Snap-In Electrolytic Capacitors ▏105℃ 3,000Hrs ▏CAVB

Ойыртем
Has a snap-in terminal which can solder to PCB directly and need not fixture to save processing time.
Suitable for electronic equipment with medium-high voltage circuits. Printed circuit board terminal snap-in type and lug terminal type available.
3,000 Hour Life

Datasheet-For-Snap-In-Electrolytic-Capacitor-▏105℃-3000Hrs-▏CAVB.pdf (1034 загрузка)

Спецификация

Item	Performance
Operating Temp. Range	-40°C ~ +105°C
Правам Тема	±20% (at 120Hz, 20°C)
Идым Утечка (at 20°C)	I=0.02CV or 1.5mA whichever is smaller (after 5 минут) Where, C=rated capacitance in F. V=rated DC working voltage.
Энергопотеря Коэффициент (Tan at 120Hz, 20°C)	Номинальный Напряжений		16	25		35	50		63		100		160		200		250		350		400		450
	Tan (max)		0.40	0.30		0.25	0.20		0.15		0.10*		0.15		0.10*		0.10*		0.15		0.15		0.15
	*0.15 for D = 35mm
Low Temperature Characteristics (at 120Hz)	Impedance ratio shall not exceed the values given in the table below.
	Номинальный Напряжений						16	25		35		50	63	100		160		200	250	350		400		450
	Impedance Ratio	Z(-25°C) / Z(+20°C)					4	3		3		2	2	2		4		4	4	4		8		8
		Z(-40°C) / Z(+20°C)					15	10		8		6	6	5		4		8	10	16		18		20
Load Life Test	Test Time		3000 шагат
	Йоҥгытшо Вашталт		Within ±20% of initial value
	Энергопотеря Коэффициент		Шагал 200% of specified value
	Идым Утечка		Within specified value
	The above specifications shall be satisfied when the capacitors are restored to 20°C after the rated voltage applied for 3000 hrs at 105°C
Shelf Life Test	Test Time		1000 шагат
	Йоҥгытшо Вашталт		Within ±20% of initial value
	Энергопотеря Коэффициент		Шагал 150% of specified value
	Идым Утечка		Within specified value
	The above specifications shall be satisfied when the capacitors are restored to 20°C after exposing them for 1000 hrs at 105°C without voltage applied.
Ripple Current & Frequency Multipliers	WV (Вуйсавырныш) Freq (Гц)		50/60		120		300			1K			10K up
	Multiplier		0.8		1.0		1.1			1.3			1.4
Ripple Current & Temperature Multipliers	Temperature (°C)		40	60		70	85		105
	Multiplier		2.5	2.2		2.0	1.8		1.0
Standards	Satisfies Characteristics W of JIS C 5141

SNAP-IN TERMINAL TYPE

PART NUMBER EXAMPLE

Ойыртем
◆ Has a snap-in terminal which can solder to PCB directly and need not fixture to save processing time.

◆ Suitable for electronic equipment with medium-high voltage circuits. Printed circuit board terminal snap-in type and lug terminal type available.

◆ 3,000 Hour Life

Snap-In Electrolytic Capacitors ▏105℃ 3,000Hrs ▏CAVB