Metalliséierte polyprophylene Film Capanitonized | Box niddereg Verloscht| CDBD - Spezialiséiert op der Erlaabnesproduktioun zënter 2005.

Metalliséierte polyprophylene Film Capanitonized | Box niddereg Verloscht| CDBD

FONTassementer

Niddereg Verloscht bei héijer Frequenz
Bewäert Spannung : 160VDC ~ 2000 VDC(90Vac ~ 700 Vac)
Kapazitéitsberäich : 00056 ~15 uF
Plastik Fall (Konform zu UL 94V-0), epoxy resomsealing
RoHS-kompatibel a Bleifräi Terminatiounen
Vill an héich Frequenz benotzt, DC, AC an pulsecircuits

Datasheet-Fir-Metallized-Polypropylene-Film-Capacitor-Plastic-Case-Box-CDBD.pdf (3594 Downloads )

FONTassementer

◆ Niddereg Verloscht bei héijer Frequenz
◆ Bewäert Spannung : 160VDC ~ 2000 VDC(90Vac ~ 700 Vac)
◆ Kapazitéitsberäich : 0.00056 ~15 uF
◆ Plastikkëscht (Konform zu UL 94V-0), Epoxy Resom Dichtung
◆ RoHS-kompatibel a Bleifräi Terminatiounen
◆ Vill an héich Frequenz benotzt, DC, AC an Pulsatiounsperiod Kreesleef

Deel Zuel Beispill

Elektresch Charakteristiken

Artikelen	Performech
Operatiounsgänger	160VDC ~ 2.000 VDC (90Vac ~ 700 Vac)
Bewäerten Temperatur	-55°C ~ +105°C (Derates iwwer 85 ° C : 1.25%pro °C vun der Nominell Spannung)
Benotzbar Uewerkategorie Temperatur	+105° C (Reduktioun iwwer +85 °C: 1.25% pro °Cof Nominell Spannung)
Klimatesch Kategorie	55 / 105 / 56
Capakitance Range	0.00056 µF ~ 15µF
Trimitatanz Toleranz	5% (Jin), 10% (K St), aner Toleranzen op Ufro
Volt Beweis	1.6 Ur( 5s )
Dissipization Faktor	≤ 10 x 10-4 (1KHZ, 20° C)
Isolatioun Resistenz	R ≥100.000MΩ, CN≤ 0.33 μF (20° C, 100VR, 1min) RCN≥30.000s, CN> 0.33 μF
Maximum PulseRise Zäit (dV/dt) Wann d'Aarbechtsspannung (VR) ass niddereg wéi d'Bewäertte Spannung (VR), de Kondensator kann op enger méi héijer dV / dt geschafft ginn. An dësem Fall, de maximal erlaabt ed dV / dt gëtt kritt andeems de richtege Wäert mat VR / V multiplizéiert gëtt.	Spannung (Vdc)	max. Pulserhéijung Zäit, dV/dt (V/µSek), Gesicht < 25° C
	Spannung (Vdc)	P= 5.0	P= 7.5	P= 10.0	P= 15.0	P= 22.5	P=27,5	P=37,5
	160	110	310	190	110	65	55	—
	250	270	660	560	310	130	110	—
	400	440	900	780	600	300	130	100
	630	550	1,500	1,200	900	400	200	—
	1,000	—	—	2,200	2,000	800	—	—
	1,600	—	—	—	4,500	1,800	—	—
	2,000	—	—	—	9,500	4,500	—	—

Wave Soldering Empfehlungen

Bewäertungen & DIMENSIOUNEN (mm)

(μF)	Schaffen Spannung	160Vdc (2C)
	Schaffen Spannung	90Vac
	CODE CODEN	W-W	H H H	T	P	stierwen
0.027	273	7.2	7.5	3.5	5.0	0.5
0.033	333	7.2	7.5	3.5	5.0	0.5
0.039	393	7.2	7.5	3.5	5.0	0.5
0.047	473	7.2	9.5	4.5	5.0	0.5
0.056	563	7.2	9.5	4.5	5.0	0.5
0.068	683	7.2	9.5	4.5	5.0	0.5
0.068	683	10.5	9.0	4.0	7.5	0.6
0.082	823	7.2	10.0	5.0	5.0	0.5
		10.5	9.0	4.0	7.5	0.6
		13.0	9.0	4.0	10.0	0.6
0.1	104	7.2	10.0	5.0	5.0	0.5
		10.5	11.0	5.0	7.5	0.6
		13.0	9.0	4.0	10.0	0.6
0.12	124	7.2	11.0	6.0	5.0	0.5
		10.5	11.0	5.0	7.5	0.6
		13.0	11.0	5.0	10.0	0.6
0.15	154	7.2	11.0	6.0	5.0	0.5
		10.5	12.0	6.0	7.5	0.6
		13.0	11.0	5.0	10.0	0.6
0.18	184	10.5	12.0	6.0	7.5	0.6
		13.0	11.0	5.0	10.0	0.6
		17.5	11.0	5.0	15.0	0.8
0.22	224	13.0	12.0	6.0	10.0	0.6
0.22	224	17.5	11.0	5.0	15.0	0.8
0.27	274	13.0	12.0	6.0	10.0	0.6
0.27	274	17.5	11.0	5.0	15.0	0.8
0.33	334	17.5	11.0	5.0	15.0	0.8
0.39	394	17.5	12.0	6.0	15.0	0.8
0.47	474	17.5	12.0	6.0	15.0	0.8
0.47	474	26.5	15.0	6.0	22.5	0.8
0.56	564	17.5	13.5	7.5	15.0	0.8
0.56	564	26.5	15.0	6.0	22.5	0.8

(μF)	Schaffen Spannung	160Vdc (2C)
	Schaffen Spannung	90Vac
	CODE CODEN	W-W	H H H	T	P	stierwen
0.68	684	17.5	13.5	7.5	15.0	0.8
0.68	684	26.5	15.0	6.0	22.5	0.8
0.82	824	17.5	14.5	8.5	15.0	0.8
0.82	824	26.5	16.0	7.0	22.5	0.8
1	105	17.5	16.0	10.0	15.0	0.8
		26.5	16.0	7.0	22.5	0.8
		32.0	18.0	9.0	27.5	0.8
1.2	125	17.5	16.0	10.0	15.0	0.8
		26.5	17.0	8.5	22.5	0.8
		32.0	18.0	9.0	27.5	0.8
1.5	155	17.5	19.0	11.0	15.0	0.8
		26.5	17.0	8.5	22.5	0.8
		32.0	18.0	9.0	27.5	0.8
1.8	185	17.5	19.0	11.0	15.0	0.8
		26.5	18.5	10.0	22.5	0.8
		32.0	18.0	9.0	27.5	0.8
2.2	225	26.5	20.0	11.0	22.5	0.8
2.2	225	32.0	18.0	9.0	27.5	0.8
2.5	255	26.5	20.0	11.0	22.5	0.8
2.7	275	26.5	22.0	12.0	22.5	0.8
2.7	275	32.0	20.0	11.0	27.5	0.8
3.3	335	26.5	22.0	12.0	22.5	0.8
3.3	335	32.0	20.0	11.0	27.5	0.8
3.9	395	32.0	22.0	13.0	27.5	0.8
4.7	475	32.0	28.0	14.0	27.5	0.8
6.8	685	32.0	33.0	18.0	27.5	0.8
8.2	825	32.0	33.0	18.0	27.5	0.8
10	106	32.0	33.0	18.0	27.5	0.8
12	126	32.0	37.0	22.0c	op 2t7in.5u	e..0…8..
15	156	32.0	37.0	22.0	27.5	0.8

Bewäertungen & DIMENSIOUNEN (mm) weider

(μF)	Schaffen Spannung	250Vdc (2E)
	Schaffen Spannung	180Vac
	CODE CODEN	W-W	H H H	T	P	stierwen
0.01	103	7.2	7.5	3.5	5.0	0.5
0.012	123	7.2	7.5	3.5	5.0	0.5
0.015	153	7.2	7.5	3.5	5.0	0.5
0.018	183	7.2	7.5	3.5	5.0	0.5
0.022	223	7.2	7.5	3.5	5.0	0.5
0.027	273	7.2	7.5	3.5	5.0	0.5
0.027	273	10.5	9.0	4.0	7.5	0.6
0.033	333	7.2	9.5	4.5	5.0	0.5
		10.5	9.0	4.0	7.5	0.6
		13.0	9.0	4.0	10.0	0.6
0.039	393	7.2	9.5	4.5	5.0	0.5
		10.5	9.0	4.0	7.5	0.6
		13.0	9.0	4.0	10.0	0.6
0.047	473	7.2	9.5	4.5	5.0	0.5
		10.5	9.0	4.0	7.5	0.6
		13.0	9.0	4.0	10.0	0.6
0.056	563	7.2	9.5	4.5	5.0	0.5
		10.5	9.0	4.0	7.5	0.6
		13.0	9.0	4.0	10.0	0.6
0.068	683	7.2	10.0	5.0	5.0	0.6
		10.5	9.0	4.0	7.5	0.6
		13.0	9.0	4.0	10.0	0.6
0.082	823	7.2	10.0	5.0	5.0	0.6
		10.5	11.0	5.0	7.5	0.6
		13.0	9.0	4.0	10.0	0.6
0.1	104	7.2	11.0	6.0	5.0	0.6
		10.5	11.0	5.0	7.5	0.6
		13.0	11.0	5.0	10.0	0.6
		17.5	11.0	5.0	15.0	0.8
0.12	124	7.2	11.0	6.0	5.0	0.6
		10.5	11.0	5.0	7.5	0.6
		13.0	11.0	5.0	10.0	0.6
		17.5	11.0	5.0	15.0	0.8
0.15	154	10.5	12.0	6.0	7.5	0.6
		13.0	11.0	5.0	10.0	0.6
		17.5	11.0	5.0	15.0	0.8
0.18	184	10.5	12.0	6.0	7.5	0.6
		13.0	12.0	6.0	10.0	0.6
		17.5	11.0	5.0	15.0	0.8

(μF)	Schaffen Spannung	250Vdc (2E)
	Schaffen Spannung	180Vac
	CODE CODEN	W-W	H H H	T	P	stierwen
0.22	224	13.0	12.0	6.0	10.0	0.6
0.22	224	17.5	11.0	5.0	15.0	0.8
0.27	274	17.5	12.0	6.0	15.0	0.8
0.33	334	17.5	12.0	6.0	15.0	0.8
0.39	394	17.5	13.5	7.5	15.0	0.8
0.39	394	26.5	15.0	6.0	22.5	0.8
0.47	474	17.5	13.5	7.5	15.0	0.8
0.47	474	26.5	15.0	6.0	22.5	0.8
0.56	564	17.5	13.5	7.5	15.0	0.8
0.56	564	26.5	15.0	6.0	22.5	0.8
0.68	684	17.5	14.5	8.5	15.0	0.8
0.68	684	26.5	15.0	6.0	22.5	0.8
0.82	824	17.5	16.0	10.0	15.0	0.8
		26.5	15.0	6.0	22.5	0.8
		32.0	18.0	9.0	27.5	0.8
1	105	17.5	16.0	10.0	15.0	0.8
		26.5	16.0	7.0	22.5	0.8
		32.0	18.0	9.0	27.5	0.8
1.2	125	17.5	19.0	11.0	15.0	0.8
		26.5	17.0	8.5	22.5	0.8
		32.0	18.0	9.0	27.5	0.8
1.5	155	26.5	17.0	8.5	22.5	0.8
1.5	155	32.0	18.0	9.0	27.5	0.8
1.8	185	26.5	18.5	10.0	22.5	0.8
1.8	185	32.0	18.0	9.0	27.5	0.8
2.2	225	26.5	20.0	11.0	22.5	0.8
2.2	225	32.0	20.0	11.0	27.5	0.8
2.5	255	32.0	20.0	11.0	27.5	0.8
2.7	275	26.5	22.0	12.0	22.5	0.8
2.7	275	32.0	20.0	11.0	27.5	0.8
3.3	335	32.0	20.0	11.0	27.5	0.8
3.9	395	32.0	22.0	13.0	27.5	0.8
4.7	475	32.0	28.0	14.0	27.5	0.8
5.6	565	32.0	24.5	15.0	27.5	0.8
6.8	685	32.0	33.0	18.0	27.5	0.8
8.2	825	32.0	33.0	18.0	27.5	0.8
10	106	32.0	33.0	18.0	27.5	0.8
12	126	32.0	37.0	22.0	27.5	0.8
15	156	32.0	37.0	22.0	27.5	0.8

Bewäertungen & DIMENSIOUNEN (mm) weider

(μF)	Schaffen Spannung	400Vdc (2G)
	Schaffen Spannung	250Vac
	CODE CODEN	W-W	H H H	T	P	stierwen
0.0039	392	7.2	7.5	3.5	5.0	0.5
0.0047	472	7.2	7.5	3.5	5.0	0.5
0.0056	562	7.2	7.5	3.5	5.0	0.5
0.0068	682	7.2	7.5	3.5	5.0	0.5
0.0082	822	7.2	7.5	3.5	5.0	0.5
0.01	103	7.2	7.5	3.5	5.0	0.5
0.01	103	10.5	9.0	4.0	7.5	0.6
0.012	123	7.2	7.5	3.5	5.0	0.5
0.012	123	10.5	9.0	4.0	7.5	0.6
0.015	153	7.2	9.5	4.5	5.0	0.6
		10.5	9.0	4.0	7.5	0.6
		13.0	9.0	4.0	10.0	0.6
0.018	183	7.2	9.5	4.5	5.0	0.6
		10.5	9.0	4.0	7.5	0.6
		13.0	9.0	4.0	10.0	0.6
0.022	223	7.2	9.5	4.5	5.0	0.6
		10.5	9.0	4.0	7.5	0.6
		13.0	9.0	4.0	10.0	0.6
0.027	273	7.2	10.0	5.0	5.0	0.6
		10.5	9.0	4.0	7.5	0.6
		13.0	9.0	4.0	10.0	0.6
0.033	333	7.2	11.0	6.0	5.0	0.6
		10.5	11.0	5.0	7.5	0.6
		13.0	9.0	4.0	10.0	0.6
0.039	393	7.2	11.0	6.0	5.0	0.6
		10.5	11.0	5.0	7.5	0.6
		13.0	9.0	4.0	10.0	0.6
0.047	473	7.2	11.0	6.0	5.0	0.6
		10.5	11.0	5.0	7.5	0.6
		13.0	11.0	5.0	10.0	0.6
0.056	563	10.5	12.0	6.0	7.5	0.6
0.056	563	13.0	11.0	5.0	10.0	0.6
0.068	683	10.5	12.0	6.0	7.5	0.6
		13.0	11.0	5.0	10.0	0.6
		17.5	11.0	5.0	15.0	0.8
0.082	823	13.0	12.0	6.0	10.0	0.6
0.082	823	17.5	11.0	5.0	15.0	0.8
0.1	104	13.0	12.0	6.0	10.0	0.8
0.1	104	17.5	11.0	5.0	15.0	0.8

(μF)	Schaffen Spannung	400Vdc (2G)
	Schaffen Spannung	250Vac
	CODE CODEN	W-W	H H H	T	P	stierwen
0.12	124	17.5	11.0	5.0	15.0	0.8
0.15	154	17.5	12.0	6.0	15.0	0.8
0.18	184	17.5	12.0	6.0	15.0	0.8
0.18	184	26.5	15.0	6.0	22.5	0.8
0.22	224	17.5	13.5	7.5	15.0	0.8
0.22	224	26.5	15.0	6.0	22.5	0.8
0.27	274	17.5	13.5	7.5	15.0	0.8
0.27	274	26.5	15.0	6.0	22.5	0.8
0.33	334	17.5	14.5	8.5	15.0	0.8
0.33	334	26.5	15.0	6.0	22.5	0.8
0.39	394	17.5	16.0	10.0	15.0	0.8
0.39	394	26.5	16.0	7.0	22.5	0.8
0.47	474	17.5	16.0	10.0	15.0	0.8
0.47	474	26.5	16.0	7.0	22.5	0.8
0.56	564	17.5	19.0	11.0	15.0	0.8
		26.5	17.0	8.5	22.5	0.8
		32.0	18.0	9.0	27.5	0.8
0.68	684	17.5	19.0	11.0	15.0	0.8
		26.5	17.0	8.5	22.5	0.8
		32.0	18.0	9.0	27.5	0.8
0.82	824	26.5	18.5	10.0	22.5	0.8
0.82	824	32.0	18.0	9.0	27.5	0.8
1	105	26.5	20.0	11.0	22.5	0.8
1	105	32.0	18.0	9.0	27.5	0.8
1.2	125	26.5	22.0	12.0	22.5	0.8
1.2	125	32.0	20.0	11.0	27.5	0.8
1.5	155	26.5	22.0	12.0	22.5	0.8
1.5	155	32.0	20.0	11.0	27.5	0.8
1.8	185	32.0	22.0	13.0	27.5	0.8
2.2	225	32.0	24.5	15.0	27.5	0.8
2.5	255	32.0	28.0	14.0	27.5	0.8
2.7	275	32.0	28.0	14.0	27.5	0.8
3.3	335	32.0	33.0	18.0	27.5	0.8
3.9	395	32.0	33.0	18.0	27.5	0.8
4.7	475	32.0	37.0	22.0	27.5	0.8
4.7	475	42.0	31.5	18.0	37.5	0.8
5.6	565	32.0	37.0	22.0	27.5	0.8

Bewäertungen & DIMENSIOUNEN (mm) weider

(μF)	Schaffen Spannung	630Vdc (2Jin)
	Schaffen Spannung	400Vac
	CODE CODEN	W-W	H H H	T	P	stierwen
0.001	102	7.2	7.5	3.5	5.0	0.5
		10.5	9.0	4.0	7.5	0.6
		13.0	9.0	4.0	10.0	0.6
0.0012	122	7.2	7.5	3.5	5.0	0.5
		10.5	9.0	4.0	7.5	0.6
		13.0	9.0	4.0	10.0	0.6
0.0015	152	7.2	7.5	3.5	5.0	0.5
		10.5	9.0	4.0	7.5	0.6
		13.0	9.0	4.0	10.0	0.6
0.0018	182	7.2	7.5	3.5	5.0	0.5
		10.5	9.0	4.0	7.5	0.6
		13.0	9.0	4.0	10.0	0.6
0.0022	222	7.2	7.5	3.5	5.0	0.5
		10.5	9.0	4.0	7.5	0.6
		13.0	9.0	4.0	10.0	0.6
0.0027	272	7.2	7.5	3.5	5.0	0.5
		10.5	9.0	4.0	7.5	0.6
		13.0	9.0	4.0	10.0	0.6
0.0033	332	7.2	7.5	3.5	5.0	0.5
		10.5	9.0	4.0	7.5	0.6
		13.0	9.0	4.0	10.0	0.6
0.0039	392	7.2	9.5	4.5	5.0	0.5
		10.5	9.0	4.0	7.5	0.6
		13.0	9.0	4.0	10.0	0.6
0.0047	472	7.2	9.5	4.5	5.0	0.5
		10.5	9.0	4.0	7.5	0.6
		13.0	9.0	4.0	10.0	0.6
0.0056	562	7.2	10.0	5.0	5.0	0.5
		10.5	9.0	4.0	7.5	0.6
		13.0	9.0	4.0	10.0	0.6
0.0068	682	7.2	10.0	5.0	5.0	0.5
		10.5	9.0	4.0	7.5	0.6
		13.0	9.0	4.0	10.0	0.6
0.0082	822	7.2	11.0	6.0	5.0	0.5
		10.5	9.0	4.0	7.5	0.6
		13.0	9.0	4.0	10.0	0.6
0.01	103	7.2	11.0	6.0	5.0	0.5
		10.5	9.0	4.0	7.5	0.6
		13.0	9.0	4.0	10.0	0.6
0.012	123	7.2	11.0	6.0	5.0	0.5
		10.5	9.0	4.0	7.5	0.6
		13.0	9.0	4.0	10.0	0.6
0.015	153	10.5	11.0	5.0	7.5	0.6
0.015	153	13.0	9.0	4.0	10.0	0.6
0.018	183	10.5	11.0	5.0	7.5	0.6
0.018	183	13.0	9.0	4.0	10.0	0.6
0.022	223	10.5	11.0	5.0	7.5	0.6
0.022	223	13.0	11.0	5.0	10.0	0.6

(μF)	Schaffen Spannung	630Vdc (2Jin)
	Schaffen Spannung	400Vac
	CODE CODEN	W-W	H H H	T	P	stierwen
0.027	273	10.5	12.0	6.0	7.5	0.6
		13.0	11.0	5.0	10.0	0.6
		17.5	11.0	5.0	15.0	0.8
0.033	333	10.5	12.0	6.0	7.5	0.6
		13.0	11.0	5.0	10.0	0.6
		17.5	11.0	5.0	15.0	0.8
0.039	393	13.0	12.0	6.0	10.0	0.6
0.039	393	17.5	11.0	5.0	15.0	0.8
0.047	473	13.0	12.0	6.0	10.0	0.6
0.047	473	17.5	11.0	5.0	15.0	0.8
0.056	563	17.5	11.0	5.0	15.0	0.8
0.068	683	17.5	12.0	6.0	15.0	0.8
0.082	823	17.5	12.0	6.0	15.0	0.8
0.082	823	26.5	15.0	6.0	22.5	0.8
0.1	104	17.5	13.5	7.5	15.0	0.8
0.1	104	26.5	15.0	6.0	22.5	0.8
0.12	124	17.5	13.5	7.5	15.0	0.8
0.12	124	26.5	15.0	6.0	22.5	0.8
0.15	154	17.5	13.5	7.5	15.0	0.8
0.15	154	26.5	15.0	6.0	22.5	0.8
0.18	184	17.5	14.5	8.5	15.0	0.8
0.18	184	26.5	15.0	6.0	22.5	0.8
0.22	224	17.5	16.0	10.0	15.0	0.8
0.22	224	26.5	16.0	7.0	22.5	0.8
0.27	274	17.5	19.0	11.0	15.0	0.8
0.27	274	26.5	17.0	8.5	22.5	0.8
0.33	334	17.5	19.0	11.0	15.0	0.8
		26.5	17.0	8.5	22.5	0.8
		32.0	18.0	9.0	27.5	0.8
0.39	394	26.5	18.5	10.0	22.5	0.8
0.39	394	32.0	18.0	9.0	27.5	0.8
0.47	474	26.5	18.5	10.0	22.5	0.8
0.47	474	32.0	18.0	9.0	27.5	0.8
0.56	564	26.5	20.0	11.0	22.5	0.8
0.56	564	32.0	20.0	11.0	27.5	0.8
0.68	684	26.5	22.0	12.0	22.5	0.8
0.68	684	32.0	20.0	11.0	27.5	0.8
0.82	824	32.0	20.0	11.0	27.5	0.8
1	105	32.0	22.0	13.0	27.5	0.8
1.2	125	32.0	24.5	15.0	27.5	0.8
1.5	155	32.0	28.0	14.0	27.5	0.8
1.8	185	32.0	33.0	18.0	27.5	0.8
2.2	225	32.0	33.0	18.0	27.5	0.8
2.7	275	32.0	37.0	22.0	27.5	0.8
3.3	335	32.0	37.0	22.0	27.5	0.8

Bewäertungen & DIMENSIOUNEN (mm) weider

(μF)	Schaffen Spannung	1000Vdc(3A K))					1600Vdc (3C)					2000Vdc (3D)
	Schaffen Spannung	600Vac					650Vac					700Vac
	CODE CODEN	W-W	H H H	T	P	stierwen	W-W	H H H	T	P	stierwen	W-W	H H H	T	P	stierwen
0.00056	561						17.5	11.0	5.0	15.0	0.8	17.5	11.0	5.0	15.0	0.8
0.00068	681						17.5	11.0	5.0	15.0	0.8	17.5	11.0	5.0	15.0	0.8
0.00082	821						17.5	11.0	5.0	15.0	0.8	17.5	11.0	5.0	15.0	0.8
0.001	102	13.0	9.0	4.0	10.0	0.6	17.5	11.0	5.0	15.0	0.8	17.5	11.0	5.0	15.0	0.8
0.0012	122	13.0	9.0	4.0	10.0	0.6	17.5	11.0	5.0	15.0	0.8	17.5	11.0	5.0	15.0	0.8
0.0015	152	13.0	9.0	4.0	10.0	0.6	17.5	11.0	5.0	15.0	0.8	17.5	11.0	5.0	15.0	0.8
0.0018	182	13.0	9.0	4.0	10.0	0.6	17.5	11.0	5.0	15.0	0.8	17.5	11.0	5.0	15.0	0.8
0.0022	222	13.0	9.0	4.0	10.0	0.6	17.5	11.0	5.0	15.0	0.8	17.5	11.0	5.0	15.0	0.8
0.0022	222	17.5	11.0	5.0	15.0	0.8	17.5	11.0	5.0	15.0	0.8	17.5	11.0	5.0	15.0	0.8
0.0027	272	13.0	9.0	4.0	10.0	0.6	17.5	11.0	5.0	15.0	0.8	17.5	11.0	5.0	15.0	0.8
0.0027	272	17.5	11.0	5.0	15.0	0.8	17.5	11.0	5.0	15.0	0.8	17.5	11.0	5.0	15.0	0.8
0.0033	332	13.0	9.0	4.0	10.0	0.6	17.5	11.0	5.0	15.0	0.8	17.5	11.0	5.0	15.0	0.8
0.0033	332	17.5	11.0	5.0	15.0	0.8	17.5	11.0	5.0	15.0	0.8	17.5	11.0	5.0	15.0	0.8
0.0039	392	13.0	9.0	4.0	10.0	0.6	17.5	11.0	5.0	15.0	0.8	17.5	11.0	5.0	15.0	0.8
0.0039	392	17.5	11.0	5.0	15.0	0.8	17.5	11.0	5.0	15.0	0.8	17.5	11.0	5.0	15.0	0.8
0.0047	472	13.0	11.0	5.0	10.0	0.6	17.5	11.0	5.0	15.0	0.8	17.5	11.0	5.0	15.0	0.8
0.0047	472	17.5	11.0	5.0	15.0	0.8	17.5	11.0	5.0	15.0	0.8	17.5	11.0	5.0	15.0	0.8
0.0056	562	13.0	11.0	5.0	10.0	0.6	17.5	11.0	5.0	15.0	0.8	17.5	12.0	6.0	15.0	0.8
0.0056	562	17.5	11.0	5.0	15.0	0.8	17.5	11.0	5.0	15.0	0.8	17.5	12.0	6.0	15.0	0.8
0.0068	682	13.0	11.0	5.0	10.0	0.6	17.5	11.0	5.0	15.0	0.8	17.5	12.0	6.0	15.0	0.8
0.0068	682	17.5	11.0	5.0	15.0	0.8	17.5	11.0	5.0	15.0	0.8	26.5	15.0	6.0	22.5	0.8
0.0082	822	13.0	12.0	6.0	10.0	0.6	17.5	12.0	6.0	15.0	0.8	17.5	13.5	7.5	15.0	0.8
0.0082	822	17.5	11.0	5.0	15.0	0.8	17.5	12.0	6.0	15.0	0.8	26.5	15.0	6.0	22.5	0.8
0.01	103	13.0	12.0	6.0	10.0	0.6	17.5	12.0	6.0	15.0	0.8	17.5	13.5	7.5	15.0	0.8
0.01	103	17.5	11.0	5.0	15.0	0.8	17.5	12.0	6.0	15.0	0.8	26.5	15.0	6.0	22.5	0.8
0.012	123	17.5	11.0	5.0	15.0	0.8	17.5	12.0	6.0	15.0	0.8	17.5	14.5	8.5	15.0	0.8
0.012	123	17.5	11.0	5.0	15.0	0.8	17.5	12.0	6.0	15.0	0.8	26.5	15.0	6.0	22.5	0.8
0.015	153	17.5	12.0	6.0	15.0	0.8	17.5	13.5	7.5	15.0	0.8	17.5	14.5	8.5	15.0	0.8
0.015	153	17.5	12.0	6.0	15.0	0.8	26.5	15.0	6.0	22.5	0.8	26.5	15.0	6.0	22.5	0.8
0.018	183	17.5	12.0	6.0	15.0	0.8	17.5	13.5	7.5	15.0	0.8	17.5	16.0	10.0	15.0	0.8
0.018	183	26.5	15.0	6.0	22.5	0.8	26.5	15.0	6.0	22.5	0.8	26.5	16.0	7.0	22.5	0.8
0.022	223	17.5	13.5	7.5	15.0	0.8	17.5	14.5	8.5	15.0	0.8	17.5	19.0	11.0	15.0	0.8
0.022	223	26.5	15.0	6.0	22.5	0.8	26.5	15.0	6.0	22.5	0.8	26.5	17.0	8.5	22.5	0.8
0.027	273	17.5	13.5	7.5	15.0	0.8	17.5	16.0	10.0	15.0	0.8	26.5	17.0	8.5	22.5	0.8
0.027	273	26.5	15.0	6.0	22.5	0.8	26.5	16.0	7.0	22.5	0.8	26.5	17.0	8.5	22.5	0.8
0.033	333	17.5	14.5	8.5	15.0	0.8	17.5	16.0	10.0	15.0	0.8	26.5	18.5	10.0	22.5	0.8
0.033	333	26.5	15.0	6.0	22.5	0.8	26.5	16.0	7.0	22.5	0.8	26.5	18.5	10.0	22.5	0.8
0.039	393	17.5	16.0	10.0	15.0	0.8	17.5	19.0	11.0	15.0	0.8	26.5	18.5	10.0	22.5	0.8
0.039	393	26.5	15.0	6.0	22.5	0.8	26.5	17.0	8.5	22.5	0.8	26.5	18.5	10.0	22.5	0.8
0.047	473	17.5	16.0	10.0	15.0	0.8	17.5	19.0	11.0	15.0	0.8	26.5	22.0	12.0	22.5	0.8
0.047	473	26.5	16.0	7.0	22.5	0.8	26.5	18.5	10.0	22.5	0.8	26.5	22.0	12.0	22.5	0.8
0.056	563	17.5	19.0	11.0	15.0	0.8	26.5	18.5	10.0	22.5	0.8	26.5	22.0	12.0	22.5	0.8
0.056	563	26.5	16.0	7.0	22.5	0.8	26.5	18.5	10.0	22.5	0.8
0.068	683	17.5	19.0	11.0	15.0	0.8	26.5	22.0	12.0	22.5	0.8
0.068	683	26.5	17.0	8.5	22.5	0.8	26.5	22.0	12.0	22.5	0.8
0.082	823	226.5	17.0	8.5	22.5	0.8	26.5	22.0	12.0	22.5	0.8
0.1	104	26.5	18.5	10.0	22.5	0.8	26.5	22.0	12.0	22.5	0.8
0.12	124	26.5	22.0	12.0	22.5	0.8
0.15	154	26.5	22.0	12.0	22.5	0.8

Vrms vs. Frequenz, typesch Wäert

RADIAL TAPING

Spezifikatioune

Broessdatsch	Busribd			Dimensioun (mm)
Broessdatsch	Busribd	Rt1	RT2	Rt3	RT 4	Tol.
Lead Wire Duerchmiesser	d	0.5 / 0.6	0.5 / 0.6	0.6	0.6 / 0.8	± 0.05
Tappiel	P	12.7	12.7	12.7	25.4	± 1
Fidderen Hole Pitch	Po	12.7	12.7	12.7	12.7	± 0.2
Zentrum vun der Lead Drot	P1	3.85	2.6 / 3.75	7.7	5.2	± 0.7
Zentrum vum Kierper	P2	6.35	6.35	12.7	12.7	± 1.3
Lead Spazéieren (Pech un d'Pitting)	F an	5	7.5	10	15	+ 0.6; -0.1
Komponent Ausrichtung	Δh	0	0	0	0	± 2
Héicht vun Componenet aus Tape Center	H H H	18.5	18.5	18.5	18.5	± 0.5
Carrier Tape Breet	W-W	18	18	18	18	+ 1; -0.5
Halt Dow n Tape Breet	Wa gewo	6	6	9	10	Min
Lach Positioun	Weá	9	9	9	9	± 0.5
Halt Dow n Tape Positioun	W2	3	3	3	3	Max
Fidderen Lach Duerchmiesser	Maach dat	4	4	4	4	± 0.2
Tape Dicke	T	0.5	0.5	0.5	0.5	± 0.2
Zuelfen	Figong	1 oder 2	1.2 oder 3	4	4

Bemuch: *Erlaabnes vum Akkumuléierte Pitch manner wéi 1mm op der Zomm vun 20 riichtchen.

*Kontinuéierlech eidel Komponent manner wéi 3 hannert Stécker.

*Total eidel op enger Reel manner wéi 1%.

EIA STANDARD RS-296-D AXIAL TAPE & REEL

Spezifikatioune

Kierper Duerchmiesser	Kierper Längt	Quantitéit Per Reel	Deeler Abstand ± 0,5m m (A K))	Tape Abstand ± 1,5m m (Elz)	Arbor Wou e (C)	Reel Duerchmiesser (D)	Hub Rezessioun (E)	Kär Duerchmiesser (F an)
< 5mm (0.197″)	< 16.5mm(0.65″) 16.51 – 28.45mm (0.651 – 1.12″) 28.46 – 37.00mm (1.121 – 1.45″)	4000	5mm(0.2″)	52.44mm(2.062″)	13.9mm bis 38,1 mm 0.054″ zu 1.5 “	76.2mm bis 355,6 mm 3.0″ zu 14.0 “	28.6mm bis 78,0 mm 1.126″ zu 3.071″	34.5mm bis 92,0 mm 1.374″ zu 3.626″
		4000	5mm(0.2″)	63.5mm (2.5″)
		4000	5mm(0.2″)	73.0mm (2.874″)
5.01 – 10mm(0.197 – 0.394″)	< 16.5mm(0.65″) 16.51 – 28.45mm (0.651 – 1.12″) 28.46 – 37.00mm (1.121 – 1.45″)	2000	10mm(0.4″)	52.44mm(2.062″)
		2000	10mm(0.4″)	63.5mm (2.5″)
		2000	10mm(0.4″)	73.0mm (2.874″)
10.01 – 15mm (0.394 – 0.591″)	< 16.5mm(0.65″) 16.51 – 28.45mm (0.651 – 1.12″) 28.46 – 37.00mm (1.121 – 1.45″)	1000	15mm(0.6″)	52.44mm(2.062″)
		1000	15mm(0.6″)	63.5mm (2.5″)
		1000	15mm(0.6″)	73.0mm (2.874″)

VERPAKKING

Verpakung Typ	Reel Verpakung			Munitioun Këscht Verpakung
Dimensiounen Eenheet: mm	A K)	14 ~ 30		A K)	50 +5 -2
	Elz	80 min
	D	370 max		Elz	260+2
	Weá	45 +5 -2
				C	330+2
	W2	55max
Verpackung pro Reel / Këscht	C< 0.022 1,500pcs		C>0.022 1,000pcs	C< 0.047 1,500pcs		C> 0.047 1,000pcs

Aféierung
CDBD Serie sinn speziell fir Power Factor Correction gebaut (PFC) Uwendungen. Film gouf ausgewielt an d'Metaliséierung gouf speziell fir PFC Applikatioun Ufuerderunge applizéiert

Metalliséierte polyprophylene Film Capanitonized | Box niddereg Verloscht| CDBD

Metalliséierte polyprophylene Film Capanitonized | Box niddereg Verloscht| CDBD

FONTassementer

FONTassementer

Deel Zuel Beispill

Elektresch Charakteristiken

Wave Soldering Empfehlungen

Bewäertungen & DIMENSIOUNEN (mm)

Bewäertungen & DIMENSIOUNEN (mm) weider

Bewäertungen & DIMENSIOUNEN (mm) weider

Bewäertungen & DIMENSIOUNEN (mm) weider

Vrms vs. Frequenz, typesch Wäert

RADIAL TAPING

Spezifikatioune

Bemuch: *Erlaabnes vum Akkumuléierte Pitch manner wéi 1mm op der Zomm vun 20 riichtchen.

EIA STANDARD RS-296-D AXIAL TAPE & REEL

Spezifikatioune

VERPAKKING

Verbonnen Posts