Радиальный полимерный электролитический конденсатор с низкой ESR Cabad для военных & оборона
- 125°C series, high heat resistance, leaded
- Низкая СОЭ, high frequency and low
- The national military standard level meets the environmental requirements of vibration and low
- It is suitable for energy storage, filtering and bypass in electronic circuits in aerospace, авиация, cold, high altitude and ocean.
| Элемент | характеристика | |||
| Диапазон рабочих температур | -55℃ ~ + 125 ℃ | |||
| Rated operating voltage range | 10В ~ 100В | |||
| Номинальный диапазон емкости | 8.2μF~22000μF | |||
| Allowable deviation of nominal
емкость |
M（±20%） （25℃，120Гц) | |||
| DC leakage current*1 | I≤0.01CRUR（μA） （25℃，2min）
CR: Номинальная емкость (мкФ); UR: Номинальное напряжение (V) |
|||
| Потеря тангенс TgΔ (Максимум) | For details, please refer to the “List of Product Specifications and Technical
Параметры”（25℃，120Гц) |
|||
| ESR (максимум)*2 | For details, please refer to the “List of Product Specifications and Technical
Параметры”（25℃，100KHz） |
|||
| Low temperature characteristics
(capacitance rate of change) |
(C25℃°-C55℃）/C25℃≤35% （25℃，120Гц) | |||
|
Долговечность (High Temperature Test) |
The rated voltage is applied at 125°C for 2000h, and after recovery for 24h, the test is
при комнатной температуре (25° C ± 5 ° C.), and its electrical performance conforms to: |
|||
| Rate of change in capacitance | ≤ ± 15% of initial measurements | |||
| Ток утечки постоянного тока | ≤ начальное предписывающее значение | |||
| The loss angle is tangent | ≤ initial measurements | |||
| ESR | ≤ 200% первоначального измерения | |||
|
Store at high temperatures |
After storage at 125 °C for 1000h, recovery for 24 час, and test at room temperature
(25 °C±5 °C), its electrical performance conforms to: |
|||
| Rate of change in capacitance | ≤ ± 15% of initial measurements | |||
| Ток утечки постоянного тока | ≤ начальное предписывающее значение | |||
| The loss angle is tangent | ≤ initial measurements | |||
| ESR | ≤ 200% первоначального измерения | |||
inquiry 
inquiry@sh-jinpei.com 
