Polymer electrolytic capacitor low indepedance ESR CABAJ for military & Vörn

High pressure resistant
Low ESR with high frequency and low
Military products meet the environmental requirements such as vibration and low pressure, and can be supplied according to the “seven specialty” level or the “general army”
It is suitable for filtering, energy storage and bypass in electronic circuits in aerospace, flug, alpine, high altitude……

Atriði	characteristic
Hitastigi á bilinu	-55℃ ~ + 105 ℃
Rated operating voltage range	35V ~ 100V
Nominal capacitance (25° C, 120Hz)	4.7μF~2200μF
Allowable deviation of nominal rýmd (25° C, 120Hz)	M（±20% ）
DC leakage current（25℃，2min）*1	I≤0.02CRUR（μA） CR: Nominal capacitance (μF); UR: Málspenna (V)
Tap tangans (hámark) (25° C, 120Hz)	For details, please refer to the “List of Product Specifications and Technical Færibreytur”
ESR（max）（25℃，100KHz）*2	For details, please refer to the “List of Product Specifications and Technical Færibreytur”
High and low temperature characteristics (impedance ratio, 100KHz)	-55° C: Z-55°C /Z+25°C≤1.25;105° C:Z105°C/ Z+25°C≤1.25
Durability (High Temperature Test)	The rated voltage is applied at 105°C for 2000h, and after recovery for 24h, the electrical performance of the rated voltage (25°C±5°C) is tested at room hitastig
		Rate of change in capacitance	≤± 20% of the initial measurement
		The loss angle is tangent	≤ 150% of the initial measurement
		DC leakage current	≤ initial prescriptive value
		ESR	≤ 150% of the initial measurement
Steady-state damp heat	60 ° C, 90~95%RH storage for 1000h, recovery for 24h, room temperature (25±5 °C) test, its electrical performance confo rms:
		Rate of change in capacitance	≤± 20% of the initial measurement
		The loss angle is tangent	≤ 150% of the initial specified value
		DC leakage current	≤ initial prescriptive value
		ESR	≤ 150% of the initial specified value