General Electrolytic Capacitors ▏85 ℃2,000~3,000Hrs ▏CAFB

Ойыртем
85℃, 2000hrs for Dia < 8мо, 3000hrs Dia > 10мо
Standard series for general purpose
Replaces RC, RE & RH Series

Datasheet-For-General-Electrolytic-Capacitors-▏85-℃20003000Hrs-▏CAFB.pdf (763 загрузка)

Спецификация

Item	Performance
Operating Temp.	-40°C ~ +85°C
Правам Тема	± 20% (120Гц, 20°C)
Идым Утечка (at 20°C)	Номинальный Напряжений	< 100Вуйсавырныш									>100Вуйсавырныш
	Time	Деч вара 2 минут									Деч вара 5 минут
	Идым Утечка	I = 0.01CV or 3 (МКА) whichever is greater									CV < 1000 I = 0.03CV + 15(МКА)										CV > 1000 I = 0.02CV + 25(МКА)
	Where C = rated capacitance in F. V = rated DC working volatage in V.
	Номинальный Напряжений	6.3	10		16		25			35		50		63			100		160		200		250		350		400		450
Dissipation Factor Tanδ at 120Hz, 20°C	Tan δ (max)	0.23	0.20		0.16		0.14			0.12		0.10		0.09			0.08		0.12		0.14		0.17		0.20		0.25		0.25
	When the capacitance exceeds 1000μF, 0.02 shall be added for every 1000μF increase.
Low Temperature Characteristics (at 120Hz)	Impedance ratio shall not exceed the values given in the table below.
	Номинальный Напряжений					6.3			10		16	25	35		50			63	100	160		200		250		350		400	550
	Impedance Radio	Z(-25°C)		φD<16		6			4		3	3	2		2			2	2	3		6		8		12		14	16
		/Z(+20°C)		φD>16		8			6		4	4	3		3			3	3
		Z(-40°C)		φD<16		10			8		6	6	4		3			3	3	4		8		10		10		10	10
		/Z(+20°C)		φD>16		18			16		12	10	8		8			6	6
Load Life test at 20°C (after rated voltage is applied at 85°C for 2000	Test Time	2000hrs(3000hrs for φ D > 10мо)									Shelf Life at 20°C after exposure to 85 for 1000 hours with					Test Time						1000hrs
	Йоҥгытшо Вашталт	Within < ±20% of initial value														Йоҥгытшо Вашталт						Within < ±20% of initial value
	Энергопотеря Коэффициент	Шагал 200% of specific value														Энергопотеря Коэффициент						Шагал 200% of specific value
/ 3000 шагат)	Идым Утечка	Within specified value									no voltage					Идым Утечка						Within specified value
Ripple Current & Frequency Multipliers	Freq. (Гц) Cap. (МКФ)	60 (50)		120				500				1K			10K up
	Under 100	0.70		1.00				1.30				1.40			1.50
	100 вуйсавырныш 1000	0.75		1.00				1.20				1.30			1.35
	1000 and above	0.80		1.00				1.10				1.12			1.15
Ripple Current & Temperature Multipliers	Temperature (°C)	Under 50		70				85
	Mutipliers	1.78		1.4				1.00
Standards	Satisfies Characteristic W of JIS C 5141

DIMENSION & PERMISSIBLE RIPPLE CURRENT

Ripple Current :mA/rms at 120Hz, 85°C

V.DC µ F Code		6.3Вуйсавырныш (OJ)		10Вуйсавырныш (1А)		16Вуйсавырныш (1С)		25Вуйсавырныш (1E)		35Вуйсавырныш (1Вуйсавырныш)		50Вуйсавырныш (1H)		63Вуйсавырныш (1J)		100Вуйсавырныш (2А)
V.DC µ F Code		ΦD x L	mA	ΦD xL	mA	ΦD x L	mA	ΦD x L	mA	ΦD x L	mA	ΦD x L	mA	ΦD x L	mA	ΦD x L	mA
0.1	0R1											5 x 11	1.5	5 x 11	3	5 x 11	3
0.2	R22											5 x 11	3.5	5 x 11	5	5 x 11	5.8
0.3	R33											5 x 11	5	5 x 11	8	5 x 11	8.8
0.5	R47											5 x 11	7	5 x 11	10	5 x 11	12
1.0	10											5 x 11	15	5 x 11	17	5 x 11	22
2.2	2R2											5 x 11	29	5 x 11	28	5 x 11	33
3.3	3R3											5 x 11	35	5 x 11	34	5 x 11	40
4.7	4R7							5 x 11	31	5 x 11	40	5 x 11	42	5 x 11	45	5 x 11	48
10	100					5 x 11	49	5 x 11	54	5 x 11	58	5 x 11	65	5 x 11	70	5 x 11 6.3 x 11	59 80
22	220			5 x 11	70	5 x 11	75	5 x 11	80	5 x 11	87	5 x 11	95	6.3 x 11	115	6.3 x 11 8 x 11.5	115 135
33	330	5 x 11	72	5 x 11	84	5 x 11	90	5 x 11	97	5 x 11 6.3 x 11	108 115	5 x 11 6.3 x 11	136 163	6.3 x 11 8 x 11.5	140 340	8 x 11.5 10 x 16	145 195
47	470	5 x 11	90	5 x 11	100	5 x 11	110	5 x 11	115	5 x 11 6.3 x 11	130 145	6.3 x 11	165	6.3 x 11 8 x 11.5	170 397	10 x 13 10 x 16	235 255

DIMENSION & PERMISSIBLE RIPPLE CURRENT

Ripple Current :mA/rms at 120Hz, 85°C

* = Flat (non-vented) rubber bung.

Other units are made with raised (vented) rubber bung

PART NUMBER EXAMPLE

CAFB 471 M 1С BK 100 125

LEAD SPACING AND DIAMETER

φD	5	6.3	8	10	13	16	18	22	25
P	2.0	2.5	3.5	5.0	5.0	7.5	7.5	10	12.5
φd	0.5		0.6			0.8		1.0
α	1.0			1.5				2.0
β	0.5

HOW TO MAKE А PART NUMBER

Series:CAFB

Теммаш: Rated capacitance in µF is represented by a three digit number. The first two digits are the significant figures of the nominalcapacitance and the third digit indicates the number of zeros following these The decimal point is represented by the capital letter R. Please refer to the following example.

МКФ 0.1 0.47 1 4.7 10 47 100 470 1000 4700 10000

Part Number 0R1 R47 010 4R7 100 470 101 471 102 472 103
Tolerance: (20% ISTypical)

Code K M T W

Tolerance + 10% + 20% + 50% /-10% + 100% /-10%
Номинальный Напряжений: Voltage in volts (Вуйсавырныш) is represented by a two digit code showing the rated working voltage indicated asfollows:

Напряжений (WV) 6.3 10 16 25 35 40 50 63 80 100 160 200 250 350 400 450

Code 0J 1А 1С 1E 1Вуйсавырныш 1G 1H 1J 1K 2А 2С 2Д 2E 2Вуйсавырныш 2G 2W

Lead Forming &Package

Code	Lead Description	Packaging
BC	Bending Cut	Bulk Packing
BK	Straight Lead	Bulk Packing
CC	Lead Cutting	Bulk Packing
FC	Lead Forming & Cutting	Bulk Packing
FF	Lead Forming	Bulk Packing
SC	Snap-in & Cutting	Bulk Packing
SD	Cathode Lead Beading	Bulk Packing
SF	Snap-in, Forming & Cutting	Bulk Packing
SA	Straight Lead	Tape & Ammo
TA	Lead Forming	Tape & Ammo
SR	Straight Lead	Tape & Reel
TR	Lead Forming	Tape & Reel

CanSize

Diameter (мо)x10 & Length (мо)x10. Can Size 063110, represents 6.3mm diameter by 11mm length.

Wire and SleeveType*

= (Omit) Lead (Pb) Free Wire & PVC Sleeve

`P = Lead (Pb) Free Wire & PET Sleeve

*Note: All standard RFE Aluminum Electrolytic Capacitors are Lead (Pb) free and RoHS compliant. PET sleeve is available for those companies

that also require PVC free product.

LEADED TAPING & PACKAGING SPECIFICATIONS

Taping Specification for Radial Lead Type

Packing	TA,TR (Fig. 1)								SA, SR (Fig. 2, 3, 4)
L	L ≤ 7mm					L ≥ 7mm			L ≤ 7mm					L ≥ 7mm
fD Symbol	f 3	f 4	f 5	f6.3	f 8	f 5	f 6.3	f 8	f 3	f 4	f 5	f 6.3	f 8	f 5	f 6.3	f 8	Tol.	f 10	f 13	Tol.
fd	0.4	0.45	0.5	0.5	0.5	0.5	0.5	0.6	0.4	0.45	0.45	0.45	0.45	0.5	0.5	0.6	± 0.05	0.6	0.6	± 0.05
F	5.0	5.0	5.0	5.0	5.0	5.0	5.0	5.0	2.5	2.5	2.5	2.5	3.5	2.5	2.5	3.5	-0.2/+0.8	5.0	5.0	-0.2/+0.8
P	12.7	12.7	12.7	12.7	12.7	12.7	12.7	12.7	12.7	12.7	12.7	12.7	12.7	12.7	12.7	12.7	± 1.0	12.7	25.4	± 1.0
P0	12.7	12.7	12.7	12.7	12.7	12.7	12.7	12.7	12.7	12.7	12.7	12.7	12.7	12.7	12.7	12.7	± 0.2	12.7	12.7	± 0.30
P2	6.35	6.35	6.35	6.35	6.35	6.35	6.35	6.35	6.35	6.35	6.35	6.35	6.35	6.35	6.35	6.35	± 1.0	6.35	6.35	± 1.3
P1	3.85	3.85	3.85	3.85	3.85	3.85	3.85	3.85	5.1	5.1	5.1	5.1	4.6	5.1	5.1	4.6	± 0.5	3.85	3.85	± 0.7
H	17.5	17.5	17.5	17.5	17.5	18.5	18.5	20.0	17.5	17.5	17.5	17.5	17.5	18.5	18.5	18.5	± 0.75	18.5	18.5	± 0.75
H0	16.0	16.0	16.0	16.0	16.0	16.0	16.0	16.0	—	—	—	—	—	—	—	—	± 0.5	—	—	± 0.5
W	18.0	18.0	18.0	18.0	18.0	18.0	18.0	18.0	18.0	18.0	18.0	18.0	18.0	18.0	18.0	18.0	± 0.5	18.0	18.0	± 0.5
W0	12.0	12.0	12.0	12.0	12.0	12.0	12.0	12.0	12.0	12.0	12.0	12.0	12.0	12.0	12.0	12.0	Min	12.0	12.0	Min.
W1	9.0	9.0	9.0	9.0	9.0	9.0	9.0	9.0	9.0	9.0	9.0	9.0	9.0	9.0	9.0	9.0	± 0.5	9.0	9.0	± 0.5
W2	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	Max.	1.5	1.5	Max.
f D0	4.0	4.0	4.0	4.0	4.0	4.0	4.0	4.0	4.0	4.0	4.0	4.0	4.0	4.0	4.0	4.0	± 0.2	4.0	4.0	± 0.2
Т	0.7	0.7	0.7	0.7	0.7	0.7	0.7	0.7	0.7	0.7	0.7	0.7	0.7	0.7	0.7	0.7	± 0.2	0.7	0.7	± 0.2
H	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	± 1.0	0	0	± 1.0
l	1.0	1.0	1.0	1.0	1.0	1.0	1.0	1.0	1.0	1.0	1.0	1.0	1.0	1.0	1.0	1.0	Max.	1.0	1.0	Max.
А	11	11	11	11	11	11	11	11	11	11	11	11	11	11	11	11	Max.	11	11	Max.
Fig. No.	1	1	1	1	1	1	1	1	2	2	2	3	3	2	3	3		3	3,4

Packaging Quantity

Д	3	4	5	6.3	8	10	13
TA, SA	3000	2000	2000	2000	1000	500	250
TR,SR	3000	1500	1200	1000	800	500	500

NOTES:

The above quantities are typical. Quantities may
The component will be oriented on the tape so that the positive lead is leading or the negative lead is leading, depending on the customer’srequest

Ойыртем
◆ 2000hrs(3000hrs for φ D > 10мо) assured
◆  SlimType

◆ Rohs Compliant

МКФ	0.1	0.47	1	4.7	10	47	100	470	1000	4700	10000
Part Number	0R1	R47	010	4R7	100	470	101	471	102	472	103

Code	K	M	T	W
Tolerance	+ 10%	+ 20%	+ 50% /-10%	+ 100% /-10%

General Electrolytic Capacitors ▏85 ℃2,000~3,000Hrs ▏CAFB