Všeobecné elektrolytické kondenzátory ▏85 ℃ 2 000 ~ 3 000 hodín ▏cafb
85℃, 2000hod pre Dia < 8mm, 3000hod Dia > 10mm
Standard series for general purpose
Replaces RC, RE & RH Series
ŠPECIFIKÁCIE
| Položka | Výkon | |||||||||||||||||||||||||||||
| Prevádzková teplota. | -40°C ~ +85 °C | |||||||||||||||||||||||||||||
| Tolerancia kapacity | ± 20% (120Hz, 20° C) | |||||||||||||||||||||||||||||
|
Únikový prúd (pri 20°C) |
Menovité napätie | < 100Vložka | >100Vložka | |||||||||||||||||||||||||||
| Čas | Po 2 minút | Po 5 minút | ||||||||||||||||||||||||||||
|
Únikový prúd |
I = 0,01 CV alebo 3 (μA)
čo je väčšie |
CV < 1000
I = 0.03CV + 15(μA) |
CV > 1000
I = 0.02CV + 25(μA) |
|||||||||||||||||||||||||||
| Where C = rated capacitance in F. V = rated DC working volatage in V. | ||||||||||||||||||||||||||||||
| Menovité napätie | 6.3 | 10 | 16 | 25 | 35 | 50 | 63 | 100 | 160 | 200 | 250 | 350 | 400 | 450 | ||||||||||||||||
| Dissipation Factor Tanδ
pri 120 Hz, 20° C |
Tan 5 (max) | 0.23 | 0.20 | 0.16 | 0.14 | 0.12 | 0.10 | 0.09 | 0.08 | 0.12 | 0.14 | 0.17 | 0.20 | 0.25 | 0.25 | |||||||||||||||
| When the capacitance exceeds 1000μF, 0.02 shall be added for every 1000μF increase. | ||||||||||||||||||||||||||||||
|
Nízkoteplotné charakteristiky (pri 120 Hz) |
Impedančný pomer nesmie presiahnuť hodnoty uvedené v tabuľke nižšie. | |||||||||||||||||||||||||||||
| Menovité napätie | 6.3 | 10 | 16 | 25 | 35 | 50 | 63 | 100 | 160 | 200 | 250 | 350 | 400 | 550 | ||||||||||||||||
|
Impedance Radio |
Z(-25° C) | φD<16 | 6 | 4 | 3 | 3 | 2 | 2 | 2 | 2 |
3 |
6 |
8 |
12 |
14 |
16 |
||||||||||||||
| /Z(+20° C) | φD>16 | 8 | 6 | 4 | 4 | 3 | 3 | 3 | 3 | |||||||||||||||||||||
| Z(-40° C) | φD<16 | 10 | 8 | 6 | 6 | 4 | 3 | 3 | 3 | 4 | 8 | 10 | 10 | 10 | 10 | |||||||||||||||
| /Z(+20° C) | φD>16 | 18 | 16 | 12 | 10 | 8 | 8 | 6 | 6 | |||||||||||||||||||||
|
Load Life test at 20°C (after rated voltage is applied at 85°C for 2000 |
Testovací čas | 2000hod(3000hrs for φ D > 10mm) |
Shelf Life at 20°C after exposure to 85 pre 1000 hours with |
Testovací čas | 1000hod | |||||||||||||||||||||||||
| Zmena kapacity | Vnútri < ±20% of initial value | Zmena kapacity | Vnútri < ±20% of initial value | |||||||||||||||||||||||||||
| Rozptyl | Menej ako 200% of specific value | Rozptyl | Menej ako 200% of specific value | |||||||||||||||||||||||||||
| / 3000 hodiny) | Únikový prúd | V rámci špecifikovanej hodnoty | no voltage | Únikový prúd | V rámci špecifikovanej hodnoty | |||||||||||||||||||||||||
|
Zvlnený prúd & Násobiče frekvencie |
Frekv. (Hz)
Čiapka. (μf) |
60
(50) |
120 |
500 |
1K |
10K
hore |
||||||||||||||||||||||||
| Pod 100 | 0.70 | 1.00 | 1.30 | 1.40 | 1.50 | |||||||||||||||||||||||||
| 100 do 1000 | 0.75 | 1.00 | 1.20 | 1.30 | 1.35 | |||||||||||||||||||||||||
| 1000 a vyššie | 0.80 | 1.00 | 1.10 | 1.12 | 1.15 | |||||||||||||||||||||||||
| Zvlnený prúd & Násobiče teploty | Teplota (° C) | Pod 50 | 70 | 85 | ||||||||||||||||||||||||||
| Násobiteľov | 1.78 | 1.4 | 1.00 | |||||||||||||||||||||||||||
| Normy | Spĺňa charakteristiku W JIS C 5141 | |||||||||||||||||||||||||||||
DIMENSION & PRÍPUSTNÝ Zvlnený prúd
Zvlnený prúd :mA/rms at 120Hz, 85° C
| V.DC
m F kód |
6.3Vložka (Ú. v) | 10Vložka (1A) | 16Vložka (1C) | 25Vložka (1E) | 35Vložka (1Vložka) | 50Vložka (1H) | 63Vložka (1J) | 100Vložka (2A) | |||||||||
| ΦD x L | mA | ΦD xL | mA | ΦD x L | mA | ΦD x L | mA | ΦD x L | mA | ΦD x L | mA | ΦD x L | mA | ΦD x L | mA | ||
| 0.1 | 0R1 | 5 x 11 | 1.5 | 5 x 11 | 3 | 5 x 11 | 3 | ||||||||||
| 0.2 | R22 | 5 x 11 | 3.5 | 5 x 11 | 5 | 5 x 11 | 5.8 | ||||||||||
| 0.3 | R33 | 5 x 11 | 5 | 5 x 11 | 8 | 5 x 11 | 8.8 | ||||||||||
| 0.5 | R47 | 5 x 11 | 7 | 5 x 11 | 10 | 5 x 11 | 12 | ||||||||||
| 1.0 | 10 | 5 x 11 | 15 | 5 x 11 | 17 | 5 x 11 | 22 | ||||||||||
| 2.2 | 2R2 | 5 x 11 | 29 | 5 x 11 | 28 | 5 x 11 | 33 | ||||||||||
| 3.3 | 3R3 | 5 x 11 | 35 | 5 x 11 | 34 | 5 x 11 | 40 | ||||||||||
| 4.7 | 4R7 | 5 x 11 | 31 | 5 x 11 | 40 | 5 x 11 | 42 | 5 x 11 | 45 | 5 x 11 | 48 | ||||||
| 10 | 100 | 5 x 11 | 49 | 5 x 11 | 54 | 5 x 11 | 58 | 5 x 11 | 65 | 5 x 11 | 70 | 5 x 11
6.3 x 11 |
59
80 |
||||
| 22 | 220 | 5 x 11 | 70 | 5 x 11 | 75 | 5 x 11 | 80 | 5 x 11 | 87 | 5 x 11 | 95 | 6.3 x 11 | 115 | 6.3 x 11
8 x 11.5 |
115
135 |
||
| 33 | 330 | 5 x 11 | 72 | 5 x 11 | 84 | 5 x 11 | 90 | 5 x 11 | 97 | 5 x 11
6.3 x 11 |
108
115 |
5 x 11
6.3 x 11 |
136
163 |
6.3 x 11
8 x 11.5 |
140
340 |
8 x 11.5
10 x 16 |
145
195 |
| 47 | 470 | 5 x 11 | 90 | 5 x 11 | 100 | 5 x 11 | 110 | 5 x 11 | 115 | 5 x 11
6.3 x 11 |
130
145 |
6.3 x 11 | 165 | 6.3 x 11
8 x 11.5 |
170
397 |
10 x 13
10 x 16 |
235
255 |
DIMENSION & PRÍPUSTNÝ Zvlnený prúd
Zvlnený prúd :mA/rms at 120Hz, 85° C
* = Ploché (neodvetrané) gumená zátka.
Other units are made with raised (odvzdušnené) gumená zátka
PRÍKLAD ČÍSLA ČASTI
CAFB 471 M 1C BK 100 125
VZDIALENOSŤ A PRIEMER VODOV
| φD | 5 | 6.3 | 8 | 10 | 13 | 16 | 18 | 22 | 25 |
| P | 2.0 | 2.5 | 3.5 | 5.0 | 5.0 | 7.5 | 7.5 | 10 | 12.5 |
| φd | 0.5 | 0.6 | 0.8 | 1.0 | |||||
| a | 1.0 | 1.5 | 2.0 | ||||||
| b | 0.5 | ||||||||
HOW TO MAKE A ČASŤ NUMBER
- séria:CAFB
- Kapacita: Rated capacitance in µF is represented by a three digit number. The first two digits are the significant figures of the nominalcapacitance and the third digit indicates the number of zeros following these The decimal point is represented by the capital letter R. Please refer to the following example.
uF 0.1 0.47 1 4.7 10 47 100 470 1000 4700 10000 Číslo dielu 0R1 R47 010 4R7 100 470 101 471 102 472 103 - Tolerancia: (20% ISTypical)
kód K M T W Tolerancia + 10% + 20% + 50% /-10% + 100% /-10% - Menovité napätie: Voltage in volts (Vložka) is represented by a two digit code showing the rated working voltage indicated asfollows:
Napätie (WV) 6.3 10 16 25 35 40 50 63 80 100 160 200 250 350 400 450 kód 0J 1A 1C 1E 1Vložka 1G 1H 1J 1K 2A 2C 2D 2E 2Vložka 2G 2W - Lead Forming &Package
kód Lead Description Balenie BC Bending Cut Bulk Packing BK Straight Lead Bulk Packing CC Lead Cutting Bulk Packing FC Lead Forming & Cutting Bulk Packing FF Lead Forming Bulk Packing SC Snap-in & Cutting Bulk Packing SD Cathode Lead Beading Bulk Packing SF Snap-in, Forming & Cutting Bulk Packing na Straight Lead Tape & Munícia TA Lead Forming Tape & Munícia SR Straight Lead Tape & Navijak TR Lead Forming Tape & Navijak
- CanSize
Priemer (mm)x10 & Length (mm)x10. Can Size 063110, represents 6.3mm diameter by 11mm length.
- Wire and SleeveType*
= (Omit) Olovo (Pb) Free Wire & PVC Sleeve
`P = Lead (Pb) Free Wire & PET Sleeve
*Poznámka: All standard RFE Aluminum Electrolytic Capacitors are Lead (Pb) free and RoHS compliant. PET sleeve is available for those companies
that also require PVC free product.
LEADED TAPING & PACKAGING SPECIFICATIONS
Taping Specification for Radial Lead Type
| Balenie | TA,TR (Obr. 1) | na, SR (Obr. 2, 3, 4) | ||||||||||||||||||
| L | L ≤ 7mm | L ≥ 7mm | L ≤ 7mm | L ≥ 7mm | ||||||||||||||||
| fD
Symbol |
f 3 |
f 4 |
f 5 |
f6.3 |
f 8 |
f 5 |
f 6.3 |
f 8 |
f 3 |
f 4 |
f 5 |
f 6.3 |
f 8 |
f 5 |
f 6.3 |
f 8 |
Tol. |
f 10 |
f 13 |
Tol. |
| fd | 0.4 | 0.45 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.6 | 0.4 | 0.45 | 0.45 | 0.45 | 0.45 | 0.5 | 0.5 | 0.6 | ± 0.05 | 0.6 | 0.6 | ± 0.05 |
| F | 5.0 | 5.0 | 5.0 | 5.0 | 5.0 | 5.0 | 5.0 | 5.0 | 2.5 | 2.5 | 2.5 | 2.5 | 3.5 | 2.5 | 2.5 | 3.5 | -0.2/+0.8 | 5.0 | 5.0 | -0.2/+0.8 |
| P | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | ± 1.0 | 12.7 | 25.4 | ± 1.0 |
| P0 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | 12.7 | ± 0.2 | 12.7 | 12.7 | ± 0.30 |
| P2 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | ± 1.0 | 6.35 | 6.35 | ± 1.3 |
| P1 | 3.85 | 3.85 | 3.85 | 3.85 | 3.85 | 3.85 | 3.85 | 3.85 | 5.1 | 5.1 | 5.1 | 5.1 | 4.6 | 5.1 | 5.1 | 4.6 | ± 0.5 | 3.85 | 3.85 | ± 0.7 |
| H | 17.5 | 17.5 | 17.5 | 17.5 | 17.5 | 18.5 | 18.5 | 20.0 | 17.5 | 17.5 | 17.5 | 17.5 | 17.5 | 18.5 | 18.5 | 18.5 | ± 0.75 | 18.5 | 18.5 | ± 0.75 |
| H0 | 16.0 | 16.0 | 16.0 | 16.0 | 16.0 | 16.0 | 16.0 | 16.0 | — | — | — | — | — | — | — | — | ± 0.5 | — | — | ± 0.5 |
| W | 18.0 | 18.0 | 18.0 | 18.0 | 18.0 | 18.0 | 18.0 | 18.0 | 18.0 | 18.0 | 18.0 | 18.0 | 18.0 | 18.0 | 18.0 | 18.0 | ± 0.5 | 18.0 | 18.0 | ± 0.5 |
| W0 | 12.0 | 12.0 | 12.0 | 12.0 | 12.0 | 12.0 | 12.0 | 12.0 | 12.0 | 12.0 | 12.0 | 12.0 | 12.0 | 12.0 | 12.0 | 12.0 | Min | 12.0 | 12.0 | Min. |
| W1 | 9.0 | 9.0 | 9.0 | 9.0 | 9.0 | 9.0 | 9.0 | 9.0 | 9.0 | 9.0 | 9.0 | 9.0 | 9.0 | 9.0 | 9.0 | 9.0 | ± 0.5 | 9.0 | 9.0 | ± 0.5 |
| W2 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | Max. | 1.5 | 1.5 | Max. |
| f D0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | ± 0.2 | 4.0 | 4.0 | ± 0.2 |
| t | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | ± 0.2 | 0.7 | 0.7 | ± 0.2 |
| H | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | ± 1.0 | 0 | 0 | ± 1.0 |
| l | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | Max. | 1.0 | 1.0 | Max. |
| A | 11 | 11 | 11 | 11 | 11 | 11 | 11 | 11 | 11 | 11 | 11 | 11 | 11 | 11 | 11 | 11 | Max. | 11 | 11 | Max. |
| Obr. Nie. | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 2 | 2 | 2 | 3 | 3 | 2 | 3 | 3 | 3 | 3,4 | ||
Packaging Quantity
| D | 3 | 4 | 5 | 6.3 | 8 | 10 | 13 |
| TA, na | 3000 | 2000 | 2000 | 2000 | 1000 | 500 | 250 |
| TR,SR | 3000 | 1500 | 1200 | 1000 | 800 | 500 | 500 |
NOTES:
- The above quantities are typical. Quantities may
- The component will be oriented on the tape so that the positive lead is leading or the negative lead is leading, depending on the customer’srequest
Funkcie
◆ 2000hrs(3000hrs for φ D > 10mm) assured
◆ SlimType
◆ V súlade s Rohs











