Fast Charge Solution 1000Wh Under -30℃
※1000Wh of backup power available at -30° C.
※Maximum discharge current 10A,
※Charging current is about 5A.
※Voltage of the pack 26V
※Upper Limit around 50-55V
- Product characteristics
It is composed of CKAA21700 cylindrical full pole ear fast charging lithium ion battery, with strong current carrying capacity and good safety.
Wide working environment temperature range: 050M020-1 conventional battery pack consists of wide temperature
CKAA21700H battery, suitable for application at the working environment temperature of-20~55℃.
High low temperature working environment capacity retention rate: 050M020-2 low temperature battery pack consists of low temperature CKAA21700L battery, suitable for application at the working environment temperature of-40~45℃, and the discharge capacity retention rate of-30℃ is 88%.
Lange syklus libben: low temperature type up to 5000 kear, conventional type up to 6000 kear, to reduce the operation and maintenance cost for end customers.
Fast charging: 80A charging can charge by 90% yn 15 minuten, greatly reducing the charging time, increasing the effective working time of the equipment, and reducing the investment of the project equipment.
Support high power drive: the maximum discharge current up to 50A, can output power of 1850W. Compact flat structure design, height minimum up to 80mm.
Application fields: mobile robot, automatic transportation system, etc.
2. Main technical parameters
| order number | Technical specification name |
betingst |
ienheid |
Specification value | |
| 050M020-1X | 050M020-2X | ||||
|
1 |
Energy storage capacity@BOL |
RT charge and release – 20℃ charge and discharge-30℃ charge and discharge RT, – 20℃ RT, and-30℃ |
Ah |
≥ 20@1C | ≥ 20@1C |
| 2 | nominal voltage | V | 50.4 | ||
| 3 | Battery pack charging off | V | 58.8 | ||
|
4 |
Battery pack
discharge cut-off voltage |
V |
37.06 |
||
|
5 |
Maksimum
charging current pour 1 |
From overdischarge
protection to overcharge protection |
IN |
80 |
|
|
6 |
Maksimum
discharge current pour 1 |
IN |
50 |
||
|
7 |
rated hjoeddeistige |
Continuous charge and discharge for 8 oeren, the battery temperature
rise ≤ 10℃ |
IN |
20 |
|
| order number | Technical specification name | betingst | ienheid | Specification value | |
| 050M020-1X | 050M020-2X | ||||
|
8 |
cycle life |
RT, 80A charging, 50A discharge, DOD 90%, capacity decay rate of 20% |
bestelle |
6000 |
5000 |
|
9 |
life length |
The annual average working
environment temperature is 30℃, and the capacity decay rate is 20% |
year |
8 |
|
| 10 | Main circuit to ground voltage | RT | DC1.5kV@1min,≤ 1mA | ||
| 11 | BMS function | Single cell voltage, battery total voltage, battery total current, battery
temperatuer, switch temperature real-time collection, SOC, SOH monitoring, single cell voltage balance, fault diagnosis. |
|||
| 12 | defencive function | Over charge, over discharge, over current, short circuit, over temperature and low temperature | |||
|
13 |
Charge and discharge control |
After undervoltage protection, in the non-charging working state, BMS will force the delay into hibernation and turn off the charge and discharge protection switch;
Charging automatically activates the BMS and turns on the charge and discharge protection switch; RS485 The communication signal activates the BMS and turns on the charge and discharge protection switch; RS485 When the communication signal is interrupted, turn off the charge and discharge protection switch, and the BMS delay into hibernation. |
|||
| 14 | The monomer voltage resolution | mV | 1 | ||
| 15 | Single voltage accuracy | RT | ±0.2% or ±5mV | ||
|
16 |
Charge and
discharge current resolution |
IN |
0.01 |
||
|
17 |
Charge and
discharge current accuracy |
RT |
±0.5% or ±0.05A |
||
|
18 |
Batterij
temperature resolution |
℃ |
0.1 |
||
|
19 |
Batterij
temperature accuracy |
>-10℃ |
℃ |
±2 |
|
| 20 | SOC resolution ratio | 0.1% | |||
| 21 | SOC precision | RT | ± 5% | ||
|
22 |
Single-body voltage balancing
capability |
||||
|
23 |
The monomer voltage
equilibrium deviation |
The average monomer voltage at3.6~3.9V |
mV |
±15 |
|
| order number | Technical specification name |
betingst |
ienheid |
Specification value | |
| 050M020-1X | 050M020-2X | ||||
|
24 |
Kommunikaasje
interface and protocol |
RS485, “Lithium iron battery single communication Protocol V2.5”
and customer communication protocol, lykas “Lithium BMS board and upper computer communication protocol Rev 0” |
|||
|
25 |
Battery operating temperature range |
℃ |
-20~65 |
-40~55 |
|
|
26 |
Product working environment temperature berik |
During the charge- discharge cycle cycle, the root mean square current is not greater
than the rated current |
℃ |
-20~55 |
-40~45 |
| 27 | Product protection level | Not less than IP54 | |||
|
28 |
Humidity range of the product working environment |
%R.H . |
≤ 90 |
||
| 29 | above sea level | m | ≤ 3000 | ||
| 30 | External size | See product shape chart | |||
| 31 | gewicht | kg | 12.5±1 | ||
|
32 |
memory time |
RT, SOC 50% |
day |
365 |
|
Noat 1: The maximum charging current and maximum discharge current of each type of products are also limited by the carrying capacity of the charging and discharge interface. The maximum charging current and maximum discharge current of the products using Anderson SG- 50A600V interface are 50A.
Lês mear
