Kovinsko kondenzator za poliestrski film | ESR zmanjšana | SADC
Serija CDAA je izdelana s poliestrskim filmskim dielektrikom, elektroda iz aluminijaste folije, bakren svinec, in premaz iz epoksidne smole. Primerne so za blokiranje, by-pass in povezava DC in signala z VHF območjem, časovna vezja,filtriranje, in drugo splošno uporabo.
Idealni so tudi za uporabo v ojačevalnikih, TV, radio, stereo oprema in druga elektronska oprema.
LASTNOSTI
◆ Visoka odpornost na vlago
◆ Enostranski izhod
◆ Dobra izolacijska zmogljivost
◆ ESR je zmanjšan
◆ Nazivna napetost 100~1200Vdc
PRIMER ŠTEVILKE DELA
ELEKTRIČNE ZNAČILNOSTI
| Predmeti | Izvedba |
| Območje delovne napetosti | 100Vdc, 250Vdc, 400Vdc, 630Vdc, 1200Vdc |
| Nazivna temperatura | -55˚C ~ +105˚C (Derate nad 85˚C) |
| Klimatska kategorija | 55 / 105 / 21 |
| kapacitivnost Območje | 0.001 µF ~ 0.27 μF |
| kapacitivnost Toleranca | 5% (J), 10% (K), 20%(M) |
| dissipation Factor | ≤ 1.0% (1KHz, 20° C) |
| Izolacijska upornost
Od terminala do terminala |
≥ 30000 MΩ, CR ≤ 0,1 μF (20° C, 10V, 1min)
≥ 10000 MΩ, CR > 0.1μF (20° C, 100V, 1min) |
| Vzdrži napetost | 2.0UR : (5s) |
SPAJANJE
Območje pod krivuljo je priporočeni čas spajkanja & temp. za prikazane materiale.
| (μF) | W.V. DC | 50V (1H) / 63V (1J) / 100V (2A) | 250V (2E) | 400V (2G) | ||||||||||||
| Koda | W | H | T | P | d | W | H | T | P | d | W | H | T | P | d | |
| 0.001 | 102 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 |
| 0.0012 | 122 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 |
| 0.0015 | 152 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 |
| 0.0018 | 182 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 | 6.0 | 11.5 | 3.5 | 3.5 | 0.5 |
| 0.0022 | 222 | 6.0 | 11.5 | 4.0 | 3.5 | 0.5 | 6.0 | 11.5 | 4.0 | 3.5 | 0.5 | 6.0 | 11.5 | 4.0 | 3.5 | 0.5 |
| 0.0027 | 272 | 6.0 | 11.5 | 4.0 | 3.5 | 0.5 | 6.5 | 12.0 | 4.0 | 3.5 | 0.5 | 7.0 | 13.0 | 4.0 | 4.0 | 0.5 |
| 0.0033 | 332 | 6.0 | 11.5 | 4.0 | 3.5 | 0.5 | 6.5 | 12.0 | 4.0 | 3.5 | 0.5 | 7.0 | 13.0 | 4.5 | 4.5 | 0.5 |
| 0.0039 | 392 | 6.0 | 11.5 | 4.0 | 3.5 | 0.5 | 6.5 | 12.0 | 4.0 | 4.0 | 0.5 | 7.5 | 13.5 | 4.5 | 4.5 | 0.5 |
| 0.0047 | 472 | 6.0 | 11.5 | 4.0 | 3.5 | 0.5 | 6.5 | 12.0 | 4.0 | 4.5 | 0.5 | 8.0 | 13.5 | 4.5 | 4.5 | 0.5 |
| 0.0056 | 562 | 6.0 | 11.5 | 4.0 | 4.0 | 0.5 | 7.0 | 12.0 | 4.0 | 5.0 | 0.5 | 8.0 | 13.5 | 5.0 | 5.5 | 0.5 |
| 0.0068 | 682 | 6.5 | 11.5 | 4.0 | 4.0 | 0.5 | 7.0 | 12.0 | 4.0 | 5.0 | 0.5 | 8.5 | 13.5 | 5.5 | 5.5 | 0.5 |
| 0.0082 | 822 | 7.0 | 11.5 | 4.0 | 4.0 | 0.5 | 8.0 | 13.0 | 4.0 | 5.5 | 0.5 | 9.0 | 15.5 | 5.5 | 5.5 | 0.5 |
| 0.01 | 103 | 7.0 | 11.5 | 4.5 | 4.0 | 0.5 | 8.0 | 13.0 | 5.0 | 5.5 | 0.5 | 9.5 | 15.5 | 6.0 | 5.5 | 0.5 |
| 0.012 | 123 | 7.0 | 11.5 | 4.5 | 4.0 | 0.5 | 8.5 | 13.5 | 5.0 | 5.5 | 0.5 | 10.5 | 15.5 | 6.5 | 6.0 | 0.5 |
| 0.015 | 153 | 7.0 | 11.5 | 4.5 | 4.5 | 0.5 | 8.5 | 13.5 | 5.0 | 5.5 | 0.5 | 10.5 | 15.5 | 6.5 | 6.5 | 0.5 |
| 0.018 | 183 | 7.0 | 12.0 | 4.5 | 4.5 | 0.5 | 9.0 | 14.0 | 6.0 | 6.0 | 0.5 | 11.5 | 17.5 | 7.0 | 7.0 | 0.5 |
| 0.022 | 223 | 8.0 | 12.0 | 4.5 | 5.0 | 0.5 | 9.5 | 14.0 | 6.0 | 6.5 | 0.5 | 11.5 | 17.5 | 7.0 | 7.0 | 0.5 |
| 0.027 | 273 | 8.0 | 13.0 | 5.0 | 5.0 | 0.5 | 10.0 | 15.0 | 6.5 | 6.5 | 0.5 | 12.5 | 18.5 | 7.5 | 7.5 | 0.5 |
| 0.033 | 333 | 8.5 | 13.0 | 5.0 | 5.5 | 0.5 | 10.5 | 15.5 | 6.5 | 6.5 | 0.5 | 12.5 | 18.5 | 7.5 | 7.5 | 0.5 |
| 0.039 | 393 | 9.0 | 13.0 | 5.0 | 5.5 | 0.5 | 11.5 | 15.5 | 7.0 | 7.0 | 0.5 | 14.0 | 19.0 | 8.0 | 8.5 | 0.5 |
| 0.047 | 473 | 9.0 | 13.0 | 5.5 | 5.5 | 0.5 | 11.5 | 16.0 | 7.0 | 7.5 | 0.5 | 14.5 | 19.0 | 8.5 | 9.0 | 0.5 |
| 0.056 | 563 | 9.5 | 13.5 | 5.5 | 6.5 | 0.5 | 12.5 | 16.0 | 8.5 | 8.0 | 0.5 | 14.5 | 21.5 | 8.5 | 9.0 | 0.5 |
| 0.068 | 683 | 10.0 | 13.5 | 6.0 | 7.0 | 0.5 | 12.5 | 17.0 | 8.5 | 8.0 | 0.5 | 14.5 | 22.5 | 9.0 | 9.5 | 0.5 |
| 0.082 | 823 | 10.5 | 13.5 | 6.5 | 7.0 | 0.5 | 14.0 | 19.0 | 10.0 | 8.5 | 0.5 | |||||
| 0.1 | 104 | 11.5 | 13.5 | 7.0 | 7.5 | 0.5 | 15.0 | 19.0 | 10.0 | 9.0 | 0.5 | |||||
| 0.12 | 124 | 12.5 | 15.5 | 7.5 | 8.5 | 0.5 | ||||||||||
| 0.15 | 154 | 13.5 | 16.0 | 8.0 | 9.0 | 0.5 | ||||||||||
| 0.18 | 184 | 14.0 | 16.5 | 8.0 | 9.5 | 0.5 | ||||||||||
| 0.22 | 224 | 14.5 | 17.5 | 8.5 | 9.5 | 0.5 | ||||||||||
| 0.27 | 274 | 15.0 | 21.0 | 9.0 | 10.0 | 0.5 | ||||||||||
| (μF) | W.V. DC | 630VDC (2J) | 1200VDC (3B) | ||||||||
| Koda | W | H | T | P | d | W | H | T | P | d | |
| 0.001 | 102 | 6.5 | 12.5 | 4.0 | 3.5 | 0.5 | 7.0 | 13.5 | 4.5 | 4.0 | 0.5 |
| 0.0012 | 122 | 6.5 | 12.5 | 4.0 | 3.5 | 0.5 | 7.0 | 13.5 | 4.5 | 4.0 | 0.5 |
| 0.0015 | 152 | 6.5 | 12.5 | 4.0 | 3.5 | 0.5 | 7.5 | 13.5 | 4.5 | 4.5 | 0.5 |
| 0.0018 | 182 | 6.5 | 12.5 | 4.0 | 3.5 | 0.5 | 7.5 | 13.5 | 4.5 | 4.5 | 0.5 |
| 0.0022 | 222 | 7.0 | 12.5 | 4.5 | 4.5 | 0.5 | 8.0 | 14.0 | 5.0 | 5.0 | 0.5 |
| 0.0027 | 272 | 7.5 | 13.5 | 5.0 | 4.5 | 0.5 | 8.0 | 14.0 | 5.5 | 5.0 | 0.5 |
| 0.0033 | 332 | 7.5 | 13.5 | 5.0 | 4.5 | 0.5 | 9.0 | 14.0 | 6.0 | 5.5 | 0.5 |
| 0.0039 | 392 | 8.0 | 13.5 | 5.5 | 5.0 | 0.5 | 9.5 | 15.0 | 6.0 | 6.0 | 0.5 |
| 0.0047 | 472 | 8.5 | 13.5 | 5.5 | 5.0 | 0.5 | 9.5 | 16.0 | 6.0 | 6.0 | 0.5 |
| 0.0056 | 562 | 9.5 | 14.0 | 5.5 | 5.5 | 0.5 | 10.0 | 16.5 | 6.5 | 6.0 | 0.5 |
| 0.0068 | 682 | 10.0 | 14.0 | 6.0 | 6.0 | 0.5 | 10.5 | 16.5 | 6.5 | 6.5 | 0.5 |
| 0.0082 | 822 | 10.0 | 16.0 | 6.0 | 6.0 | 0.5 | 11.5 | 17.5 | 7.5 | 7.5 | 0.5 |
| 0.01 | 103 | 10.0 | 16.0 | 6.5 | 6.0 | 0.5 | 12.0 | 17.5 | 7.5 | 7.5 | 0.5 |
| 0.012 | 123 | 11.0 | 16.5 | 6.5 | 7.0 | 0.5 | |||||
| 0.015 | 153 | 11.5 | 17.0 | 7.0 | 7.5 | 0.5 | |||||
| 0.018 | 183 | 12.0 | 17.5 | 7.5 | 7.5 | 0.5 | |||||
| 0.022 | 223 | 12.5 | 18.0 | 7.5 | 8.0 | 0.5 | |||||
IZVEDBA
| Artikel | Testna Metode | Zahteve |
|
Odpornost na toploto spajkanja |
Spajkalna kopel: 260°C± 5°C Čas potopitve: 10s ± 1 s |
Sprememba kapacitivnosti ∆C/C ≤ 5% DF Sprememba ∆ tanδ ≤ 1% pri 1KHz IR
≥ 50% spec. vrednost |
|
Odpornost proti vibracijam |
Frekvenčni razpon: 10 ~ 500Hz amplituda: 0.75m/m Trajanje: 6 ure | Ne sme biti vidnih poškodb brez občasnih stikov,
Brez odprtega ali kratkega stika |
|
Vlažna toplota, Stanje dinamičnega ravnovesja |
Temperatura: 55° C
Relativna vlažnost: 90% do 95% Trajanje: 21 Dnevi |
Sprememba kapacitivnosti ∆C/C ≤ 5%
DF Sprememba ∆ tanδ ≤ 1% pri 1KHz IR ≥ 50% spec. vrednost |
|
Električna vzdržljivost |
Temperatura: 105° C
Uporabljena napetost: 1.25 x Vr (DC) Trajanje: 1,000 ure |
Sprememba kapacitivnosti ∆C/C ≤ 1% DF Sprememba ∆ tanδ ≤ 1% pri 1KHz IR
≥ 50% spec. vrednost |
KODA KAPACITETNOSTI
| μF | 0.001 | 0.0047 | 0.01 | 0.047 | 0.1 | 0.27 |
| pF | 1000 | 4700 | 10000 | 47000 | 100000 | 270000 |
| Koda | 102 | 472 | 103 | 473 | 104 | 274 |
Nazivna napetost
| W V | 100 | 250 | 400 | 630 | 1200 |
| Koda | 2A | 2E | 2G | 2J | 3B |
RADIALNI RAZMED VODOV
*Leadspace je ravne svinčeve neoblikovane originalni vodilni prostor.
| Vodja S | tempo | 5.0mm | 7.5mm | 10mm |
| Koda | 050 | 075 | 100 | |
KODA TRAKU (Razmik med vodilom traku)
*glej diagram na strani 4
| Razmik med vodilom | 5.0mm | 7.5mm | 10mm |
| Pakiranje s trakom | A | A | A |
| Koda | RT1 | RT2 | RT3 |
DOLŽINA PREVODA OD SEDEŽNE RAVNINE
(Paket v razsutem stanju)
| mm | 5 | 10 | 15 | 20 |
| Koda | 50 | 100 | 150 | 250 |
TOLERANCA
| Koda | Toleranca |
| J | ± 5% |
| K | ± 10% |
| M | ± 20% |
PRIMERI SVINČENJA
DIAGRAM KODE ZA RADIALNI TAP
SPECIFIKACIJE
| Opis |
pismo |
razsežnost (mm) | |||
| RT1 | RT2 | RT3 | Cestnina. | ||
| Premer svinčene žice | d | 0.5 / 0.6 | 0.5 / 0.6 | 0.6 | + 0.05 |
| Nagib traku | P | 12.7 | 12.7 | 12.7 | + 1 |
| Nagib dovodne luknje | PO | 12.7 | 12.7 | 12.7 | + 0.2 |
| Centriranje vodilne žice | P1 | 3.85 | 2.6 / 3.75 | 7.7 | + 0.7 |
| Centriranje telesa | P2 | 6.35 | 6.35 | 12.7 | + 1.3 |
| Razmik med vodilom (Višina tona) | F | 5 | 7.5 | 10 | + 0.6; -0.1 |
| Poravnava komponent | ∆h | 0 | 0 | 0 | + 2 |
| Višina Componenet iz Tape Center | H | 18.5 | 18.5 | 18.5 | + 0.5 |
| Širina nosilnega traku | W | 18 | 18 | 18 | + 1; -0.5 |
| Pridržite širino traku | KJE | 6 | 6 | 9 | Min |
| Položaj luknje | W1 | 9 | 9 | 9 | + 0.5 |
| Pridržite položaj traku | W2 | 3 | 3 | 3 | Max |
| Premer dovodne luknje | Naredi | 4 | 4 | 4 | + 0.2 |
| Debelina traku | t | 0.7 | 0.5 | 0.5 | + 0.2 |
| Slika | sl | 1 ali 2 | 1.2 ali 3 | 4 | |
Opomba: *Dopust skupnega naklona manj kot 1 mm pri vsoti 20 smole.
*Neprekinjena prazna komponenta manj kot 3 zaporednih kosov.
*Skupno prazno na enem kolutu manj kot 1%.
inquiry 
inquiry@sh-jinpei.com 
