Polimeru Elettrolitiku Kapaċitatur Ultra-Low ESR Cabai għall-Militari & difiża

Conductive polymer solid-state electrolyte is used to achieve ultra-low ESR.
Super interference absorption ability, excellent temperature and frequency
Military products meet the environmental requirements such as vibration and low pressure, and can be supplied according to the “seven specialty” level or the “general army”
It is suitable for filtering, energy storage and bypass in electronic circuits in aerospace, l-avjazzjoni, alpine, high altitude……

Oġġett	characteristic
medda tat-temperatura operattiva	-55℃ ~ + 105 ℃
Rated voltage range	2.5V~25V
Nominal capacitance range	10μF~3500μF
Allowable deviation of nominal capacitance (25° C, 120Hz)	M（±20% ）
DC leakage current（25℃，2min）*1	I≤0.2CRUR or 300 (μA) liema hu l-akbar CR: Nominal capacitance (μF); UR: Vultaġġ nominali (V)
The loss angle tangent tgδ（max）（25℃， 120Hz）	For details, please refer to the “List of Product Specifications and Technical Parameters”
ESR（max）（25℃，100KHz）*2	For details, please refer to the “List of Product Specifications and Technical Parameters”
High and low temperature characteristics (impedance ratio, 100KHz)	-55℃：Z-55℃/Z25℃≤1.25 105℃：Z105℃/Z25℃≤1.25
Durability (High Temperature Test)	The rated voltage is applied at 105°C for 2000h, and after recovery for 24h, the electrical performance of the rated voltage (25°C±5°C) is tested at room temperature
		Rate of change in kapaċità	≤± 20% of the initial measurement
		Loss tangent tgδ	≤ 150% of the initial specified value
		DC leakage current	≤ initial prescriptive value
		ESR	≤ 150% of the initial specified value
Steady-state damp heat	60 ° C, 90~95%RH storage for 1000h, recovery for 24h, room temperature [25 °C±5 °C] test, its electrical properties conform: