Vodivi polimerni čip tantal kondenzatori SMD ▏CBAC
◆Epoxy molded encapsulation, Čip, Jednostavan za integraciju, Polarizirano
◆Extremely low ESR , Volumetrijski učinkovit , Stabilna u električnom energiji & Izvedbe skladištenja , Dug život- raspon, Visoka pouzdanost
◆Typical applications include DC/DC converters , prijenosna računala , prijenosna elektronika , telekomunikacija (mobilni telefon i bazna stanica ), prikazuje ,SSD,HDD and USB
◆Operative Standard: QJ/PWV517-2013.
Dimenzija – MILLIMETERS
| Veličina kućišta | L | W1 | H | W2 | S | |
| A | 1206 | 3216 | 3.2±0,2 | 1.6±0,2 | 1.6±0,2 | 0.8±0,2 | 1.2±0,2 |
| B | 1210 | 3225 | 3.5±0,2 | 2.8±0,2 | 1.9±0,2 | 0.8±0,2 | 2.2±0,2 |
| C | 2312 | 6032 | 6.0±0,2 | 3.2±0,2 | 2.5±0,2 | 1.3±0,2 | 2.2±0,2 |
| H | 2917 | 7343 | 7.3±0,2 | 4.3±0,2 | 2.0±0,2 | 1.3±0,2 | 2.4±0,2 |
| D | 2917 | 7343 | 7.3±0,2 | 4.3±0,2 | 2.8±0,2 | 1.3±0,2 | 2.4±0,2 |
| E | 2917 | 7343 | 7.3±0,4 | 4.3±0,4 | 4.1±0,4 | 1.3±0,2 | 2.4±0,2 |
| V | 2924 | 7361 | 7.3±0,4 | 6.1±0,4 | 3.6±0,4 | 1.35±0,2 | 3.0±0,2 |
| W | 2924 | 7361 | 7.3±0,4 | 6.1±0,4 | 4.1±0,4 | 1.35±0,2 | 3.0±0,2 |
Primjer broja dijela
Soldering Process
Jinpei tantalum capacitors are compatible with wave (single or dual), convection, I, or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress.
Suntan’s recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J CBAC standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions.
Hand soldering should be performed with care due to the difficulty in process control. If performed, care should be taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow occurs. Once reflow occurs, the iron should be removed immediately. “Wiping” the edges of a chip and heating the top surface is not recommended.
During typical reflow operations, a slight darkening of the gold- colored epoxy may be observed. This slight darkening is normal and not harmful to the product. Marking permanency is not affected by this change.
Bilješka: Specifikacije se podliježu promjenama bez prethodne najave. Za više detalja i ažuriranja, Posjetite našu web stranicu.
Značajke
⚫ Epoxy molded encapsulation, Čip, Jednostavan za integraciju, Polarizirano
⚫ Extremely low ESR , Volumetrijski učinkovit , Stabilna u električnom energiji & storage performances, Dugi životni vijek,Visoka pouzdanost
⚫ Typical applications include DC/DC converters, prijenosna računala, prijenosna elektronika, telekomunikacija
(mobilni telefon i bazna stanica ), prikazuje,SSD,HDDand USB
⚫ Operative Standard: QJ/PWV517-2013.
⚫ RoHS usklađen
