شاخص قابلیت اطمینان خازن الکترولیتی SNAP-INDAC CADAC برای ارتش & دفاع
- Solder pin structure, high pressure product, حجم کم。
- There are reliability indicators, and there are five levels of failure rate（λ≤1×10-5）
- It meets the environmental requirements of the national military standard GJB603A-2021
- such as vibration, low pressure, and humidity resistance
It is suitable for filtering and energy storage in the electronic unified circuit of aerospace, هواپیمایی, الپین, high altitude and ocean
| مورد | مشخصه | ||||
| مقدار درجه حرارت | -40℃ ~ 105 ℃ | ||||
| Rated operating voltage range | 400V ~ 450V | ||||
| محدوده ظرفیت اسمی | 82~1000μF | ||||
| Allowable deviation of nominal
ظرفیت |
M 20 ± 20 ٪） | （25 ℃，100هرتز | |||
| DC leakage curren（t 25℃，5حداقل | l≤0.01CRUR（μA） | CR：Nominal capacitance (μF); UR: ولتاژ محاسبه شده (V) | |||
| DFδ (حداکثر) | برای جزئیات بیشتر, please refer to the “List of Product Specifications and Technical Parameters”
（25 ℃，100هرتز |
||||
| Temperature characteristics
(100هرتز, impedance ratio) |
Z-40℃/Z+25℃≤12 | ||||
| Rated ripple current | برای جزئیات بیشتر, please refer to the “List of Product Specifications and Technical Parameters”
（105℃，100هرتز |
||||
|
دوام (High Temperature Test) |
The rated voltage with ripple current is applied at 105℃ for 2000h, and after recovery for 24h, the rated voltage with ripple current is tested at room temperature (25℃±5℃), and its
electrical performance is in accordance with the test： |
||||
| Rate of change in capacitance | ≤±20% Initial measurements | ||||
| DC leakage current | ≤Initial prescriptive value | ||||
| The DF | ≤200% Initial measurements | ||||
|
در دماهای بالا ذخیره کنید |
Left at 105℃ for 1000h, after the test, the normal temperature (25℃±5℃) was restored to
the test, and its electrical properties were in line with： |
||||
| Rate of change in capacitance | ≤±15% Initial measurements | ||||
| DC leakage current | ≤200% Initial prescriptive value | ||||
| The DF | ≤200% Initial measurements | ||||
inquiry 
inquiry@sh-jinpei.com 
