Wielowarstwowy kondensator ceramiczny MIL MLCC CCAE
Square, without outer sealing layer, suitable for surface mounting;
The medium is Class I ceramic, with good frequency characteristics and high capacitance stability;
Each batch of products undergoes 100% temperature shock screening and high-temperature electrical load screening;
Suitable for resonant circuits, coupling circuits, and circuits that require low loss, high capacitance stability, and high insulation resistance in various military electronic devices.
The medium is Class I ceramic, with good frequency characteristics and high capacitance stability;
Each batch of products undergoes 100% temperature shock screening and high-temperature electrical load screening;
Suitable for resonant circuits, coupling circuits, and circuits that require low loss, high capacitance stability, and high insulation resistance in various military electronic devices.
Ordering Example
| CCAE 0805 CG 101 jot 1h Z | jot | ||||||
|
Seria |
External
dimensions |
Temperatura
coefficient |
pojemność |
Tolerancja |
Oceniono
Napięcie |
Terminal
electrode |
Quality Grade |
|
SMD MLCC |
According to the table below |
CG:0±30ppm/℃ CH:0±60ppm/℃ -55~+125℃ |
Numerical method, 101 is 100pF |
According to the table below |
standard method 50V |
Basic metallization
– metal shielding layer – tin (tin/lead alloy containing at least 3% prowadzić) |
According to the table below |
- Comparison Table of Quality Levels and Execution Standard
-
Quality Grade
Quality grade code
Implement detailed specifications
Refer to the general standard for execution
Seven specialties plus
G+
QJ/PWV411-2012
QZJ840624 Ceramic Capacitor “Seven Specialized” Technical Conditions Seven specialties
sol
QJ/PWV415-2012
QZJ840624 Ceramic Capacitor “Seven Specialized” Technical Conditions Military screening S QJ/PWV401-2010 GJB192A-1998 General military jot QJ/PWV419-2012 GJB192A-1998
| Temperature coefficient code | Nominal temperature coefficient | Working temperature range |
| CG | 0±30 ppm/℃ | -55℃ ~ + 125 ℃ |
| CH | 0 ± 60 ppm/℃ |
|
Kod rozmiaru |
Dimensions mm | ||||
| L | W | Tmax |  |
||
| 0402 | 1.00±0.15 | 0.50±0,05 | 0.55 | ||
| 0603 | 1.60±0.15 | 0.80±0.15 | 0.95 | ||
| 0805 | 2.00±0.20 | 1.25±0.20 | 1.40 | ||
| 1206 | 3.20±0.20 | 1.60±0.20 | 1.90 | ||
| 1210 | 3.20±0.40 | 2.50±0.30 | 2.80 | ||
| 1812 | 4.50±0.50 | 3.20±0.40 | 3.50 | ||
| 2220 | 5.70±0.50 | 5.00±0.50 | 5.20 | ||
| 2225 | 5.70±0.50 | 6.30±0.50 | 6.20 | ||
| Temperature coefficient code | Nominal temperature coefficient | Working temperature range |
| CG | 0±30 ppm/℃ | -55℃ ~ + 125 ℃ |
| CH | 0 ± 60 ppm/℃ |
Temperature coefficient
| Temperature coefficient code | Nominal temperature coefficient | Working temperature range |
| CG | 0±30 ppm/℃ | -55℃ ~ + 125 ℃ |
| CH | 0 ± 60 ppm/℃ |
- Allowabledeviationof capacitance
| Nominal capacitance range | Allowable deviation range | kod |
| 0.1 pF~0.9 pF | ±0.10pF、± 0,25 pF、±0.50pF | b、do、re |
|
1.0 pF~8.2 pF |
±0.10pF、±0.25Pf
±0.50pF、±1% |
b、do、re、fa |
|
CR≥10pF |
±1% / ±2% | F/G |
| ± 5% | jot | |
| ± 10% | K. |
| Przedmiot | Test conditions | performance index |
| Capacity CR | Test frequency: CR ≤1000pF, 1MHz ± 10%;
CR > 1000pF, 1KHz ± 10% Test voltage:1.0V ± 0.2Vrms |
When CR ≥ 50pF, tg δ≤ 15×10−4
When CR < 50pF, tg δ≤1.5x(150/CR+7)x10−4 |
| Tangent of the loss Angle Tg δ | ||
|
Insulation resistance IR |
Test voltage: rated voltage UR; Czas na test: 1min±5s | IR ≥ 1×105 MΩ or 1000 · μ F,
co jest mniejsze |
| Voltage endurance | Test voltage: 2.5UR; Czas na test: 5s±1s | No breakdown, arcing or visible damage |
inquiry 
inquiry@sh-jinpei.com 
