Radial lead lithium ion capacitor LIC 1300F
Tụ điện Lithium-ion (LIC) là một loại tụ điện lai. Jinpei đã nâng cao R&Khả năng D trên các tụ điện lithium-ion., Jinpei đã hoàn thành R&D của 3.8V 20F-750F CKBA 、4.2V 80F-1300F CKBB series, 4.2V 100mah-4200mah cylinder CKAA Series monomer lithium-ion capacitors and ultra-fast battery module.
Lithium-ion capacitor is a hybrid capacitor, Jinpei gets an unique cutting- edge technology in the field. | ||||||||||||||||||||||||
It has a larger energy density than supercapacitors and a smaller volume; Compared with lithium-ion batteries, the power density is large, the charging speed is faster, the temperature range is | ||||||||||||||||||||||||
wide, and the life is longer. |
Loạt 型号系列 |
ΦD (mm) |
L (mm) |
L1 (mm) |
L2 (mm) |
Φd (mm) | P (mm) |
Cân nặng 重量(g) |
||||||
CKBB1840 | 18+1.5 Max |
40±1.5 | 27.5± 1,0 | 25.0+1.0 | 0.8±0.1 | 7.5± 0,5 | ≤22.0 | ||||||
Product Technical Index 产品技术指标 | |||||||||||||
Loạt 序号 |
Bằng khen 特性 |
Thông số kỹ thuật 规格 |
Ghi chú 备注 |
||||||||||
1 | Nhiệt độ làm việc 工作温度 |
-40℃ ~ 65 ℃ | |||||||||||
2 | Điện áp làm việc 推荐工作电压区间 |
2.5~4.0V | |||||||||||
3 | Min Voltage 最低电压 |
2.5V | |||||||||||
4 | Surge voltage 浪涌电压 |
4.2V | |||||||||||
5 | 1C Test current 1C 测试电流 |
650mA | |||||||||||
6 | Công suất định mức 额定容量(@25±3℃) |
650mAh/1300F | 4.2V-2.5V | ||||||||||
550mAh | 4.0V-2.5V | ||||||||||||
Lòng khoan dung 电容公差 |
-20%~ + 20% | ||||||||||||
7 | Equivalent capacity 等效容量 |
650.0mAh | |||||||||||
8 | DCR 直流内阻 |
≤90mΩ | 4.2V@25±3℃, 10msec | ||||||||||
9 | ACR 交流内阻 |
≤35mΩ | 1kHz, 3.6V | ||||||||||
10 | Max discharge current 最大放 电电流 |
Tiếp diễn 连续放电 |
6.0Một | ||||||||||
Xung (1giây) 3.8V 脉冲 |
20.0Một | ||||||||||||
11 | Max charge current 最大充电电流 |
6.0Một | |||||||||||
12 | Cycling performance 循环寿命 |
≥8000 次 | |||||||||||
13 | Khối lượng (g) 标准重量 |
≤22.0 | |||||||||||
14 | Điều kiện lưu trữ tối ưu 最佳存储环境 |
+10C~50℃ 60%RH 或以下 |
|||||||||||
Technical Information 性能特性 | |||||||||||||
Loạt 序号 |
Dự án 项目 |
Properties 性能 |
|||||||||||
Điện dung (-20℃): ≥ 70% of initial measured value | |||||||||||||
电容(-20℃): ≥初始测量值的 70% | |||||||||||||
High-low | Internal resistance (-20℃): ≤10 times the initial specified value | ||||||||||||
1 | nhiệt độ properties |
内阻(-20℃): ≤初始规定值的 10 倍 Điện dung (+65℃): ≥ 70% of initial measured value |
|||||||||||
高低温特性 | 电容(+65℃): ≥初始测量值的 70% | ||||||||||||
Internal resistance (+65℃): ≤2 times the initial specified value | |||||||||||||
内阻(+65℃): ≤初始规定值的 2 倍 | |||||||||||||
Nhiệt độ cao | Điện dung: ≥ 70% of initial measured value | ||||||||||||
2 | and high humility storage properties |
电容: ≥初始测量值的 70% Internal resistance: ≤2 times the initial specified value |
|||||||||||
高温高湿存储特性 | 内阻: ≤初始规定值的 2 倍 | ||||||||||||
3 | Charge/discharge cycling properties 充电/放电循环特性 | Điện dung: ≥ 70% of initial measured value 电容: ≥初始测量值的 70% Internal resistance: ≤4 times the initial specified value 内阻: ≤初始规定值的 4 倍 |
ĐẶC TRƯNG
CKBA
◆ VẬN HÀNH: -40℃ ĐẾN + 70℃
◆ QUYỀN VỐN: 20F,40F,30F,80F,120F,70F,120F,250F,500F,750F
◆ NĂNG LỰC NĂNG LỰC: -20%~ + 80%
◆ RATEDVOLTAGE: 2.5V-3.8V
◆ Điện áp trộn:2.5V
——————————–
CKBB
◆ VẬN HÀNH: -25℃ ĐẾN + 60℃
◆ QUYỀN VỐN: 80F / 40mA ,250F / 120mAh,400F / 200mAh,1200F / 600mAh
◆ NĂNG LỰC NĂNG LỰC: -20%~ + 80%
◆ RATEDVOLTAGE: 2.5V-4.2V
◆ Điện áp trộn:2.5V
![](https://sh-jinpei.com/wp-content/plugins/js_composer/assets/vc/no_image.png)