Алюминиевый электролитический конденсатор CAAAA для военных & оборона
Military products meet the environmental requirements of vibration
and low pressure, and military products can be supplied according to the “seven specialty” level or the “general army” level.
It is suitable for filtering, coupling and bypass in electronic circuits in aerospace, авиация, alpine, high altitude and
※Main technical parameters:
| project | characteristic | ||||||||
| Operating temperature range | -55℃-+105℃ | ||||||||
| Rated voltage range | 16V-450V | ||||||||
| Nominal capacitance range | 82μF-22000μF | ||||||||
| Allowable deviation of nominal capacitance
（25℃，120Hz） |
M（±20%） | ||||||||
| DC leakage current（25℃，5min） | I≤0.01CRUR（μA）；CR：Nominal capacitance（μF）；UR：Rated voltage（V） | ||||||||
| Loss tangent tgδ (Максимум)（25℃，120Hz） | For details, please refer to the “List of Product Specifications and Technical
Параметры” |
||||||||
|
Температурные характеристики (120 Hz.) |
Impedance ratio |
UR（V） | 16 | 25-100 | 160-250 | 350-450 | |||
| Z-55℃/ Z+25℃ | ≤5 | ≤3 | ≤7 | ≤12 | |||||
| Rate of change in
емкость |
（C+25℃-C-55℃）/C+25℃≤20% | ||||||||
|
Durability |
The rated voltage with ripple current is applied at 105°C for 5000h, and after recovery for 24h, the electrical performance is tested at room temperature
(25°C±5°C), and its electrical performance conforms to: |
||||||||
| Rate of change in capacitance | ≤± 20% of the initial value | ||||||||
| The loss angle tangent tgδ | ≤ 200% of the initial specified value | ||||||||
| DC leakage current | ≤ initial prescriptive value | ||||||||
|
Store at high temperatures |
After storage at 105°C for 1000h, recovery for 24h, and test at room temperature
(25°C±5°C), its electrical performance conforms to: |
||||||||
| Rate of change in capacitance | ≤± 20% of the initial value | ||||||||
| The loss angle tangent tgδ | ≤ 200% of the initial specified value | ||||||||
| DC leakage current | ≤ 200% of the initial specified value | ||||||||
Executive standard number: Q/MN118-2016 Seven special standard number: QZJ840634
※Outline drawing and size table (мм)
※ parameters of sheet
| Rated Voltage/V | Шапка
(мкФ) |
W×H×L
（mm） |
tgδ
（120Hz） |
Ripple curren Arms，120Гц | Rated Voltage/V | Шапка
(мкФ) |
W×H×L
（mm） |
tgδ
（120Hz） |
Ripple current Arms，120Гц | |
|
16 |
15000 | 35×16×35 | 0.47 | 4.2 | 100 | 1000 | 35×16×35 | 0.12 | 1.9 | |
| 22000 | 35×16×50 | 0.61 | 4.5 | 1500 | 35×16×50 | 0.12 | 2.7 | |||
|
25 |
8200 | 35×16×35 | 0.31 | 3.0 | 160 | 560 | 35×16×35 | 0.20 | 1.4 | |
| 15000 | 35×16×50 | 0.45 | 4.8 | 680 | 35×16×50 | 0.20 | 1.8 | |||
|
35 |
5000 | 35×16×35 | 0.22 | 2.3 |
200 |
330 | 35×16×35 | 0.20 | 1.1 | |
| 6800 | 35×16×50 | 0.25 | 2.6 | 470 | 35×16×50 | 0.20 | 1.2 | |||
| 8200 | 35×16×50 | 0.28 | 3.1 | 560 | 35×16×50 | 0.20 | 1.4 | |||
|
50 |
3300 | 35×16×35 | 0.15 | 2.5 |
250 |
270 | 35×16×35 | 0.20 | 0.8 | |
| 4700 | 35×16×35 | 0.18 | 2.5 | 330 | 35×16×50 | 0.20 | 1.4 | |||
| 5000 | 35×16×50 | 0.19 | 3.3 | 470 | 35×16×50 | 0.20 | 1.6 | |||
| 6800 | 35×16×50 | 0.22 | 3.5 | 350 | 150 | 35×16×35 | 0.20 | 0.7 | ||
|
63 |
2700 | 35×16×35 | 0.14 | 2.2 | 220 | 35×16×50 | 0.20 | 1.3 | ||
| 3300 | 35×16×50 | 0.15 | 2.7 | 400 | 100 | 35×16×35 | 0.20 | 0.5 | ||
|
80 |
1500 | 35×16×35 | 0.12 | 2.0 | 150 | 35×16×50 | 0.20 | 1.1 | ||
| 2200 | 35×16×50 | 0.13 | 2.7 | 450 | 82 | 35×16×35 | 0.20 | 0.3 | ||
| 100 | 35×16×50 | 0.20 | 0.7 | |||||||
inquiry 
inquiry@sh-jinpei.com 
