Ċilindru tal-kapaċitatur tal-joni tal-litju 15AH CKAA60140
Jinpei Lithium-ion capacitor (LIC) huwa tip ġdid ta 'apparat tal-ħażna tal-enerġija elettrika li jgħaqqad il-karatteristiċi tal-batteriji tal-jone tal-litju u supercapacitors. Għandu l-vantaġġi ta 'densità għolja ta' enerġija, densità ta 'qawwa għolja, ħajja ta 'ċiklu twil, eċċ.
Għandu firxa wiesgħa ta 'applikazzjonijiet f'vetturi elettriċi, ħażna ta 'enerġija rinnovabbli, sistemi tal-ħażna tal-enerġija industrijali u tad-dar, kif ukoll apparat elettroniku u oġġetti tal-konsumatur. Bil-progress kontinwu tat-teknoloġija u t-tnaqqis ulterjuri tal-ispiża, huwa mistenni li l-applikazzjoni tagħha fis-suq se tkun aktar u aktar estensiva.
-
Introduzzjoni
Din l-ispeċifikazzjoni tiddeskrivi l-proprjetajiet, metodi ta’ ttestjar u avviż tal- 60140 Flash Charge Lithium ion capacitors żviluppati minn Jinpei Electronics Co., Ltd.
2. Karatteristiċi Ġenerali
2.1 Karatteristiċi u Vantaġġi
- Ċarġ u kwittanza veloċi
- Ħajja taċ-ċiklu twil
- Prestazzjoni tajba f'temperatura baxxa
- Densità għolja ta 'enerġija
2.2 Applikazzjonijiet Tipiċi
Użu fil-ħażna tal-Enerġija, Ibda u waqqaf is-sistema,
grid intelliġenti, makkinarju tal-port UPS u sistema ta 'enerġija oħra.
3. Dehra tal-Prodott & Dimensjonijiet
3.1 Struttura & Dehra
4. Indiċi Tekniku tal-Prodott
4.1Parametri Ewlenin
|
Serje |
Merti |
Valuri |
| 1 | Kapaċitanza | 15Ah±5% |
| 2 | Was-HI | 4.2V |
| 3 | Was-LO | 2.5V |
| 4 | Reżistenza interna DC (10ms) | ≤0.6mΩ |
| 5 | Kurrent standard tal-iċċarġjar | 45A(3Ċ) |
| 6 | Kurrent tal-iċċarġjar ta 'malajr | 150A(10Ċ) |
| 7 | Kurrent ta 'discharge nominali | 45A(3Ċ) |
| 8 | Kurrent massimu ta 'skarigu kontinwu | 300A(20Ċ) |
| 9 | Ħin massimu ta 'skariku kontinwu | 90S |
| 10 | Temperatura massima tiżdied | 50± 5℃ |
|
11 |
Sigurtà |
GB/T 31485-2015《 Rekwiżiti u test tas-sigurtà tal-vetturi elettriċi
metodi għall-poter akkumulaturi》 |
| 12 | Ħlas&firxa tat-temperatura tal-ħruġ | -40~85℃ |
| 13 | Firxa tat-temperatura tal-ħażna | -40~55℃ |
| 14 | Ħajja taċ-ċiklu tal-iċċarġjar veloċi (@25±2℃，
Tkessiħ sfurzat) |
≥30,000 times(5Ċ) |
| 15 | Ħajja taċ-ċiklu tal-iċċarġjar bil-mod | ≥30,000 times (1Ċ) |
| 16 | Piż | ≤850g |
| 17 | Dimensjoni(D × H) | Φ60mm × 140mm |
4.2 Other Technical Information
-
Low temperature discharge performance Low temperature discharge curves
discharge current （A）
discharge time Discharge capacitance （MAH）
180 3min58s 11.89 200 3min12s 10.66 225 2min47s 10.44
Test method: f'temperatura tal-kamra, 3C constant current charge to 4.2V, constant voltage to 0.05c cutoff, put in the low-temperature -43℃ environment for 3h, discharge to 2.5V cutoff with different current.
Charge/discharge charge/discharge curves
Test method: f'temperatura tal-kamra, 3C constant current charge to 4.2V, constant voltage to 0.1c cut-off, use 2min, discharge current 1C to 2.5V cut-off.
Charge/discharge @1000A Discharge curves at large current
Test condition: 3C charge to 4.2V at normal temperature ,constant voltage to 0.2A cut-off , 1800A charge for 10s,15s interval after charge again,record test datasheet.
5 Testing Methods
5.1 Testing Conditions
This specification followed the standard testing criteria: 1 atm, 25±2 ℃ and a relative humidity < 65%.
5.2 Test for Capacitance/Internal resistance
Capacitance Test: Charge the cell to 4.2V by 1C current and the charge it by constant voltage until the current reached 0.1C. And then, discharge the cell to 2.5V at 1C current. After rested 30s ， repeated the last processes and regarded the second capacitance as cell’s capacitance.
Resistance test: Charge the cell to 4.2V by 3C current and charge until 0.1C current by constant voltage, test it’s ACR at 1kHZ Ac impedance meter. By the way, once test its capacitance, recorded its 10ms voltage difference during the discharge process, and the calculated its DCR by R=ΔU/I. Nota: the mix record time is 1s during the “Capacitance and resistance test “proces
Test for Low Temperature
Under the ordered temperature, constant charge the cell to 4.2V and then end it at 0.1C by constant voltage. Wara dan, remove the cell to different temperature condition (keep 2h) and discharge it to 2.5V at 1C current, record its discharge capacitance.Cycle life test
Under 25±5℃, test the cell’s original performance by “Capacitance/resistance method”, and then charge it to 4.0V by 5C current, discharge it to 2.5V at 2Cconstant current, after this rest 5min, cycle this processes 2000. Regarded the testing process at one cycle, and repeated it 15 drabi, until it reached 30000 drabi.
6 Notice
6.1 During Operation
- Working temperature of LIB should not exceed the upper and lower limits of the rated
- LIB should be used at rated
Check the polarity of LIB before power on. No reverse connecting.
Keep LIB away from heat. The temperature has a big influence on the working life of LIB(LIC).
Introduzzjoni
◆CAPACITANCERANGE:
1100mAh/2300F， 1500mAh/3100F，1900mAh/4000F， 2500mAh/5200F
◆VOLTAGE RATED: 3.6V
◆Volt-HI:4.2V
◆Volt-LO:2.5V
