Kapasitor elektrolit suhu tinggi ▏130 ℃ ▏Caea
1,000 ~ 3,000 jam terjamin
130° C.
For high temperature applications
Rohs patuh
The operating temperature of high temperature electrolytic capacitors can reach CAEB 125℃~CAEA 130℃, and they also have low ESR (resistansi seri ekuivalen) and high voltage resistance, which can meet the high frequency and large current requirements in high temperature environments.
Jinpei high temperature electrolytic capacitors paten tersedia are widely used in automotive electronics, industrial control equipment, power circuits, aerospace and other fields, especially in applications that need to face high temperature environments and harsh working conditions.
By choosing the right model and manufacturer, you can ensure that high temperature aluminum electrolytic capacitors provide stable and reliable performance in high temperature environments and extend the service life of the equipment.
Jinpei offer higher temperature capacitor to155℃ 175℃ 185℃ 200℃
Spesifikasi
| Item | Pertunjukan | |||||||||||||||
| Suhu Operasional
Jangkauan |
10 ~ 250V | 350 ~ 450v | ||||||||||||||
| -40°C ~ +130°C | -25°C ~ 130°C | |||||||||||||||
| Toleransi kapasitansi | +20% (pada 120Hz, 20° C.) | |||||||||||||||
|
Arus bocor (pada 20 ° C.) |
Tegangan Dinilai | < 100V | > 100V | |||||||||||||
| Waktu | setelah 2 menit | setelah 1 menit | ||||||||||||||
|
Arus bocor |
I = 0,01cv atau 3 (µa)
mana yang lebih besar |
Cv < 1000
I = 0.1CV+40 (µa) |
Cv > 1000
I = 0.04CV+100 (µa) |
|||||||||||||
| Dimana C = nilai kapasitansi dalam µF. V = Tegangan kerja DC terukur di V. | ||||||||||||||||
| Faktor Dissipasi | Tegangan Dinilai | 10 | 16 | 25 | 35 | 50 | 63 | 160 | 200 | 250 | 350 | 400 | 450 | |||
| (Tan ä pada 120Hz,20° C.) | Tan (Max) | 0.15 | 0.12 | 0.10 | 0.10 | 0.08 | 0.08 | 0.20 | 0.20 | 0.20 | 0.24 | 0.24 | 0.24 | |||
| Karakteristik suhu rendah
(pada 120Hz) |
Rasio impedansi tidak boleh melebihi nilai yang diberikan dalam tabel di bawah ini. | |||||||||||||||
| Tegangan Dinilai | 10 | 16 | 25 | 35 | 50 | 63 | 160 | 200 | 250 | 350 | 400 | 450 | ||||
| Impedanc e
Perbandingan |
Z (-25) / Z (+20° C.) | 3 | 2 | 2 | 2 | 2 | 2 | 3 | 3 | 3 | 6 | 6 | 6 | |||
| Z (-40) / Z (+20° C.) | 6 | 4 | 4 | 4 | 4 | 4 | 6 | 6 | 6 | – | – | – | ||||
| Waktu tes | 2,000 hrs for φD< φ8mm (125° C.)
3,000 hrs for φD> φ10mm (130° C.) |
|||||||||||||||
|
Tes Muat Kehidupan |
Perubahan kapasitansi | Di dalam + 20% nilai awal | ||||||||||||||
| Faktor Dissipasi | Kurang dari 200% dari nilai yang ditentukan | |||||||||||||||
| Arus bocor | Dalam nilai yang ditentukan | |||||||||||||||
| * The above specifications shall be satisfied when the capacitors are restored to 20°C after applied with rated subjected to DC voltage with the rated ripple current is applied for 2.000 / 3,000 hrs at 125°C / 130° C. | ||||||||||||||||
|
Tes umur simpan |
Waktu tes | 1,000 jam | ||||||||||||||
| Perubahan kapasitansi | Di dalam + 20% nilai awal | |||||||||||||||
| Faktor Dissipasi | Kurang dari 200% dari nilai yang ditentukan | |||||||||||||||
| Arus bocor | Kurang dari 500% dari nilai yang ditentukan | |||||||||||||||
| * Spesifikasi di atas harus dipenuhi ketika kapasitor dikembalikan ke 20°C setelah terpapar 1,000 hrs at 130°C
tanpa tegangan diterapkan. (The procedures before testing JIS C 5102 4.4) |
||||||||||||||||
| Standar lainnya | Jis c 5101-4 | |||||||||||||||
Spasi dan diameter timbal
Satuan: mm
| φD | 8 | 10 | 12.5 | 16 |
| P | 3.5 | 5.0 | 5.0 | 7.5 |
| φd | 0.6 | 0.8 | ||
| A | 1.0 | 1.5 | ||
| R | 0.5 | |||
Contoh nomor bagian
CAEA 100 M 1H BK 080 115
FITUR
◆ 1,000 ~ 3,000 hours assured 130°C
◆ For high temperature applications
◆ RoHS Compliant
