Metalni polipropilenski kondenzator filma | Double | CDBB

Ti si ovdje:

Dom
kondenzatori
film kondenzatora
Metalni polipropilenski kondenzator filma
Metalni polipropilenski kondenzator filma |…

Metalni polipropilenski kondenzator filma | Double | CDBB

KARAKTERISTIKE

◆ Visoka otpornost na vlagu
◆ Nazivni napon : 250~2000Vdc (180~700Vac)
◆ Raspon kapacitivnosti : 0.00022 ~3.9 uF
◆Epoksidna smola otporna na plamen (U skladu sa UL 94V-0)
◆ Završeci bez olova, usklađeni sa RoHS
Za visoke dv/dt aplikacije

Datasheet-For-Metalized-Polypropylene-Film-Capacitor-Double-CDBB.pdf (1014 preuzimanja)

KARAKTERISTIKE

◆ Visoka otpornost na vlagu
Nazivni napon : 250~2000Vdc(180~700Vac)
Range Raspon kapaciteta : 0.00022 ~3.9uF
◆ Epoksidna smola otporna na plamen (U skladu sa UL 94V-0)
◆ RoHS usklađen i bez olova
◆ Za visoke dv/dt aplikacije

PRIMJER BROJ DIJELA

ELEKTRIČNE KARAKTERISTIKE

Predmeti

Performanse

Raspon radnog napona

250Vdc ~ 2,000Vdc

Nazivna temperatura

-40°C ~ +105°C (Smanjuje temperaturu preko 85°C na 1.25% po °C)

Klimatska kategorija

40 / 105 / 56

kapacitet Range

0.00022 µF ~ 3.9µF

Capacitance Tolerance

± 5% (J), ± 10% (K), ostale tolerancije na zahtjev

rasipanje Factor (tan fiÅ

C ≤0.1μF

0.1μF < C ≤ 1.0μF

C > 1.0μF

1KHz, 20° C

0.0003

0.0003

0.0003

1KHz, 20° C

0.0004

0.0006

—

100KHz, 20° C

0.0015

—

—

Izolacijski otpor

Izmjereno na 20°C, 100Vdc for 1 minutu

Minimalna vrijednost između terminala
Cr ≤ 0.33 μF	IR ≥ 100,000 MΩ
Cr > 0.33 μF	IR ≥ 30,000 MΩ • µF
Minimalna vrijednost između terminala i kućišta
	IR ≥ 30,000 MΩ

RATINGS & DIMENZIJE (mm)
Preporuke za talasno lemljenje

(μF)	Radni g voltaža	250Vdc (2E)						400Vdc (2G)						630Vdc (2J)
	Radni g voltaža	180Vac						250Vac						400Vac
	Kod	W	H	T	P	umreti	dv/dt	W	H	T	P	umreti	dv/dt	W	H	T	P	umreti	dv/dt
0.01	103													13.0	11.0	5.0	10.0	0.6	3,000
0.012	123													13.0	11.0	5.0	10.0	0.6	3,000
0.015	153													13.0	12.0	6.0	10.0	0.6	3,000
0.018	183													18.0	11.0	5.0	15.0	0.8	2,500
0.022	223													18.0	11.0	5.0	15.0	0.8	2,500
0.027	273							13.0	11.0	5.0	10.0	0.6	1,400	18.0	11.0	5.0	15.0	0.8	2,500
0.033	333							13.0	11.0	5.0	10.0	0.6	1,400	18.0	12.0	6.0	15.0	0.8	2,500
0.039	393							13.0	12.0	6.0	10.0	0.6	1,400	18.0	12.0	6.0	15.0	0.8	2,500
0.047	473	13.0	11.0	5.0	10.0	0.6	1,000	18.0	11.0	5.0	15.0	0.8	1,000	18.0	12.0	6.0	15.0	0.8	2,500
0.056	563	13.0	11.0	5.0	10.0	0.6	1,000	18.0	11.0	5.0	15.0	0.8	1,000	26.5	15.0	6.0	22.5	0.8	1,800
0.068	683	13.0	12.0	6.0	10.0	0.6	1,000	18.0	12.0	6.0	15.0	0.8	1,000	26.5	15.0	6.0	22.5	0.8	1,800
0.082	823	18.0	11.0	5.0	15.0	0.8	600	18.0	12.0	6.0	15.0	0.8	1,000	26.5	15.0	6.0	22.5	0.8	1,800
0.1	104	18.0	11.0	5.0	15.0	0.8	600	18.0	13.5	7.5	15.0	0.8	1,000	26.5	15.0	6.0	22.5	0.8	1,800
0.12	124	18.0	12.0	6.0	15.0	0.8	600	18.0	13.5	7.5	15.0	0.8	1,000	26.5	16.0	7.0	22.5	0.8	1,800
0.15	154	18.0	12.0	6.0	15.0	0.8	600	26.5	15.0	6.0	22.5	0.8	600	26.5	17.0	8.5	22.5	0.8	1,800
0.18	184	18.0	13.5	7.5	15.0	0.8	600	26.5	15.0	6.0	22.5	0.8	600	32.0	18.0	9.0	27.5	0.8	1,100
0.22	224	18.0	13.5	7.5	15.0	0.8	600	26.5	16.0	7.0	22.5	0.8	600	32.0	18.0	9.0	27.5	0.8	1,100
0.27	274	18.0	14.5	8.5	15.0	0.8	600	26.5	17.0	8.5	22.5	0.8	600	32.0	18.0	9.0	27.5	0.8	1,100
0.33	334	18.0	16.0	10.0	15.0	0.8	600	26.5	17.0	8.5	22.5	0.8	600	32.0	20.0	11.0	27.5	0.8	1,100
0.39	394	26.5	16.0	7.0	22.5	0.8	400	26.5	18.5	10.0	22.5	0.8	600	32.0	20.0	11.0	27.5	0.8	1,100
0.47	474	26.5	16.0	7.0	22.5	0.8	400	32.0	18.0	9.0	27.5	0.8	500	32.0	22.0	13.0	27.5	0.8	1,100
0.56	564	26.5	17.0	8.5	22.5	0.8	400	32.0	20.0	11.0	27.5	0.8	500	32.0	22.0	13.0	27.5	0.8	1,100
0.68	684	26.5	18.5	10.0	22.5	0.8	400	32.0	20.0	11.0	27.5	0.8	500	32.0	24.5	15.0	27.5	0.8	1,100
0.82	824	26.5	18.5	10.0	22.5	0.8	400	32.0	22.0	13.0	27.5	0.8	500	32.0	28.0	14.0	27.5	0.8	1,100
1	105	32.0	20.0	11.0	27.5	0.8	300	32.0	24.5	15.0	27.5	0.8	500	32.0	33.0	18.0	27.5	0.8	1,100
1.2	125	32.0	20.0	11.0	27.5	0.8	300	32.0	24.5	15.0	27.5	0.8	500	32.0	33.0	18.0	27.5	0.8	1,100
1.5	155	32.0	22.0	13.0	27.5	0.8	300	32.0	33.0	18.0	27.5	0.8	500	nastaviti ……
1.8	185	32.0	24.5	15.0	27.5	0.8	300	32.0	33.0	18.0	27.5	0.8	500
2.2	225	32.0	24.5	15.0	27.5	0.8	300
2.7	275	32.0	33.0	18.0	27.5	0.8	300
3.3	335	32.0	33.0	18.0	27.5	0.8	300
3.9	395	32.0	33.0	18.0	27.5	0.8	300

RATINGS & DIMENZIJE (mm)

( F)	Radni g voltaža	1000VDC(3A)						1600Vdc (3C)						2000Vdc (3D)
	Radni g voltaža	600Vac						650Vac						700Vac
	Kod	W	H	T	P	umreti	dv/dt	W	H	T	P	umreti	dv/dt	W	H	T	P	umreti	dv/dt
0.00022	221													18.0	11.0	5.0	15.0	0.8	10,000
0.00027	271													18.0	11.0	5.0	15.0	0.8	10,000
0.00033	331													18.0	11.0	5.0	15.0	0.8	10,000
0.00047	471													18.0	11.0	5.0	15.0	0.8	10,000
0.00056	561													18.0	11.0	5.0	15.0	0.8	10,000
0.00068	681							18.0	11.0	5.0	15.0	0.8	6,000	18.0	11.0	5.0	15.0	0.8	10,000
0.00082	821							18.0	11.0	5.0	15.0	0.8	6,000	18.0	11.0	5.0	15.0	0.8	10,000
0.001	102							18.0	11.0	5.0	15.0	0.8	6,000	18.0	11.0	5.0	15.0	0.8	10,000
0.0012	122							18.0	11.0	5.0	15.0	0.8	6,000	18.0	11.0	5.0	15.0	0.8	10,000
0.0015	152							18.0	11.0	5.0	15.0	0.8	6,000	18.0	11.0	5.0	15.0	0.8	10,000
0.0018	182							18.0	11.0	5.0	15.0	0.8	6,000	18.0	11.0	5.0	15.0	0.8	10,000
0.0022	222							18.0	11.0	5.0	15.0	0.8	6,000	18.0	11.0	5.0	15.0	0.8	10,000
0.0027	272							18.0	11.0	5.0	15.0	0.8	6,000	18.0	11.0	5.0	15.0	0.8	10,000
0.0033	332							18.0	11.0	5.0	15.0	0.8	6,000	18.0	11.0	5.0	15.0	0.8	10,000
0.0039	392	13.0	11.0	5.0	10.0	0.6	6,000	18.0	11.0	5.0	15.0	0.8	6,000	18.0	11.0	5.0	15.0	0.8	10,000
0.0047	472	13.0	11.0	5.0	10.0	0.6	6,000	18.0	11.0	5.0	15.0	0.8	6,000	18.0	11.0	5.0	15.0	0.8	10,000
0.0056	562	13.0	12.0	6.0	10.0	0.6	6,000	18.0	11.0	5.0	15.0	0.8	6,000	18.0	13.5	7.5	15.0	0.8	10,000
0.0068	682	13.0	12.0	6.0	10.0	0.6	6,000	18.0	11.0	5.0	15.0	0.8	6,000	18.0	13.5	7.5	15.0	0.8	10,000
0.0082	822	18.0	11.0	5.0	15.0	0.8	3,300	18.0	12.0	6.0	15.0	0.8	6,000	26.5	15.0	6.0	22.5	0.8	5,000
0.01	103	18.0	11.0	5.0	15.0	0.8	3,300	18.0	12.0	6.0	15.0	0.8	6,000	26.5	15.0	6.0	22.5	0.8	5,000
0.012	123	18.0	11.0	5.0	15.0	0.8	3,300	18.0	13.5	7.5	15.0	0.8	6,000	26.5	15.0	6.0	22.5	0.8	5,000
0.015	153	18.0	11.0	5.0	15.0	0.8	3,300	18.0	13.5	7.5	15.0	0.8	6,000	26.5	16.0	7.0	22.5	0.8	5,000
0.018	183	18.0	13.5	7.5	15.0	0.8	3,300	18.0	14.5	8.5	15.0	0.8	6,000	26.5	16.0	7.0	22.5	0.8	5,000
0.022	223	18.0	13.5	7.5	15.0	0.8	3,300	18.0	14.5	8.5	15.0	0.8	6,000	26.5	17.0	8.5	22.5	0.8	5,000
0.027	273	18.0	14.5	8.5	15.0	0.8	3,300	26.5	15.0	6.0	22.5	0.8	3,000	26.5	18.5	10.0	22.5	0.8	5,000
0.033	333	26.5	15.0	6.0	22.5	0.8	2,100	26.5	16.0	7.0	22.5	0.8	3,000	26.5	18.5	10.0	22.5	0.8	5,000
0.039	393	26.5	15.0	6.0	22.5	0.8	2,100	26.5	17.0	8.5	22.5	0.8	3,000	26.5	22.0	12.0	22.5	0.8	5,000
0.047	473	26.5	16.0	7.0	22.5	0.8	2,100	26.5	18.5	10.0	22.5	0.8	3,000	32.0	20.0	11.0	27.5	0.8	2,200
0.056	563	26.5	16.0	7.0	22.5	0.8	2,100	26.5	18.5	10.0	22.5	0.8	3,000	32.0	22.0	13.0	27.5	0.8	2,200
0.068	683	26.5	17.0	8.5	22.5	0.8	2,100	26.5	22.0	12.0	22.5	0.8	3,000	32.0	22.0	13.0	27.5	0.8	2,200
0.082	823	26.5	18.5	10.0	22.5	0.8	2,100	32.0	20.0	11.0	27.5	0.8	2,000	32.0	24.5	15.0	27.5	0.8	2,200
0.1	104	26.5	18.5	10.0	22.5	0.8	2,100	32.0	20.0	11.0	27.5	0.8	2,000	32.0	28.0	14.0	27.5	0.8	2,200
0.12	124	32.0	20.0	11.0	27.5	0.8	1,300	32.0	22.0	13.0	27.5	0.8	2,000	32.0	33.0	18.0	27.5	0.8	2,200
0.15	154	32.0	20.0	11.0	27.5	0.8	1,300	32.0	24.5	15.0	27.5	0.8	2,000	32.0	33.0	18.0	27.5	0.8	2,200
0.18	184	32.0	22.0	13.0	27.5	0.8	1,300	32.0	24.5	15.0	27.5	0.8	2,000
0.22	224	32.0	22.0	13.0	27.5	0.8	1,300	32.0	33.0	18.0	27.5	0.8	2,000
0.27	274	32.0	24.5	15.0	27.5	0.8	1,300	32.0	33.0	18.0	27.5	0.8	2,000
0.33	334	32.0	28.0	14.0	27.5	0.8	1,300	32.0	33.0	18.0	27.5	0.8	2,000
0.39	394	32.0	33.0	18.0	27.5	0.8	1,300
0.47	474	32.0	33.0	18.0	27.5	0.8	1,300

Vrms vs. Frekvencija, tipična vrijednost

KODNI DIJAGRAM RADIJALNOG LEPA

Fig. 4 Kutija ili ekspoxy premazana

F=10 = Samo municije

F=15 Svaki drugi razmak je preskočen jer

većeg tela – Samo municije

(RT3 ili RT4)

opis	Pismo	dimenzija (mm)
opis	Pismo	RT4	Putarina.
Prečnik žice	d	0.6 / 0.8	± 0.05
Tape Pitch	P	25.4	± 1
Nagib otvora za dovod	PO	12.7	± 0.2
Centriranje provodne žice	P1	5.2	± 0.7
Centriranje tela	P2	12.7	± 1.3
Lead Spacing (Pitch)	F	15	+ 0.6; -0.1
Poravnanje komponenti	Δh	0	± 2
Visina Componenet-a iz centra trake	H	18.5	± 0.5
Širina trake nosača	W	18	+ 1; -0.5
Držite pritisnutu širinu trake	GDJE	10	Min
Hole Position	W1	9	± 0.5
Držite dolje poziciju trake	W2	3	maksimum
Prečnik otvora za dovod	Uradi	4	± 0.2
Tape Thickness	t	0.5	± 0.2
Slika	sl	4

Napomena: *Dopuštenje akumuliranog koraka manje od 1 mm u zbroju 20 parcele.

*Kontinuirana prazna komponenta manje od 3 uzastopnih komada.

*Ukupno prazno na jednom kolutu manje od 1%.

Kategorija: Metalni polipropilenski kondenzator filmaBy administrator Avgusta 9, 2020

Omogućite JavaScript u svom pretraživaču da popunite ovaj obrazac.

ime

E-mail

telefon

Poruka

Dokažite da ste čovjek odabirom kamion.

Follow us :