsen as de DC is √2 Un lykas earder ferhege troch de kondensators. 11.Tapasbere standert: GB/T 12747-2004, IEC 60831-2002.
PART NUMPER Foarbyld
SEPERATE PHASE POWER CAPACITOR
| foltaazje(kV) | Utfier (links) | Capacitor(UF) | Aktueel(IN) | (mm) | terminal | Type | |
| 0.4-1-3 | 0.4 | 1 | 19.9 | 1.4 | 105 | M6 | A1 |
| 0.4-2-3 | 0.4 | 2 | 39.8 | 2.9 | 105 | M6 | A1 |
| 0.4-3-3 | 0.4 | 3 | 59.7 | 4.3 | 125 | M6 | A2 |
| 0.4-4-3 | 0.4 | 4 | 79.6 | 5.8 | 125 | M6 | A2 |
| 0.4-5-3 | 0.4 | 5 | 99.5 | 7.2 | 125 | M6 | A2 |
| 0.4-6-3 | 0.4 | 6 | 119.4 | 8.7 | 125 | M6 | A2 |
| 0.4-7.5-3 | 0.4 | 7.5 | 149.2 | 10.8 | 125 | M6 | A2 |
| 0.4-8-3 | 0.4 | 8 | 159.2 | 11.6 | 125 | M6 | A2 |
| 0.4-10-3 | 0.4 | 10 | 198.9 | 14.4 | 180 | M6 | A2 |
| 0.4-12-3 | 0.4 | 12 | 238.7 | 17.3 | 180 | M6 | A2 |
| 0.4-14-3 | 0.4 | 14 | 278.5 | 20.2 | 210 | M6 | A2 |
| 0.4-15-3 | 0.4 | 15 | 298.4 | 21.7 | 210 | M6 | A2 |
| 0.4-16-3 | 0.4 | 16 | 318.3 | 23.1 | 210 | M6 | A2 |
| 0.4-18-3 | 0.4 | 18 | 358.1 | 26.0 | 245/210 | M6 | A2/B2 |
| 0.4-20-3 | 0.4 | 20 | 397.9 | 28.9 | 245/210 | M6 | A2/B2 |
| 0.4-22-3 | 0.4 | 22 | 437.7 | 31.8 | 210 | M8 | B2 |
| 0.4-24-3 | 0.4 | 24 | 477.5 | 34.6 | 210 | M8 | B2 |
| 0.4-25-3 | 0.4 | 25 | 497.4 | 36.1 | 210 | M8 | B2 |
| 0.4-28-3 | 0.4 | 28 | 557.3 | 40.4 | 260 | M8 | B2 |
| 0.4-30-3 | 0.4 | 30 | 596.8 | 43.3 | 260 | M8 | B2 |
| 0.4-35-3 | 0.4 | 35 | 696.3 | 50.5 | 260 | M8 | B2 |
| 0.4-40-3 | 0.4 | 40 | 796.2 | 57.7 | 320 | M8 | B2 |
| 0.4-45-3 | 0.4 | 45 | 895.2 | 65.0 | 210 | M10 | C |
| 0.4-50-3 | 0.4 | 50 | 995.2 | 72.2 | 210 | M10 | C |
| 0.4-55-3 | 0.4 | 55 | 1094.2 | 79.4 | 260 | M10 | C |
| 0.4-60-3 | 0.4 | 60 | 1194.3 | 86.6 | 260 | M10 | C |
| 0.45-1-3 | 0.45 | 1 | 15.7 | 1.3 | 105 | M6 | A1 |
| 0.45-2-3 | 0.45 | 2 | 31.4 | 2.6 | 105 | M6 | A1 |
| 0.45-3-3 | 0.45 | 3 | 47.2 | 3.8 | 125 | M6 | A2 |
| 0.45-4-3 | 0.45 | 4 | 62.9 | 5.1 | 125 | M6 | A2 |
| 0.45-5-3 | 0.45 | 5 | 78.6 | 6.4 | 125 | M6 | A2 |
| 0.45-6-3 | 0.45 | 6 | 94.3 | 7.7 | 125 | M6 | A2 |
| 0.45-7.5-3 | 0.45 | 7.5 | 117.9 | 9.6 | 125 | M6 | A2 |
| 0.45-8-3 | 0.45 | 8 | 125.8 | 10.3 | 125 | M6 | A2 |
| 0.45-10-3 | 0.45 | 10 | 157.2 | 12.8 | 180 | M6 | A2 |
| 0.45-12-3 | 0.45 | 12 | 188.6 | 15.4 | 180 | M6 | A2 |
inquiry 
inquiry@sh-jinpei.com 
