AC Ceranic Disc Safety Capacitor | CCDG CCDF
• Complies with IEC60384-14
• Single Layer AC Disc Safety Capacitor
• Coated with flame-retardant epoxy resin (conforming to UL94V-0)
• Lead with tin plated copper wire, inert metal copper or silver as a coating after the electrode, see diagram
• Halogen-free available
FEATURES
◆ Capacitance range：CCDF(X1Y2) 1pF to 0.015uF | CCDG type (X1Y1) 1pF to0.01uF
◆ Ratedvoltage: CCDF(X1Y2) X1:440/400Vac Y2:300/250Vac CCDG type (X1Y1) X1:660/400Vac Y1:500/250Vac
◆ Dielectricstrength: CCDF(X1Y2) 2500Vac|3E(50Hz-60Hz, 50mA max.) for 1minute. CCDG type (X1Y1) 4000Vac|3G(50Hz-60Hz, 50mA max.) for 1minute.
INTRODUCTION
• Complies with IEC60384-14
• Single Layer AC Disc Safety Capacitor
• Coated with flame-retardant epoxy resin (conforming to UL94V-0)
• Lead with tin plated copper wire, inert metal copper or silver as a coating after the electrode, see diagram
• Halogen-free available
RECOGNITIONS
| Approve d monogra
m |
Country |
Standards |
Rated Voltage | Certification Number | ||
| CCDF(X1Y2) | CCDG(X1Y1) | CCDF(X1Y2) | CCDG(X1Y1) | |||
 |
USA |
UL 60384-14 |
X1 : 400/440/500Vac Y2 : 250/300/500Vac | X1 : 400/760Vac Y1
: 250/400/500Vac |
E104572 |
|
| Canada | ||||||
  |
Germany |
EN60384-14 (0565-1-1) : 2014-04 EN60384-14: 2013-08 IEC 60384-14 ed. 4 |
X1 : 440/400Vac Y2 : 300/250Vac |
X1 : 660/400Vac Y1 : 500/250Vac |
40016156 |
4016157 |
 |
Korea |
KC60384-14 / KC60384-1 |
250Vac |
SZ03004-17002 |
SZ03004-17001 |
|
 |
China |
GB/T 6346.14-2015 |
X1 : 400Vac Y2 : 250Vac | X1 : 400Vac Y1 : 250Vac |
CQC03001008380 |
CQC03001008379 |
ELECTRICAL CHARACTERISTICS
| Characteristics | CCDF type (X1Y2) | CCDG type (X1Y1) |
| Capacitance range | 1pF to 0.015uF | 1pF to 0.01uF |
| Rated voltage | X1: 440/400Vac Y2:
300/250Vac |
X1: 660/400Vac Y1:
500/250Vac |
|
Dielectric strength |
2500Vac|3E (50Hz-60Hz,
50mA max.) for 1 minute. |
4000Vac|3G (50Hz-60Hz, 50mA
max.) for 1 minute. |
|
Capacitance |
Within the specifiedtolerance.
Y5P, Y5U, Y5V, X7R measured at 1KHz±20% C0G, SL measured at 1MHz±20% Both are 1Vrms, 25℃ |
|
|
Dissipation Factor (tanδ) or Q Value |
SL and C0G: Y5P, Y5U, X7R: Y5V:
Q ≥ 400+20CR (CR < 30pF) tan δ: 0.025 max. tan δ: 0.050 max. Q ≥ 1000 (CR ≥ 30pF) Measured condition see “Capacitance” |
|
| Insulation resistance | 10,000MΩ minimum at 500VDC for 1 minute. | |
| Operating
temperat ure |
-55℃ to 12 5℃ | |
HOW TO ORDER
| CCDG | F 472 M 3E | 10 | Y | 5 |
| (1) | (2) (3) (4) (5) | (6) | (7) | (8) |
Type Code: CCDG class X1-Y2 ; CCDF class X1-Y1
Temperature Characteristic
| Code | Temp. Coefficie
nt |
Code | Temp. Coefficie
nt |
Code | Temp. Coefficie
nt |
| C|N | C0G |NPO | P | Y5P | E | Y5U |
| L | SL | B | X7R | F | Y5V |
Nominal capacitance
Expressed by three-digit alphanumeric. The unit is pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two numbers. If there is a decimal point in between first two figures, it is expressed by the capital letter “R”. See below examples
| Code | Capacitance | Code | Capacitance | Code | Capacitance |
| 5R1 | 5.1pF | 100 | 10pF | 472 | 4700pF |
| 8R0 | 8pF | 101 | 100pF | 103 | 0.01uF |
Capacitance Tolerance Code
| Code | Tolerance | Code | Tolerance | Code | Tolerance |
| C | ± 0.25pF | J | ± 5% | M | ± 20% |
| D | ± 0.50pF | K | ± 10% | Z | +80/-20% |
Minimum Test Voltage (AC) : X1Y2 = AC2K5 3E , X1Y1 = AC4KV 3G
Lead Spacing (F)
| Code | Lead spacing (F) | Code | Lead spacing (F) |
| 5 | 5.0±0.8mm | 7 | 7.5±0.8mm |
| 6 | 6.35±0.8mm | 10 | 10.0±0.8mm |
Lead style
| Code | S | Y | X | W | Z |
|
Lead Style |
 |
 |
 |
 |
 |
Lead length & packagestyle:
Omitted for un-cut bulk pack
5 = 5+/-1mm, bulk pack, 6 = 6+/-1mm … etc.
TB = Ammo, TR = Reel
INTRODUCTION ◆ Complies with IEC60384-14 ◆ Single Layer AC Disc SafetyCapacitor ◆ Coated with flame-retardant epoxy resin (conforming to UL94V-0) ◆ Lead with tin plated copper wire, inert metal copper or silver as a coating after the electrode, see diagram ◆ Halogen-free available
